Evolve

The AMD Ryzen 5 5600 paired with the NVIDIA GeForce RTX 3050 4 GB delivers a playable but constrained experience in Evolve, a 2015 FPS title. Data shows the combination ranks 1539th out of 1695 tested combos, placing it in the lower tier of systems. The CPU, a 6-core/12-thread Zen 3 part, provides ample processing headroom, but the GPU’s limited 4 GB VRAM and modest bandwidth become the decisive factors as resolution and settings increase.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and reveals a GPU-bound scenario. At High settings, the average FPS falls from 66.5 at 1920x1080 to 46.4 at 2560x1440, a reduction of 30.2%. Pushing further to 3840x2160 yields just 25.8 FPS, a 61.2% decline from the 1080p figure. This pattern indicates the RTX 3050 4 GB is the limiting component; the Ryzen 5 5600’s single-thread and multi-thread scores (2584 in Cinebench R23 single-core, 18309 in multi-core) are far beyond what this title needs at these resolutions.

Low settings show a similar trend with higher absolute numbers: 113.1 FPS at 1080p drops to 78.3 FPS at 1440p, then to 43 FPS at 4K. The scaling from 1440p to 4K is particularly harsh, with a 45.1% performance hit, underscoring the pixel throughput limits of the 128-bit memory bus and 192.0 GB/s bandwidth. The gap between Low and Ultra at 4K is also telling: 43 FPS versus 20.2 FPS, a 52.9% difference. This wide spread suggests that the GPU’s shading units (2048) and texture units (64) are overwhelmed by higher detail levels, while the CPU remains idle.

At 1080p, the scaling is more moderate. Ultra settings produce 47.9 FPS compared to 113.1 on Low, a 57.7% reduction. This indicates that even at the lowest resolution, the graphics card’s 4 GB VRAM and 7.127 TFLOPS FP32 throughput are the primary bottlenecks. The CPU’s 32 MB shared L3 cache and 51.2 GB/s memory bandwidth are sufficient for frame pacing, but they cannot compensate for the GPU’s rasterization ceiling.

FAQ

*Q: Is this combo suitable for 4K gaming in Evolve?*

A: No. At 3840x2160, even Low settings only achieve 43 FPS, while High drops to 25.8 FPS and Ultra falls to 20.2 FPS. These numbers are below smooth playability thresholds.

Q: What is the best resolution for this combination?

A: The data indicates 1920x1080 is the sweet spot. High settings deliver 66.5 FPS, and Low reaches 113.1 FPS, both comfortably playable. At 2560x1440, only Low settings (78.3 FPS) remain fluid.

Q: How does the CPU affect performance in this game?

A: The Ryzen 5 5600 is not the limiting factor. Its Cinebench R23 multi-core score of 18309 and single-core score of 2584 are strong. The frame rate drops correlate entirely with resolution and settings, pointing to the GPU as the bottleneck.

Q: Does the RTX 3050's 4 GB VRAM matter here?

A: Yes. The 4 GB GDDR6 memory is a significant constraint. At 4K, the frame rate plummets to 20.2 FPS on Ultra, likely due to memory capacity and bandwidth limits (192.0 GB/s) rather than compute power alone.

Q: What settings should be used for a balance of quality and performance?

A: At 1080p, Medium settings yield 86.8 FPS, offering a good compromise. For higher fidelity, High at 1080p still provides 66.5 FPS. Avoid Ultra at 1440p (32.5 FPS) and 4K (20.2 FPS).

Q: How does this combo rank compared to other tested systems?

A: It ranks 1539th out of 1695 combinations, placing it in the bottom 9% of tested hardware. This reflects the GPU’s entry-level positioning rather than the CPU’s capability.

GPU Role

The NVIDIA GeForce RTX 3050 4 GB is the decisive component in Evolve. Its GA107 chip, built on Samsung’s 8 nm process, contains 8,700 million transistors and offers 7.127 TFLOPS of FP32 performance. The base clock of 1545 MHz boosts to 1740 MHz, but the memory subsystem is the weak point: 4 GB of GDDR6 on a 128-bit bus provides only 192.0 GB/s bandwidth. This is insufficient for high-resolution textures and effects, as evidenced by the steep FPS degradation at 4K.

The GPU’s 16 RT cores and 64 tensor cores are irrelevant for this title, as Evolve does not utilize ray tracing or DLSS. Instead, the 2048 shading units and 64 texture mapping units handle the workload. The pixel rate of 55.68 GPixel/s and texture rate of 111.4 GTexel/s are modest, explaining why Ultra settings at 2560x1440 (32.5 FPS) and 3840x2160 (20.2 FPS) fail to maintain playable frame rates. The 90 W TDP and 250 W suggested PSU indicate a low-power design, but this does not translate to high performance in this demanding scenario.

The GPU’s percentile ranking of 50 against all GPUs places it exactly at the median, yet its performance in Evolve is below average due to the VRAM limitation. At 1080p, the card can keep up with the CPU, but at higher resolutions, the memory bandwidth becomes a hard ceiling. The 12 Gbps effective memory speed is standard for the class, but the narrow bus width means data transfer is constrained. This is evident in the 45.1% FPS drop from 1440p to 4K on Low settings.

Measured FPS Breakdown

At 1920x1080, the combo delivers a wide range of results. Low settings produce an average of 113.1 FPS, which is smooth and responsive. Medium settings reduce this to 86.8 FPS, a 23.2% decrease, while High settings yield 66.5 FPS. Ultra settings drop significantly to 47.9 FPS, a 57.7% reduction from Low. The step from High to Ultra is harsh, indicating that the highest preset introduces effects that strain the 4 GB VRAM.

Moving to 2560x1440, the performance falls sharply. Low settings average 78.3 FPS, which remains playable. Medium settings drop to 57.2 FPS, and High settings fall to 46.4 FPS. Ultra settings are nearly unplayable at 32.5 FPS. The difference between Low and Ultra at this resolution is 58.5%, showing that the GPU’s compute resources are insufficient for full detail.

At 3840x2160, the results are mostly below acceptable thresholds. Low settings manage 43 FPS, which is borderline. Medium settings drop to 33 FPS, High settings to 25.8 FPS, and Ultra settings to 20.2 FPS. The scaling from 1080p to 4K on High settings (66.5 to 25.8 FPS) represents a 61.2% loss, confirming that the RTX 3050 4 GB is not designed for 4K gaming in this title. The data shows a consistent pattern: each resolution step up requires a substantial reduction in settings to maintain frame rates.

How This Combo Ranks

The combination of the AMD Ryzen 5 5600 and the NVIDIA GeForce RTX 3050 4 GB ranks 1539th out of 1695 tested combos in Evolve. This places it in the bottom 9.2% of all systems tested, a low position that is primarily attributable to the GPU. The CPU itself is competitive, with an average benchmark score of 21765 and a percentile rank of 79 against all CPUs. Its nearest rivals include the Intel Xeon D-1746TER (avgScore 21635, deltaPct 0.6) and the AMD EPYC 9554P (avgScore 21899, deltaPct -0.6), showing that the Ryzen 5 5600 is within 1% of these server-class processors in synthetic tests.

However, the GPU’s lack of benchmark scores and its percentile rank of 50 highlight its mid-tier status. The combo’s low rank in Evolve is not a reflection of the CPU’s capabilities but rather the GPU’s inability to handle the game’s demands at higher resolutions. The data shows that the Ryzen 5 5600 could easily support a more powerful graphics card, as evidenced by its high multi-threaded scores. The 1539th rank is a warning that this pairing is unbalanced for this specific title, where the GPU is the clear bottleneck.

In practical terms, the combo sits below average, meaning most other tested systems deliver higher frame rates. The 1695 tested combos include a wide range of hardware, and this pairing falls into the lower quartile. The CPU’s performance is wasted in this configuration, as the RTX 3050 4 GB cannot leverage the 6-core/12-thread processor’s full potential. For Evolve, the ranking suggests that users should consider a stronger GPU or lower resolution targets to achieve a better experience.