Downfall
This combination provides smooth gameplay with an average of 113 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 43 | 65 | 77 | 95 |
| 1440p QHD | 65 | 105 | 129 | 154 |
| 1080p Full HD | 91 | 147 | 173 | 215 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Downfall with AMD Ryzen 5 7600X + NVIDIA GeForce GTX 1080 Ti, In-Depth Analysis
The data for Downfall with the AMD Ryzen 5 7600X and NVIDIA GeForce GTX 1080 Ti shows a system that is fundamentally balanced, but with a distinct shift in its bottleneck as resolution climbs. The measured FPS across the board indicates that this pairing is capable of delivering high frame rates at mainstream resolutions, while struggling to maintain playable performance at the absolute maximum settings of 4K. The analysis below breaks down the measured results to show how each component contributes to the overall experience.
Resolution Scaling
The frame rate drop from 1080p to 4K is steep and reveals a clear transition in which component is the primary limiter. At 1080p with Low settings, the combo produces 215.1 FPS, but at 4K Low, that figure falls to 94.9 FPS, a reduction of 56%. This dramatic scaling indicates that at 1080p, the CPU is doing the heavy lifting, allowing the GPU to stretch its legs and produce very high frame counts. When the resolution increases to 4K, the pixel workload multiplies, and the GTX 1080 Ti’s rendering capabilities become the definitive constraint, pulling the average down.
This pattern is consistent across all settings. Moving from 1080p High (147.3 FPS) to 4K High (65.2 FPS) results in a 55.7% performance drop, nearly identical to the Low setting scaling. The consistency suggests that the game’s engine scales resolution costs in a predictable linear fashion. At 1440p, the performance sits comfortably in between, with High settings yielding 105.1 FPS, which is 28.6% lower than the 1080p result and 38.0% higher than the 4K result. This positions 1440p as the sweet spot where the load is balanced enough to avoid the severe GPU bottleneck seen at 4K, while still providing a significant visual upgrade over 1080p.
The data strongly suggests that the limiting component is resolution-dependent. At 1080p, the Ryzen 5 7600X’s strong single-threaded performance, evidenced by its 3dmark_single_thread score of 1060, is sufficient to keep feeding the GPU, resulting in frame rates that exceed 200 FPS. However, as the resolution increases, the fixed cost of rendering each pixel on the GTX 1080 Ti becomes the dominant factor, and the CPU’s advantage is no longer relevant. The 4K Ultra result of 42.5 FPS is a clear indicator that this configuration is not suited for maximum fidelity at that resolution, as the GPU is simply overwhelmed by the combined load of high resolution and heavy graphical effects.
GPU Role
The NVIDIA GeForce GTX 1080 Ti is the older component here, using the Pascal architecture on a 16 nm process, and its role in Downfall is defined by its memory and clock speeds. With 11 GB of GDDR5X memory on a 352-bit bus, it provides a substantial 484.4 GB/s of bandwidth. This is likely sufficient to handle the texture data of a horror game like Downfall without causing a memory capacity bottleneck, even at 4K. The benchmark results support this, as the frame rates scale consistently with resolution, suggesting that it is raw compute power, not memory capacity, that is the limiting factor.
The GPU’s boost clock of 1582 MHz, combined with its 3584 shading units, gives it a raw FP32 performance of 11.34 TFLOPS. This is a respectable figure for a card of its generation, placing it in the 61st percentile of all GPUs. However, the data from Downfall shows that this horsepower is not enough to maintain high frame rates at 4K Ultra, where it only manages 42.5 FPS. The performance gap between 4K Medium (76.9 FPS) and 4K Ultra (42.5 FPS) is a 44.7% drop, highlighting how sensitive the card is to the game’s more demanding visual effects at higher presets. This indicates that the GTX 1080 Ti’s architectural limits are exposed when shader complexity and pixel count both increase.
The GPU’s average benchmark score of 19402 puts it in close competition with the NVIDIA TITAN Xp, which is a mere 1.1% ahead, and the older GTX 780, which is essentially tied at a 0% delta. This context is crucial; the GTX 1080 Ti is not a top-tier card by modern standards, but it remains a capable performer. In Downfall, this translates to a card that can easily handle 1080p and 1440p at high settings, but one that will require settings reductions at 4K to achieve a smooth experience. The low settings at 4K produce 94.9 FPS, which is playable, but the high preset at 4K drops to 65.2 FPS, indicating the card is nearing its limit.
CPU Role
The AMD Ryzen 5 7600X is a modern 6-core, 12-thread processor based on the Zen 4 architecture, and its role in Downfall is to provide the high single-thread performance necessary for high frame rates. The CPU’s boost clock of 5.30 GHz is a key asset, and its 3dmark_single_thread score of 1060 confirms its strength in this area. This is why the combo can achieve a 215.1 FPS average at 1080p Low; the CPU is not a bottleneck, allowing the GPU to work to its full potential. The CPU’s 32 MB of shared L3 cache also helps reduce memory latency, which can be beneficial in game engines that rely on rapid data access.
The CPU’s multi-threaded capabilities, while not as critical for this particular game, are still robust. Its cinebench_r23_multicore score of 24128 and 3dmark_max_threads score of 6845 indicate that it can handle background tasks and any future games that utilize more cores. However, in Downfall, the data suggests that the CPU’s influence wanes as resolution increases. The fact that the frame rate drops so significantly from 1080p to 4K, even at the same settings, reflects the GPU becoming the sole limiting factor at higher resolutions. The CPU is simply waiting for the GPU to finish rendering each frame.
The processor’s 83rd percentile ranking among all CPUs, with an average benchmark score of 26272, places it in a strong position. Its nearest rival, the AMD Ryzen 7 5700X, is just 0.2% ahead, showing that the 7600X is at the top of its class. This strength is what allows the combo to push frame rates past 150 FPS at 1440p, where the CPU is still able to keep the GPU fed. It is only at 4K, where the GPU’s pixel processing rate of 139.2 GPixel/s becomes the absolute ceiling, that the CPU’s performance becomes immaterial.
How This Combo Ranks
Within the benchmark database, this specific combination of the AMD Ryzen 5 7600X and NVIDIA GeForce GTX 1080 Ti ranks 1000th out of 1741 tested combos for Downfall. This places it in the middle of the pack, which is a fair representation of its overall capabilities. It is not a top-tier combination, but it is far from the bottom. The ranking reflects a system that is a mix of generations: a modern, high-end CPU paired with an older, but still competent, high-end GPU.
The ranking makes sense when considering the individual components. The CPU is a high performer, ranking in the 83rd percentile of all CPUs. The GPU, however, ranks in the 61st percentile of all GPUs. The combination of a very strong CPU and a mid-range GPU results in a system that is held back by its graphics card in most scenarios, particularly at higher resolutions. The 1000th rank out of 1741 combos suggests that while this pairing is functional and can provide a good experience in many games, it is not an optimal or high-end configuration. The data shows that the GPU is the more significant bottleneck, and the overall rank is dragged down by its limitations.
The fact that the GPU’s nearest rival is the NVIDIA TITAN Xp, which is only 1.1% faster, and the GTX 780, which is essentially equal, shows that the GTX 1080 Ti is a known quantity. It is a solid performer, but it is not a modern powerhouse. This is reflected in the combo’s mid-pack ranking. For a user with this hardware, the ranking indicates that they should not expect top-tier performance in Downfall at all settings, but rather a capable system that can be tuned to provide a smooth experience.
Settings Recommendations
Based on the measured FPS, the optimal settings for this combo depend heavily on the target resolution. For a 4K display, the data clearly shows that the Ultra preset is not viable, as the 42.5 FPS average falls below the threshold for smooth gameplay. The High preset at 65.2 FPS is playable, but the Medium preset at 76.9 FPS provides a better balance between visual quality and performance. However, the most sensible choice for 4K would be the Low preset, which yields 94.9 FPS and ensures a consistently fluid experience, given the GPU’s limitations. The jump from Medium to High at 4K costs 11.7 FPS, which is a significant loss for a modest visual gain.
At 1440p, the situation is far more comfortable. The Ultra preset at 65.3 FPS is playable, but the High preset at 105.1 FPS offers a substantial performance improvement while still providing excellent visual fidelity. The Medium preset at 128.9 FPS is also a strong option for users who prefer higher frame rates over maximum detail. For most users, the High preset at 1440p is the recommended choice, as it provides a great balance of quality and speed, with the headroom to handle demanding scenes without dropping to noticeable lows.
For 1080p, the system is more than capable. The Ultra preset at 91.2 FPS is a solid choice, but the High preset at 147.3 FPS is even better for competitive play or for users with high refresh rate monitors. The Low preset at 215.1 FPS is available for those who prioritize maximum frame rates above all else. The data suggests that at 1080p, the CPU is strong enough to ensure the GPU is the only factor, allowing for very high performance. The High preset is the sweet spot here, offering a massive performance boost over Ultra with only a minor reduction in visual quality.
Measured FPS Breakdown
The following is the complete set of measured average frame rates for Downfall with the AMD Ryzen 5 7600X and NVIDIA GeForce GTX 1080 Ti.
At 1920x1080, the system delivers 215.1 FPS on Low, 173.4 FPS on Medium, 147.3 FPS on High, and 91.2 FPS on Ultra. The scaling from Low to Ultra is a 57.6% performance drop, which is a significant cost for the highest settings.
At 2560x1440, the measured averages are 154.2 FPS on Low, 128.9 FPS on Medium, 105.1 FPS on High, and 65.3 FPS on Ultra. The step from High to Ultra is particularly steep, with a 37.9% performance loss, making High the most efficient setting at this resolution.
At 3840x2160, the averages are 94.9 FPS on Low, 76.9 FPS on Medium, 65.2 FPS on High, and 42.5 FPS on Ultra. The Ultra preset at 4K is the only configuration that falls below 60 FPS, confirming that this combination is not suited for maximum settings at this resolution. The difference between 1440p and 4K at High settings is a 38.0% drop, highlighting the GPU’s primary role in determining performance at higher resolutions.
Hardware Specifications
AMD Ryzen 5 7600X
NVIDIA GeForce GTX 1080 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7600X + NVIDIA GeForce GTX 1080 Ti in Downfall
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 94.9 |
| 3840x2160 | Medium | 76.9 |
| 3840x2160 | High | 65.2 |
| 3840x2160 | Ultra | 42.5 |
| 2560x1440 | Low | 154.2 |
| 2560x1440 | Medium | 128.9 |
| 2560x1440 | High | 105.1 |
| 2560x1440 | Ultra | 65.3 |
| 1920x1080 | Low | 215.1 |
| 1920x1080 | Medium | 173.4 |
| 1920x1080 | High | 147.3 |
| 1920x1080 | Ultra | 91.2 |
Downfall with Ryzen 5 7600X + Other GPUs
See how Downfall performs with the same CPU but different graphics cards.
Downfall with GTX 1080 Ti + Other CPUs
See how Downfall performs with the same GPU but different processors.
Other Games with Ryzen 5 7600X + GTX 1080 Ti
Explore FPS benchmarks for other games using this same hardware combination.