Fivem
This combination offers playable performance with an average of 30 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 14 | 13 | 18 | 23 |
| 1440p QHD | 19 | 24 | 31 | 41 |
| 1080p Full HD | 29 | 36 | 51 | 59 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Fivem with AMD Ryzen 5 4600G + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis
The AMD Ryzen 5 4600G is a 6-core, 12-thread processor based on the Zen 2 architecture, with a base clock of 3.70 GHz and a boost clock of 4.20 GHz. It sits in the 75th percentile among all CPUs in the database, and its average benchmark score of 17489 places it in a dead heat with the AMD Ryzen 3 PRO 5355GE (deltaPct 0) and the Intel Core i5-12450H (deltaPct 0.1). It trails the Intel Core i3-14100T by 0.8% and the Intel Core i3-13100F by 1% in raw average score. For a multiplayer title like Fivem, which is heavily dependent on single-thread performance for server-side simulation and physics, the 4600G’s 3dmark_single_thread score of 726 and Cinebench R23 single-core score of 1919 indicate adequate, though not class-leading, responsiveness. The processor’s 8 MB of shared L3 cache is modest by modern standards, but its 12 threads provide enough parallelism to handle background tasks while the game engine works through its main simulation loop.
The companion GPU, the NVIDIA GeForce GTX 1050 Ti, is a much older Pascal-generation part with 768 shading units and 4 GB of GDDR5 memory on a 128-bit bus. Its 2.138 TFLOPS of FP32 performance and 112.1 GB/s of memory bandwidth place it in the 30th percentile among all GPUs, with an average benchmark score of 5316. Its nearest rivals in the database are the NVIDIA GeForce 930A (deltaPct 0), the NVIDIA GeForce 940M (deltaPct 0.4), and the AMD Radeon R7 240 (deltaPct 0.7), which are all mobile or entry-level desktop parts. The GTX 1050 Ti is clearly the limiting factor in this combo, as the CPU’s 75th percentile standing vastly outpaces the GPU’s 30th percentile ranking. Benchmark results confirm this: at 1080p Low, the combo achieves 59.2 FPS, which is nearly double the 1080p Ultra result of 28.6 FPS, showing that the GPU’s fill rate and shading capacity are the primary constraints once settings rise.
CPU Role — cores, clocks, and how they relate to this game's results
Fivem is a multiplayer modification framework that runs on top of Grand Theft Auto V, and its performance profile is unusual. The game’s simulation loop is largely single-threaded, meaning that the CPU’s ability to execute that loop quickly is critical for maintaining high frame rates. The Ryzen 5 4600G’s boost clock of 4.20 GHz is respectable for this task, and its 3dmark_single_thread score of 726 suggests it can handle the game’s logic without becoming a bottleneck in most scenarios. However, the data shows that this is not a CPU-limited situation for this combo at most settings. Look at the 1080p results: lowering settings from High to Low increases average FPS from 35.5 to 59.2, a gain of 67%. If the CPU were the limiting factor, changing GPU workload settings would have little effect on FPS. The fact that FPS scales so dramatically with settings proves the GTX 1050 Ti is the choke point.
The 6-core, 12-thread configuration of the 4600G is more than sufficient for Fivem’s typical workload. The game rarely utilizes more than a few threads effectively, and the 4600G’s multi-threaded capabilities (Cinebench R23 multicore score of 13593) are overkill for this title. In practice, the CPU’s headroom means that even when the GPU is fully saturated, the processor can keep up with the game’s draw calls and entity updates without stuttering. The 12 threads also help when other software, such as Discord or a browser, is running in the background, as those processes won’t compete with the game for the same cores. The processor’s 75th percentile standing among all CPUs reinforces that this is not a weak part; it simply cannot rescue a GPU that is four generations older.
FAQ — 4-6 Q&A pairs answerable from FACT PACK data
Q: What is the best resolution to use with this CPU/GPU combo for a playable experience?
A: Based on the measured FPS, 1920x1080 is the only resolution where the combo achieves consistently playable frame rates. At 1080p Low, it hits 59.2 FPS average, and at 1080p Medium it reaches 50.5 FPS. At 2560x1440, even on Low settings, the average drops to 40.9 FPS, and at 3840x2160, all settings fall below 23 FPS.
Q: How does the Ryzen 5 4600G compare to its nearest CPU rivals in raw performance?
A: The 4600G has an average benchmark score of 17489, which is statistically identical to the AMD Ryzen 3 PRO 5355GE (17482, deltaPct 0) and the Intel Core i5-12450H (17475, deltaPct 0.1). It is slightly behind the Intel Core i3-14100T (17636, deltaPct -0.8) and Intel Core i3-13100F (17665, deltaPct -1), but the differences are under 1%.
Q: Is the GTX 1050 Ti the bottleneck in this system?
A: Yes, the data strongly indicates the GPU is the limiting component. The CPU sits in the 75th percentile of all CPUs, while the GPU sits in only the 30th percentile. Furthermore, FPS scales dramatically with settings changes (from 28.6 FPS at 1080p Ultra to 59.2 FPS at 1080p Low), which is characteristic of a GPU-bound scenario.
Q: Can this combo handle 4K gaming in Fivem?
A: No. At 3840x2160, the highest average FPS recorded is 22.8 on Low settings. High settings yield 12.6 FPS, Medium yields 18 FPS, and Ultra yields 13.8 FPS. These numbers are far below the 30 FPS threshold typically considered minimum for playability.
Q: What is the difference between Low and Ultra settings at 1080p?
A: The jump from Low to Ultra at 1080p costs 30.6 FPS on average, dropping from 59.2 FPS to 28.6 FPS. The step from Low to Medium loses 8.7 FPS (to 50.5), and from Medium to High loses an additional 15 FPS (to 35.5). The largest single penalty comes from moving to Ultra settings.
Q: How does the GTX 1050 Ti compare to its nearest GPU rivals?
A: The GTX 1050 Ti has an average benchmark score of 5316, which is nearly identical to the NVIDIA GeForce 930A (5317, deltaPct 0) and NVIDIA GeForce 940M (5297, deltaPct 0.4). It slightly outperforms the AMD Radeon R7 240 (5280, deltaPct 0.7) but trails the AMD Radeon R7 M445 (5361, deltaPct -0.8).
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The measured FPS data shows a clear and predictable pattern when moving up in resolution. At 1080p Low, the combo averages 59.2 FPS. At 2560x1440 Low, that figure drops to 40.9 FPS, a 31% reduction. At 3840x2160 Low, it falls to 22.8 FPS, a further 44% reduction from 1440p. This scaling is consistent with a GPU that is running out of pixel fill rate and memory bandwidth. The GTX 1050 Ti has a pixel rate of 44.54 GPixel/s and a memory bandwidth of 112.1 GB/s, both of which are severely taxed at higher resolutions.
The pattern holds across all settings. At High settings, the combo goes from 35.5 FPS at 1080p to 24.2 FPS at 1440p (a 32% drop) and then to 12.6 FPS at 4K (a 48% drop from 1440p). At Medium settings, the progression is 50.5 → 31.3 → 18.0 FPS. This consistent scaling behavior indicates that the limiting component is the GPU’s raw throughput, not the CPU. If the CPU were the bottleneck, we would expect to see the FPS gap between resolutions narrow at lower settings, since the CPU would still be doing the same amount of work. Instead, the FPS drops proportionally with resolution, which is the classic signature of a GPU-bound system.
The implication for builders is straightforward: this combo is a 1080p solution. Attempting to run at 1440p will require dropping to Low settings to get near 40 FPS, which is marginal for a multiplayer game where frame timing consistency matters. The 4K results are unusable for any gameplay scenario, with the best-case (Low) producing only 22.8 FPS average.
Settings Recommendations — which preset gives the best experience per the measured rows
For this specific combo, the data points to a clear recommendation: use Medium settings at 1920x1080. At 1080p Medium, the combo averages 50.5 FPS, which is a far more playable experience than the 35.5 FPS at High or the 28.6 FPS at Ultra. The jump from Medium to High costs 15 FPS (a 30% reduction), which is a steep price for what are usually minor visual improvements in a game like Fivem. Meanwhile, the jump from Low to Medium only costs 8.7 FPS, but it brings substantial visual quality gains, particularly in texture detail and shadow resolution.
If the player prioritizes maximum smoothness over visuals, 1080p Low at 59.2 FPS is the best option. That frame rate is high enough to take advantage of a 60 Hz monitor and provides the most responsive input for competitive gameplay. However, the difference between 59.2 FPS and 50.5 FPS is small in real-world terms, and the visual downgrade from Medium to Low is significant. Therefore, Medium strikes the best balance between the two.
Ultra settings are not recommended. At 1080p Ultra, the combo only manages 28.6 FPS, which is below the 30 FPS playability floor and will feel stuttery and sluggish in a fast-paced multiplayer environment. At higher resolutions, even Low settings fail to produce playable frame rates (40.9 FPS at 1440p Low is borderline, but 22.8 FPS at 4K Low is not). Stick to 1080p for this build.
How This Combo Ranks — use comboRankInGame vs other tested combos
This combination of AMD Ryzen 5 4600G and NVIDIA GeForce GTX 1050 Ti ranks 1787th out of 1792 tested combos in Fivem. That puts it in the bottom 0.3% of all configurations in the database. This is an exceptionally poor ranking, and it reflects the GPU’s status as an end-of-life product that was entry-level even at its launch. The CPU is not the problem—the 4600G’s 75th percentile standing among all CPUs shows it is a capable mid-range part. The issue is that the GTX 1050 Ti, which sits in the 30th percentile among all GPUs and is on par with mobile parts like the GeForce 940M, simply cannot keep up with the demands of modern multiplayer rendering.
The deltaPct values for the GPU’s nearest rivals confirm that this is not a competitive part. The GTX 1050 Ti’s average benchmark score of 5316 is within 0.8% of the AMD Radeon R7 M445, a laptop GPU from a lower tier. In Fivem, the combo’s rank of 1787 out of 1792 means that virtually every other tested combination of CPU and GPU performs better. For context, the CPU’s nearest rivals (the Ryzen 3 PRO 5355GE and Core i5-12450H) would likely produce similar FPS if paired with a better GPU, but the 1050 Ti drags the entire system down.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
The measured FPS data provides a complete picture of this combo’s capabilities across three resolutions and four settings presets. At 1920x1080, the results are as follows: Low settings produce an average of 59.2 FPS, Medium produces 50.5 FPS, High produces 35.5 FPS, and Ultra produces 28.6 FPS. The spread from Low to Ultra is 30.6 FPS, showing that the GPU’s performance is highly sensitive to graphical load.
At 2560x1440, the frame rates drop significantly. Low settings yield 40.9 FPS, Medium yields 31.3 FPS, High yields 24.2 FPS, and Ultra yields 18.5 FPS. The gap between Low and Ultra narrows to 22.4 FPS, but the absolute numbers are all below the 60 FPS target and only Low and Medium approach playability.
At 3840x2160, the results are uniformly poor. Low settings average 22.8 FPS, Medium averages 18.0 FPS, High averages 12.6 FPS, and Ultra averages 13.8 FPS. Notably, the Ultra setting at 4K (13.8 FPS) is actually slightly higher than High (12.6 FPS), which is likely a measurement anomaly or a quirk of the specific scene, but it does not change the overall conclusion: this combo cannot handle 4K in Fivem. The data shows a consistent pattern where each resolution step up requires a corresponding drop in settings to maintain the same frame rate, and even then, the ceiling is low. For any serious gaming, 1080p with Medium or Low settings is the only viable configuration.
Hardware Specifications
AMD Ryzen 5 4600G
NVIDIA GeForce GTX 1050 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 4600G + NVIDIA GeForce GTX 1050 Ti in Fivem
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 22.8 |
| 3840x2160 | Medium | 18.0 |
| 3840x2160 | Ultra | 13.8 |
| 3840x2160 | High | 12.6 |
| 2560x1440 | Low | 40.9 |
| 2560x1440 | Medium | 31.3 |
| 2560x1440 | High | 24.2 |
| 2560x1440 | Ultra | 18.5 |
| 1920x1080 | Low | 59.2 |
| 1920x1080 | Medium | 50.5 |
| 1920x1080 | High | 35.5 |
| 1920x1080 | Ultra | 28.6 |
Fivem with Ryzen 5 4600G + Other GPUs
See how Fivem performs with the same CPU but different graphics cards.
Fivem with GTX 1050 Ti + Other CPUs
See how Fivem performs with the same GPU but different processors.
Other Games with Ryzen 5 4600G + GTX 1050 Ti
Explore FPS benchmarks for other games using this same hardware combination.