Fivem

The AMD Ryzen 5 5500X3D and AMD Radeon RX 9060 combination presents a fascinating study in system balance for Fivem. The data shows a configuration where the GPU becomes the primary determinant of performance at higher resolutions, while the CPU’s capabilities are exposed at lower settings. This analysis breaks down the measured frame rates to understand the role each component plays and what users can expect across the spectrum of settings and resolutions.

Resolution Scaling

The measured FPS data reveals a predictable yet notable decline in performance as resolution increases from 1920x1080 to 3840x2160. At High settings, the average frame rate drops from 111 FPS at 1080p to 73 FPS at 1440p, and further to 40 FPS at 4K. This represents a significant 64% reduction in frame rate from 1080p to 4K, indicating that the rendering load scales heavily with pixel count. The trend is consistent across all settings presets, with the drop being most pronounced in the highest quality modes.

The scaling pattern suggests that the AMD Radeon RX 9060 is the limiting factor as resolution increases. The GPU’s 8 GB of GDDR6 memory and 128-bit bus width, providing 288.0 GB/s of bandwidth, are likely saturated at 4K, particularly with higher detail levels. At 1080p, the frame rates are high enough that the CPU can keep up, but as the pixel count rises, the GPU’s compute and memory subsystems become the bottleneck. The transition from 1440p to 4K is particularly steep, with Ultra settings falling from 56 FPS to 31 FPS, a 45% drop that underscores the GPU’s struggle with the 4K workload.

Interestingly, the scaling from Low to Ultra settings at each resolution shows that the GPU is not the sole constraint. At 1080p, the difference between Low (175 FPS) and Ultra (86 FPS) is 89 FPS, suggesting that the CPU still has headroom to drive higher frame rates when the GPU is not overly burdened. This indicates that the Ryzen 5 5500X3D, with its 6 cores and 12 threads, is capable of delivering high FPS in Fivem, but only if the GPU can keep pace. The data shows that the system is well-balanced at 1080p, but the GPU becomes the clear limiting component as resolution climbs.

GPU Role

The AMD Radeon RX 9060 is built on the RDNA 4.0 architecture, using the Navi 44 chip on a 4 nm process. Its 1792 shading units, 112 texture mapping units, and 64 ROPs are complemented by a boost clock of 2990 MHz and a game clock of 2400 MHz. The GPU’s memory configuration includes 8 GB of GDDR6 on a 128-bit bus, providing 288.0 GB/s of bandwidth. These specifications position the card in the mid-range segment, as evidenced by its 59th percentile ranking among all GPUs and an average benchmark score of 16014.

In Fivem, the GPU’s role becomes more pronounced at higher resolutions and settings. At 4K Ultra, the average FPS of 31 is below playable thresholds for most users, indicating that the GPU is overwhelmed by the combination of high pixel count and complex rendering. The memory bandwidth of 288.0 GB/s appears to be a limiting factor, as Fivem’s open-world environment can be demanding on memory throughput. The 8 GB VRAM capacity may also be insufficient for 4K Ultra textures, though the data does not explicitly show memory capacity issues.

The GPU’s performance relative to its rivals is telling. The nearest rival, the NVIDIA GeForce RTX 3060 Ti, has an average score of 16129, just 0.7% higher than the RX 9060’s 16014. This indicates that the RX 9060 is performance-equivalent to a previous-generation mid-range card, which aligns with its 1080p and 1440p results. At 1080p High, the 111 FPS average suggests the GPU is well-suited for high-refresh-rate gaming, but the 4K results show its limitations. The GPU’s DirectX 12 benchmark score of 44 is notably low, though this may not directly correlate with Fivem’s performance, which relies on its own engine and API usage.

CPU Role

The AMD Ryzen 5 5500X3D is a 6-core, 12-thread processor from the 5000 series, based on the Zen 3 architecture (Vermeer). It has a base clock of 3.00 GHz and a boost clock of 4.00 GHz, with a 96 MB shared L3 cache. The CPU’s 105 W TDP and socket AM4 compatibility make it a drop-in upgrade for many existing systems. In benchmark tests, it scores 2941 on Passmark single-thread and 20363 on multithread, with an average benchmark score of 37018, placing it in the 85th percentile of all CPUs.

In Fivem, the CPU’s role is most evident at lower resolutions and settings where the GPU is less stressed. At 1080p Low, the system achieves 175 FPS, which is likely near the CPU’s maximum frame delivery capability in this game. The single-thread performance of 2941 is crucial for Fivem, which is known to be sensitive to CPU performance in multiplayer scenarios. The 3D V-Cache, providing 96 MB of shared L3, helps with data-heavy workloads, though Fivem may not fully utilize this advantage.

The CPU’s performance relative to rivals shows it is competitive. The AMD Ryzen 5 5600F has an average score of 36945, just 0.2% lower than the 5500X3D, indicating near-identical performance. The Intel Core i9-12900T is slightly faster at 37112, a 0.3% difference. This suggests that the 5500X3D is a solid mid-range option that will not bottleneck the GPU in most scenarios. At 1440p High, the 73 FPS average indicates that the CPU is still capable of driving high frame rates, but the GPU begins to limit performance. The data shows that the CPU’s 6 cores and 12 threads are sufficient for Fivem, as the game does not appear to be heavily multithreaded based on the scaling behavior.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the user’s resolution and frame rate priorities. At 1920x1080, the High preset delivers 111 FPS, which is smooth for most gameplay. However, the Medium preset at 138 FPS offers a better balance, with a 24% increase in frame rate over High while maintaining acceptable visual quality. The Low preset at 175 FPS is ideal for competitive play or high-refresh-rate monitors, but it sacrifices visual fidelity. The Ultra preset at 86 FPS is playable but not significantly better than High, making it a less efficient choice.

At 2560x1440, the Medium preset provides 91 FPS, which is the best balance of performance and quality. The High preset at 73 FPS is still smooth, but Medium offers a 25% improvement with minimal visual difference. The Low preset at 115 FPS is excellent for fast-paced gameplay, while Ultra at 56 FPS may be too demanding for the 60 FPS target. For users with 144Hz monitors, the Low preset is the only option that consistently exceeds 100 FPS, while Medium can dip to 77 FPS in the minimum frame rate data.

At 3840x2160, the Low preset at 64 FPS is the only setting that approaches playable frame rates. The Medium preset at 50 FPS is borderline, with a minimum of 43 FPS that may cause noticeable stuttering. The High preset at 40 FPS and Ultra at 31 FPS are not recommended for a smooth experience. For 4K users, the Low preset is the practical choice, though even this may require additional tweaking to maintain consistent performance. Overall, the Medium preset at 1080p and 1440p offers the best experience per the measured rows, balancing frame rate and visual quality.

How This Combo Ranks

The combination of the AMD Ryzen 5 5500X3D and AMD Radeon RX 9060 ranks 1714 out of 3005 tested combos in Fivem, placing it in the lower-middle range of the database. This ranking reflects the GPU’s mid-range status, as the CPU is relatively strong but the GPU limits overall performance. The combo’s percentile ranking is not explicitly given, but the position suggests that many other configurations, likely with higher-end GPUs, outperform it in this title.

The ranking indicates that while this combo is capable of delivering playable frame rates at 1080p and 1440p, it falls short of the top-tier configurations in the database. The GPU’s 59th percentile ranking among all GPUs, combined with the CPU’s 85th percentile, suggests that the system is CPU-heavy relative to its GPU. This is reflected in the Fivem results, where the CPU’s strong single-thread performance is not fully utilized at higher resolutions due to GPU limitations. The combo’s rank of 1714 out of 3005 places it in the 57th percentile of all tested combos, indicating that it is slightly above average but not exceptional for Fivem.

Measured FPS Breakdown

The measured FPS data provides a detailed look at the combo’s performance across all resolutions and settings. At 1920x1080, the Low preset achieves 175 FPS average, while Medium reaches 138 FPS with a minimum of 117 and maximum of 159. High delivers 111 FPS, and Ultra drops to 86 FPS. These results show that the combo is capable of high-refresh-rate gaming at 1080p, with even Ultra settings exceeding 60 FPS.

At 2560x1440, the Low preset averages 115 FPS, while Medium hits 91 FPS with a minimum of 77 and maximum of 105. High averages 73 FPS, and Ultra falls to 56 FPS. The 1440p results indicate that the combo can handle most settings at playable frame rates, but Ultra may require a lower refresh rate monitor.

At 3840x2160, the Low preset averages 64 FPS, Medium reaches 50 FPS with a minimum of 43 and maximum of 58. High averages 40 FPS, and Ultra drops to 31 FPS. The 4K results show that the combo is only viable at Low settings, and even then, the frame rate is not consistently smooth. The data shows a clear progression of performance degradation as resolution increases, with the GPU being the primary bottleneck at 4K.

FAQ

Q: What is the best resolution for this combo in Fivem?

A: The data shows that 1920x1080 provides the highest frame rates, with Low at 175 FPS and Medium at 138 FPS. At 2560x1440, Medium offers 91 FPS, making it viable, while 3840x2160 only reaches 64 FPS at Low settings.

Q: How does the CPU compare to its nearest rivals?

A: The AMD Ryzen 5 5500X3D has an average benchmark score of 37018, which is 0.2% higher than the AMD Ryzen 5 5600F (36945) and 0.2% higher than the Intel Core Ultra 5 225 (36938). It is 0.3% lower than the Intel Core i9-12900T (37112).

Q: Is the GPU sufficient for 4K gaming in Fivem?

A: The data indicates that 4K gaming is only playable at Low settings, with an average of 64 FPS. Medium drops to 50 FPS, and High and Ultra fall to 40 and 31 FPS respectively, which are below smooth playable thresholds.

Q: What settings provide the best balance of performance and quality?

A: At 1920x1080 and 2560x1440, the Medium preset offers the best balance, with 138 FPS and 91 FPS respectively. At 3840x2160, Low is the only recommended setting due to its 64 FPS average.

Q: How does the GPU rank among all GPUs?

A: The AMD Radeon RX 9060 is in the 59th percentile of all GPUs, with an average benchmark score of 16014. Its nearest rival, the NVIDIA GeForce RTX 3060 Ti, scores 16129, which is 0.7% higher.

Q: What is the combo’s overall ranking in Fivem?

A: The combo ranks 1714 out of 3005 tested combinations, placing it in the lower-middle range. This reflects the GPU’s mid-range performance, despite the CPU’s strong showing in the 85th percentile.