Downfall

The AMD Ryzen 5 5500 paired with the NVIDIA GeForce GTX 1050 Ti delivers a strictly 1080p experience in Downfall, and even then, only at lower settings. Benchmark data across four resolutions shows a system where the GPU is the overwhelming performance bottleneck, with the CPU’s capabilities largely left untapped. The combination ranks 1738 out of 1741 tested combos in this game, placing it in the bottom fraction of the database, a position dictated almost entirely by the graphics card’s age and limitations.

Resolution Scaling

The measured FPS data reveals a steep and consistent performance cliff as resolution increases. At 1920x1080 with Low settings, the combo achieves an average of 72.6 FPS. Dropping to 2560x1440 at the same Low preset reduces the average to 50.1 FPS, a 31% decrease. Moving to 3840x2160 at Low yields just 33.3 FPS, which is 54% below the 1080p figure. This scaling pattern is classic GPU-bound behavior; the frame rate is directly tied to the number of pixels the GTX 1050 Ti must render.

The situation becomes more severe at higher graphical presets. At High settings, the average frame rate falls from 49.4 FPS at 1080p to 33.4 FPS at 1440p and then to 21.9 FPS at 4K. The Ultra preset is the most punishing, starting at 30.1 FPS at 1080p, dropping to 19.8 FPS at 1440p, and collapsing to 14.9 FPS at 4K. The data indicates that even the 1440p resolution is too demanding for this hardware to maintain a smooth experience in Downfall. The 4K results are uniformly below 30 FPS across all settings, including Low, which confirms that the game is not playable at that resolution with this configuration.

The scaling from 1080p to 1440p shows a larger relative drop than from 1440p to 4K in some cases, suggesting that the GPU’s memory bandwidth and fill rate are being saturated early. For instance, at Medium settings, the drop from 1080p (63 FPS) to 1440p (40.6 FPS) is 35.6%, while the drop from 1440p to 4K (28.3 FPS) is 30.3%. This indicates that the 4 GB VRAM and 128-bit memory bus are immediate constraints, but the core compute limits are also reached quickly as pixel count grows. The 4K Ultra result of 14.9 FPS is the clearest evidence that this pairing is only suited for 1080p gaming, where it can provide playable frame rates at Low and Medium settings.

CPU Role

The AMD Ryzen 5 5500 is a 6-core, 12-thread processor based on the Zen 3 architecture. Its base clock is 3.60 GHz with a boost clock of 4.20 GHz. In synthetic benchmarks, the processor shows solid multi-threaded performance, scoring 16,429 in Cinebench R23 multi-core and 6,900 in Cinebench R20 multi-core. Its single-core performance is also respectable, with a Cinebench R23 single-core score of 2,319. The processor’s 16 MB of L3 cache and DDR4 memory support provide adequate bandwidth for feeding a discrete GPU.

However, in Downfall, the CPU’s role is secondary to the graphics card. The data shows that the frame rates are not limited by the processor. The 3DMark scores for the CPU, such as 5,386 for 16 threads and 836 for single-thread, indicate a capable part that does not bottleneck the GTX 1050 Ti. The measured FPS at 1080p Low (72.6 FPS) is a reasonable figure for a 2016 horror title, but it is far from the CPU’s potential ceiling. The processor’s percentile rank of 79 among all CPUs, while the GPU sits at the 30th percentile, further illustrates the mismatch.

The benchmark results strongly suggest that the Ryzen 5 5500 is not the limiting component in this combination. If the CPU were the bottleneck, we would expect to see less variation in FPS between different graphical settings at the same resolution. Instead, the data shows a clear and direct correlation between preset quality and frame rate, which is the hallmark of a GPU-limited scenario. The CPU’s 65 W TDP and active production status make it a modern, efficient part that is simply waiting for a more powerful GPU to unlock its full potential in gaming.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is the defining component of this combo, and its specifications explain the benchmark results. It features 4 GB of GDDR5 memory on a 128-bit bus, providing a bandwidth of 112.1 GB/s. The GPU has 768 shading units and a base clock of 1291 MHz with a boost clock of 1392 MHz. Its FP32 performance is 2.138 TFLOPS. These are modest figures for modern gaming, and they are reflected in its percentile rank of 30 among all GPUs.

The GPU’s memory configuration is particularly problematic for Downfall at higher resolutions. The 4 GB VRAM capacity is likely to be insufficient for 4K textures, but the data shows that the core compute is also a major hurdle. The average FPS at 1080p High is 49.4, which is playable but not smooth. At 1080p Ultra, the frame rate drops to 30.1 FPS, indicating that the GPU cannot handle the increased shading and texture work.

The GTX 1050 Ti’s performance relative to its direct rivals is telling. The nearestRivals data shows that it is comparable to mobile parts like the NVIDIA GeForce 940M and the AMD Radeon R7 M445, with deltaPct values of 0.4% and -0.8% respectively. This puts the desktop GPU in the same performance class as older mobile solutions, confirming its low standing. The 14 nm Pascal architecture, released in 2016, is showing its age. The GPU’s DirectX 12 score of 26 in Passmark is low, and its Vulkan score of 19,851 in Geekbench does not suggest any special capability in modern APIs. The data clearly shows that the GTX 1050 Ti is the bottleneck, and its limitations are the primary reason for the combo’s low ranking in this game.

FAQ

*Q: What is the best resolution and settings for this combo in Downfall?*

A: The data indicates that 1920x1080 is the only viable resolution. At Low settings, the average FPS is 72.6, and at Medium it is 63. Both are playable. High settings yield 49.4 FPS, which is acceptable, while Ultra drops to 30.1 FPS, which is below the threshold for smooth gameplay.

Q: How does the GPU compare to its nearest rivals?

A: The GTX 1050 Ti has an average benchmark score of 5,316. Its nearest rival, the NVIDIA GeForce 930A, scores 5,317, a delta of 0%. The AMD Radeon R7 240 scores 5,280, which is 0.7% lower. This shows that the GPU is statistically tied with these other low-end parts.

Q: Is the CPU or GPU the limiting factor in this game?

A: The GPU is the clear bottleneck. The CPU’s performance is far superior to the GPU, as evidenced by its 79th percentile rank compared to the GPU’s 30th. The FPS scales directly with graphical settings and resolution, which is a characteristic of GPU-bound performance.

Q: What is the combo’s rank among all tested configurations?

A: The combo ranks 1738 out of 1741 tested combos in Downfall. This places it in the bottom 0.2% of all tested systems, indicating that it is one of the weakest configurations for this game.

Q: What is the CPU’s multi-threaded performance like?

A: The Ryzen 5 5500 scores 16,429 in Cinebench R23 multi-core. In Passmark, it scores 19,330 for multithread and 65,001 for integer math. These scores show a capable 6-core, 12-thread processor that is not being fully utilized in this GPU-limited scenario.

Q: What is the average FPS at 1440p with Medium settings?

A: The average FPS at 2560x1440 with Medium settings is 40.6. This is lower than the 63 FPS achieved at 1080p with the same settings, showing a significant performance penalty when moving to a higher resolution.

How This Combo Ranks

The combination of the AMD Ryzen 5 5500 and the NVIDIA GeForce GTX 1050 Ti ranks 1738 out of 1741 combos tested in Downfall. This places it in the bottom 0.2% of all systems in the database, a result that is directly attributable to the GPU’s performance. The CPU’s strong showing in synthetic benchmarks, such as its Cinebench R23 multi-core score of 16,429, does not translate into high frame rates because the GPU cannot process frames fast enough.

The data shows that the processor is not the source of the problem. The Ryzen 5 5500 has an average benchmark score of 20,875, placing it in the 79th percentile of all CPUs. Its nearest rival, the Intel Core i5-12500, scores 20,897, a delta of -0.1%, showing that the AMD chip is competitive with modern mid-range processors. In contrast, the GTX 1050 Ti’s average benchmark score of 5,316 places it in the 30th percentile of all GPUs. Its nearest rival, the NVIDIA GeForce 930A, is a mobile part with a score of 5,317, a delta of 0%.

This extreme disparity between the CPU and GPU performance is the defining characteristic of this combo. The ranking of 1738 out of 1741 is a direct consequence of the GPU’s position in the 30th percentile. The 4K Ultra result of 14.9 FPS and the 1080p Ultra result of 30.1 FPS are both below the 60 FPS target for smooth gameplay, and even the 1080p Low result of 72.6 FPS is only just above it. The data suggests that this combo is only suitable for 1080p gaming at Low or Medium settings, and even then, the frame rates are not consistently high. This is one of the lowest-performing configurations in the database for Downfall, and the primary reason is the graphics card.