Downfall
This combination offers playable performance with an average of 39 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 14 | 22 | 27 | 33 |
| 1440p QHD | 22 | 35 | 43 | 53 |
| 1080p Full HD | 31 | 50 | 60 | 74 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Downfall with AMD Ryzen 7 9850X3D + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis
The pairing of AMD’s flagship 16-thread Ryzen 7 9850X3D with NVIDIA’s entry-level GeForce GTX 1050 Ti creates one of the most lopsided configurations in the Downfall benchmark database. The CPU ranks in the 92nd percentile among all processors, while the GPU sits in the 25th percentile. The measured frame rates reflect this extreme bottleneck, with the graphics card determining playability at nearly every setting and resolution.
Resolution Scaling
The data shows a steep and consistent performance penalty as resolution increases, which is a classic sign of a GPU-limited scenario. At 1080p with Low settings, the combo produces an average of 74 FPS. Moving to 1440p drops that average to 53 FPS, a 28% reduction. At 4K, the average falls further to 33 FPS, which is a 55% decrease from the 1080p result. This scaling pattern indicates that the GTX 1050 Ti is overwhelmed by the pixel count, and the powerful CPU is sitting idle waiting for the GPU to finish each frame.
The Medium preset tells a similar story. At 1080p, the average is 60 FPS; at 1440p, it drops to 43 FPS; and at 4K, it falls to 27 FPS. The 4K Medium result also shows a minimum of 23 FPS and a maximum of 31 FPS, meaning even the peaks are below the threshold for smooth gameplay. The High preset exhibits the same trend, starting at 50 FPS in 1080p, dropping to 35 FPS in 1440p, and settling at 22 FPS in 4K.
The Ultra preset is the most punishing. It achieves 31 FPS at 1080p, 22 FPS at 1440p, and only 14 FPS at 4K. The gap between 1080p and 4K is a 55% performance loss on Ultra, which is nearly identical to the loss seen on Low settings. This uniformity in scaling percentage across presets confirms that the limiting component is the GPU’s raw fill rate and memory bandwidth, not the CPU or the game’s engine logic.
Benchmark results indicate that the CPU’s capability is not the bottleneck here. If the processor were the constraint, the frame rates would not drop so dramatically when pixel count increases. Instead, the data shows a predictable inverse relationship between resolution and FPS, which is the signature of a GPU that has hit its compute ceiling. The 4K numbers are effectively unplayable across all settings, and even 1440p struggles to maintain 60 FPS on any preset.
CPU Role
The AMD Ryzen 7 9850X3D is a desktop processor based on the Zen 5 architecture, codenamed Granite Ridge, built on TSMC’s 4 nm process. It features 8 cores and 16 threads, with a base clock of 4.70 GHz and a boost clock of 5.60 GHz. The CPU has a 96 MB shared L3 cache and supports DDR5 memory on a dual-channel bus. In synthetic benchmarks, it scores 22,807 points in Cinebench R23 multi-core and 2,228 points in single-core, placing it in the 92nd percentile of all CPUs.
Given this level of processing power, the CPU role in Downfall is entirely secondary to the GPU. The game is not demanding on core count or thread count based on the measured results; the frame rates do not improve when the resolution is lowered, which would be expected if the CPU were struggling to feed the GPU. Instead, lowering the resolution from 1440p to 1080p yields a 40% or higher increase in FPS across all presets, proving that the CPU has ample headroom to handle the game’s logic and draw calls.
The CPU’s benchmark rivals include the Intel Xeon Platinum 8260M, which scores 58,323, and the Intel Core i9-14900, which scores 58,115. The Ryzen 7 9850X3D’s average benchmark score is 58,386, putting it 0.1% ahead of the Xeon and 0.5% ahead of the Core i9-14900. This places it in the top tier of processors, but that performance is untapped in this specific game due to the GPU constraint.
The 16 threads and high boost clock are irrelevant to the final frame rates in this configuration. The data shows that even at 1080p Low, where the CPU has the least work to do and the GPU has the least pixels to render, the system only achieves 74 FPS. A CPU-bound scenario would show a plateau in FPS regardless of resolution, but the measured results show no such plateau. The processor is essentially idling, waiting for the GTX 1050 Ti to output frames.
Settings Recommendations
Based on the measured FPS rows, the only playable combination is 1080p with Low settings, which yields an average of 74 FPS. This is the sole preset and resolution pair that breaks the 60 FPS barrier comfortably. The 1080p Medium preset averages 60 FPS exactly, with a minimum of 51 FPS, which is acceptable for slower-paced horror gameplay but may feel choppy during fast camera movements.
For a smoother experience, 1080p Low is the recommended setting. It provides a 23% higher average frame rate than Medium and a 48% higher average than High. The jump from Low to Medium costs 14 FPS, while the jump from Medium to High costs another 10 FPS. The Ultra preset at 1080p is a trap, dropping the average to 31 FPS, which is below the minimum of the Medium preset.
At 1440p, the best option is Low, which averages 53 FPS. This is playable but not ideal. Medium drops to 43 FPS, and High falls to 35 FPS. None of these reach the 60 FPS target, and the Ultra preset at 22 FPS is not recommended.
At 4K, all settings are below 33 FPS. Low averages 33 FPS, Medium averages 27 FPS, High averages 22 FPS, and Ultra averages 14 FPS. These are all too low for reliable gameplay. The data suggests that 4K is not a viable resolution for this GPU in Downfall.
The measured rows show a consistent pattern: Low settings are the only way to achieve acceptable performance, and even then, only at 1080p. The Medium preset at 1080p is a borderline case, but the minimum FPS of 51 suggests occasional stutters. For a horror game where frame pacing is critical to atmosphere, the extra headroom from Low settings is worth the visual trade-off.
How This Combo Ranks
This specific combination of the AMD Ryzen 7 9850X3D and the NVIDIA GeForce GTX 1050 Ti ranks 2,888th out of 2,928 tested combos in Downfall. This places it in the bottom 1.4% of all configurations, which is a direct result of the GPU’s low standing. The GTX 1050 Ti has an average benchmark score of 4,193 and sits in the 25th percentile of all GPUs, while the CPU is in the 92nd percentile.
The ranking indicates that the combo performs far worse than the sum of its parts. The processor is a top-tier part, but the GPU holds the entire system back. The data shows that this pairing is fundamentally unbalanced; the CPU contributes almost nothing to the gaming performance because the GPU cannot keep up. The rank of 2,888 out of 2,928 suggests that nearly every other combination tested, even those with much weaker CPUs, achieves better frame rates in Downfall because they are paired with more capable graphics cards.
The GPU’s nearest rivals in benchmark scores are the AMD Radeon R5 M330, which scores 4,170, and the NVIDIA Quadro K2100M, which scores 4,151. The GTX 1050 Ti is 0.6% faster than the R5 M330 and 1% faster than the Quadro K2100M. These are all entry-level or mobile parts, confirming the GPU’s position at the bottom of the desktop hierarchy. The combo rank reflects this: a high-end CPU cannot compensate for a GPU that is only marginally faster than integrated graphics solutions.
The 4K Ultra result of 14 FPS is particularly telling. This is the worst-case scenario, and the data shows that the GPU is simply not equipped for modern gaming at high resolutions. The combo rank in the 2,888th position out of 2,928 is a warning to anyone considering this pairing for Downfall or similar titles.
GPU Role
The NVIDIA GeForce GTX 1050 Ti is a Pascal architecture GPU, built on Samsung’s 14 nm process. It has 768 shading units, 48 texture mapping units, and 32 ROPs. The GPU operates at a base clock of 1291 MHz and a boost clock of 1392 MHz. It is equipped with 4 GB of GDDR5 memory on a 128-bit bus, providing a bandwidth of 112.1 GB/s. The card has a TDP of 75 W and uses no external power connectors, making it a low-power solution.
The GPU’s benchmark scores show its limitations. In Passmark G3D, it scores 6,340, and in 3DMark Steel Nomad DX12, it scores only 305. The Passmark DirectX 12 test yields a score of 26, which is exceptionally low and indicative of the card’s age. The GTX 1050 Ti is in the 25th percentile of all GPUs, which aligns with the measured frame rates in Downfall.
The GPU’s memory capacity and bandwidth are the primary constraints. The 4 GB frame buffer is insufficient for high-resolution textures, and the 112.1 GB/s bandwidth is a bottleneck at 1440p and 4K. The data shows that even at Low settings, the 4K resolution cannot break 33 FPS, which points to the memory system being overwhelmed by the pixel fill rate required at that resolution.
The GPU’s nearest rival is the AMD Radeon R5 M330, which is a mobile chip. The GTX 1050 Ti outperforms it by 0.6%, but this is a marginal victory. The GPU’s 25th percentile ranking means that 75% of all GPUs tested are faster. In Downfall, this translates to a hard ceiling on performance that the CPU cannot overcome. The boost clock of 1392 MHz is not enough to compensate for the limited shader count and memory bandwidth.
Measured FPS Breakdown
The measured FPS data provides a complete picture of the combo’s capability. At 1080p, the Low preset averages 74 FPS, the Medium preset averages 60 FPS with a minimum of 51 and a maximum of 69, the High preset averages 50 FPS, and the Ultra preset averages 31 FPS. The spread from Low to Ultra is 43 FPS, indicating that the GPU has very little headroom for visual enhancements.
At 1440p, the Low preset averages 53 FPS, the Medium preset averages 43 FPS with a minimum of 37 and a maximum of 50, the High preset averages 35 FPS, and the Ultra preset averages 22 FPS. The drop from 1080p to 1440p is severe across all settings, with the Low preset losing 21 FPS and the Ultra preset losing 9 FPS. The Medium preset’s minimum of 37 FPS shows that even the mid-range settings are prone to dips below 40 FPS.
At 4K, the Low preset averages 33 FPS, the Medium preset averages 27 FPS with a minimum of 23 and a maximum of 31, the High preset averages 22 FPS, and the Ultra preset averages 14 FPS. The 4K results are uniformly poor, with no setting achieving even 35 FPS. The Medium preset’s maximum of 31 FPS is lower than the 1080p Low preset’s average of 74 FPS, highlighting the GPU’s inability to handle the pixel count.
The full data set shows that the GTX 1050 Ti is only capable of delivering a smooth experience at 1080p Low. Every other combination of resolution and settings results in frame rates below 60 FPS. The CPU’s performance is irrelevant in this context; the measured FPS is entirely dictated by the GPU’s limitations. For users with this hardware, the only viable path to playable frame rates is to accept the lowest visual fidelity at 1080p.
Hardware Specifications
AMD Ryzen 7 9850X3D
NVIDIA GeForce GTX 1050 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 9850X3D + NVIDIA GeForce GTX 1050 Ti in Downfall
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 33.0 |
| 3840x2160 | Medium | 27.0 |
| 3840x2160 | High | 22.0 |
| 3840x2160 | Ultra | 14.0 |
| 2560x1440 | Low | 53.0 |
| 2560x1440 | Medium | 43.0 |
| 2560x1440 | High | 35.0 |
| 2560x1440 | Ultra | 22.0 |
| 1920x1080 | Low | 74.0 |
| 1920x1080 | Medium | 60.0 |
| 1920x1080 | High | 50.0 |
| 1920x1080 | Ultra | 31.0 |
Downfall with Ryzen 7 9850X3D + Other GPUs
See how Downfall performs with the same CPU but different graphics cards.
Downfall with GTX 1050 Ti + Other CPUs
See how Downfall performs with the same GPU but different processors.
Other Games with Ryzen 7 9850X3D + GTX 1050 Ti
Explore FPS benchmarks for other games using this same hardware combination.