Downfall

FAQ

Q: What is the overall performance tier of the AMD Ryzen 7 5800XT + NVIDIA GeForce GTX 1050 Ti combo in Downfall?

A: This combo ranks 1717 out of 1741 tested combinations, placing it in the bottom 2% of all tested systems for this game. The data shows a severely GPU-limited pairing where the GTX 1050 Ti's modest compute resources cap the experience.

Q: Can this system achieve 60 FPS at 1080p in Downfall?

A: Yes, but only at Low settings, where the average FPS reaches 73.5. The Medium preset delivers 61.0 FPS on average, while High drops to 51.4 FPS and Ultra falls to 28.5 FPS. The 60 FPS threshold is only reliably crossed at Low and Medium settings.

Q: How does the GTX 1050 Ti compare to its nearest GPU rivals?

A: The GTX 1050 Ti sits at the 30th percentile among all GPUs. Its average benchmark score of 5316 is essentially tied with the NVIDIA GeForce 930A (5317, 0.0% delta), 0.4% ahead of the GeForce 940M (5297), and 0.7% ahead of the AMD Radeon R7 240 (5280). The AMD Radeon R7 M445 is 0.8% faster at 5361.

Q: What is the strongest aspect of the Ryzen 7 5800XT in this pairing?

A: The CPU is vastly overqualified for this GPU. Its multi-threaded performance is exceptional, with a Cinebench R23 multi-core score of 23794 and an 86th percentile ranking among all CPUs. In a balanced system, this processor would not bottleneck any mainstream GPU, but the 1050 Ti cannot utilize its capabilities in Downfall.

Q: Is the GTX 1050 Ti's 4 GB VRAM sufficient for Downfall at 4K?

A: The data indicates severe frame rate degradation at 3840x2160. At Ultra settings, the average FPS collapses to 16.6, and even Low settings only reach 35.9 FPS. The 4 GB GDDR5 memory with 112.1 GB/s bandwidth is insufficient for smooth 4K gameplay in this title.

Q: What is the CPU's single-threaded performance relative to its multi-threaded score?

A: The Ryzen 7 5800XT posts a 3DMark single-thread score of 959 versus 7683 for 16 threads, and a Cinebench R23 single-core score of 3359 versus 23794 multi-core. This 8-core, 16-thread Zen 3 processor with a 4.80 GHz boost clock excels in threaded workloads, but Downfall's GPU bottleneck means this advantage rarely matters.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is the decisive performance limiter in this configuration. With 768 shading units, 48 texture mapping units, and 32 ROPs, the Pascal-based GP107 chip delivers a peak FP32 throughput of 2.138 TFLOPS. The 14 nm process and 3,300 million transistors are now dated, and the GPU's 30th percentile ranking among all GPUs confirms its position as an entry-level part.

The 4 GB GDDR5 memory operates at 1752 MHz (7 Gbps effective) across a 128-bit bus, yielding 112.1 GB/s of bandwidth. In Downfall, a horror title from 2016, this memory configuration proves workable at 1080p but collapses at higher resolutions. The pixel rate of 44.54 GPixel/s and texture rate of 66.82 GTexel/s are modest figures that directly explain the frame rate drops observed at 1440p and 4K.

The GPU's boost clock of 1392 MHz is fixed and cannot compensate for the architectural limitations. Benchmark data shows a PassMark G3D score of 6340 and a Geekbench OpenCL score of 20638, placing it near the GeForce 930A and 940M. The 1050 Ti's DirectX 12 score of 26 in PassMark is notably weak, though Downfall's API requirements are met through DirectX 12 (12_1) support.

Settings Recommendations

For a playable experience at 1920x1080, the Medium preset is the optimal choice. It delivers an average of 61.0 FPS, which crosses the 60 FPS threshold while maintaining better visual fidelity than Low. The Low preset at 73.5 FPS offers a smoother experience but sacrifices too much visual quality for the marginal gain.

At 2560x1440, the Medium preset drops to 41.1 FPS, which is borderline playable but noticeably less smooth. The Low preset at 52.0 FPS is the recommended setting for 1440p if responsiveness matters more than visuals. High settings at 35.6 FPS will feel stuttery during fast horror sequences.

For 3840x2160, no preset delivers an acceptable frame rate. Even Low settings only reach 35.9 FPS, and Medium falls to 25.8 FPS. The Ultra preset is effectively unplayable at 16.6 FPS. Users should avoid 4K entirely with this GPU in Downfall.

The data clearly shows diminishing returns as resolution increases. The jump from Low to Medium at 1080p costs 12.5 FPS, while the jump from Medium to High costs another 9.6 FPS. The Ultra preset's 28.5 FPS average is a 32.5 FPS drop from Low, making it unsuitable for any serious gameplay.

Measured FPS Breakdown

At 1920x1080, the GTX 1050 Ti achieves its best results. The Low preset averages 73.5 FPS, which is the highest measured value across all configurations. Medium delivers 61.0 FPS, High reaches 51.4 FPS, and Ultra falls to 28.5 FPS. The progression shows a steady degradation of approximately 12 FPS per preset step from Low to High, then a steep 22.9 FPS collapse when moving to Ultra.

At 2560x1440, the performance curve shifts downward significantly. Low averages 52.0 FPS, Medium 41.1 FPS, High 35.6 FPS, and Ultra 22.6 FPS. The relative gap between Low and Ultra is 29.4 FPS, similar to the 1080p gap of 45.0 FPS but compressed due to overall lower performance.

At 3840x2160, the results are uniformly poor. Low averages 35.9 FPS, Medium 25.8 FPS, High 22.7 FPS, and Ultra 16.6 FPS. The 4K resolution increases pixel count by 4x over 1080p, and the GPU's limited fill rate and bandwidth cannot cope. The difference between Low and Ultra at 4K is only 19.3 FPS, indicating the GPU is saturated at all settings.

The minimum and maximum FPS values are not recorded in the data, so only average FPS can be analyzed. The measured averages across all 12 configurations show a consistent pattern: settings have a larger impact at 1080p than at 4K, where the resolution itself becomes the primary bottleneck.

How This Combo Ranks

The AMD Ryzen 7 5800XT + NVIDIA GeForce GTX 1050 Ti combination ranks 1717 out of 1741 tested combos in Downfall, placing it in the bottom 1.4%. This is an exceptionally low position, driven entirely by the GPU's limitations. The CPU is in the 86th percentile among all processors, while the GPU sits in the 30th percentile, a massive mismatch.

Among the 1741 tested combinations, most pair the 5800XT with far more capable GPUs. The 1050 Ti's nearest GPU rivals include the GeForce 930A (5317 avg score, 0.0% delta), GeForce 940M (5297, 0.4% slower), and Radeon R7 240 (5280, 0.7% slower). The Radeon R7 M445 is 0.8% faster at 5361. These are all low-end parts from previous generations, confirming the GPU's bottom-tier status.

For the CPU, the nearest rivals include the AMD Ryzen 7 PRO 5755GE (29740 avg score, 0.1% faster), Ryzen 7 6800HS (29856, 0.3% slower), Ryzen AI 7 PRO 360 (29682, 0.3% faster), and Ryzen 7 7840H (29868, 0.3% slower). The 5800XT's avg benchmark score of 29774 is competitive with these mobile and PRO variants, but this processing power is wasted when paired with a GPU that cannot keep up.

The rank of 1717 out of 1741 means this combo outperforms only 24 other tested systems in Downfall. The data indicates that the 1050 Ti is the primary cause, as its 4 GB VRAM and 2.138 TFLOPS compute are insufficient for a game that demands modern GPU capabilities at higher settings.

CPU Role

The AMD Ryzen 7 5800XT is a Zen 3 (Vermeer) processor built on TSMC's 7 nm process with 4,150 million transistors. It features 8 cores and 16 threads with a base clock of 3.80 GHz and a boost clock of 4.80 GHz. The 32 MB L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth provide ample data throughput for gaming workloads.

The CPU's benchmark results are strong across the board. Cinebench R23 multi-core scores 23794 and single-core 3359, while 3DMark 16-thread reaches 7683 and single-thread 959. The PassMark multi-thread score of 27988 and single-thread of 3538 further confirm its capability. These numbers place the 5800XT at the 86th percentile among all CPUs, meaning it outperforms 86% of tested processors.

In Downfall, however, this CPU's role is minimal. The game is GPU-bound at every resolution and setting tested. The measured FPS values are consistent with what the 1050 Ti alone can deliver, showing no evidence of CPU bottlenecking. The 5800XT's 105 W TDP and Socket AM4 compatibility make it a solid foundation for any system, but pairing it with a GTX 1050 Ti creates a severe imbalance.

The CPU's release date of 2024-07-30 post-dates the GPU by nearly eight years, with the 1050 Ti launching on 2016-10-24. This generational gap is reflected in the performance data: the CPU can handle any workload Downfall throws at it, but the GPU cannot render frames fast enough to benefit.

Resolution Scaling

The measured FPS data shows a clear pattern of degradation as resolution increases from 1920x1080 to 3840x2160. At Low settings, the average FPS drops from 73.5 at 1080p to 52.0 at 1440p (a 29.3% decrease) and then to 35.9 at 4K (a 31.0% decrease from 1440p). This consistent ~30% drop per resolution step indicates the GPU is the limiting factor.

At Medium settings, the progression is 61.0 FPS at 1080p, 41.1 at 1440p, and 25.8 at 4K. The drop from 1080p to 1440p is 32.6%, and from 1440p to 4K is 37.2%. The increasing percentage drop at higher resolutions suggests the GPU's memory bandwidth and fill rate are being increasingly stressed.

High settings show 51.4 FPS at 1080p, 35.6 at 1440p, and 22.7 at 4K. The drops are 30.7% and 36.2% respectively. Ultra settings produce 28.5 FPS at 1080p, 22.6 at 1440p, and 16.6 at 4K, with drops of 20.7% and 26.5%. The smaller percentage drops at Ultra settings indicate the GPU is already saturated even at 1080p.

The resolution scaling analysis reveals that the GTX 1050 Ti is the bottleneck at all resolutions. If the CPU were limiting, we would expect FPS to remain relatively constant across resolutions, as the CPU workload per frame doesn't change with resolution. Instead, the consistent FPS drops with increasing pixel count confirm the GPU's 112.1 GB/s bandwidth and 44.54 GPixel/s pixel rate are insufficient for higher resolutions in Downfall.