Doom
This combination provides smooth gameplay with an average of 116 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 46 | 56 | 66 | 76 |
| 1440p QHD | 84 | 103 | 122 | 140 |
| 1080p Full HD | 130 | 160 | 189 | 217 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Doom with AMD Ryzen 5 8400F + NVIDIA GeForce GTX 1080 Ti, In-Depth Analysis
The AMD Ryzen 5 8400F paired with the NVIDIA GeForce GTX 1080 Ti presents a classic high-refresh-rate 1080p setup that still holds its own at higher resolutions in Doom. The data shows a system where the GPU is the clear performance ceiling, but the CPU ensures that frame pacing remains consistent even when the graphics card is fully saturated.
Resolution Scaling
The FPS drop from 1080p to 4K is steep, indicating a GPU-bound scenario at every setting level. At High settings, the average frame rate falls from 160 FPS at 1920x1080 to 103 FPS at 2560x1440, a reduction of 57 FPS. Moving to 4K (3840x2160) at High settings drops the average further to 56 FPS, which is a 65% reduction from the 1080p figure. This scaling behavior is characteristic of a graphics card that is the primary bottleneck, as the Ryzen 5 8400F has ample headroom to feed the GTX 1080 Ti at lower resolutions.
The pattern holds across all quality presets. At Low settings, the average FPS at 1080p is 217, which falls to 140 at 1440p and then to 76 at 4K. The delta between 1440p and 4K remains significant, confirming that the GPU's rendering load is the dominant factor. Even at the lowest settings, the 4K result is less than half of the 1080p result, which shows that the pixel throughput demand of 4K overwhelms the Pascal architecture's capabilities regardless of the graphical complexity.
Interestingly, the gap between 1080p and 1440p is larger than the gap between 1440p and 4K in absolute terms for most presets. For example, at Medium settings, the drop from 1080p to 1440p is 67 FPS (from 189 to 122), while the drop from 1440p to 4K is 56 FPS (from 122 to 66). This suggests that while 4K is demanding, the GTX 1080 Ti experiences diminishing returns as it approaches its architectural limits, whereas the jump from 1080p to 1440p represents a more linear scaling of pixel count versus rendering capability.
The data indicates that 1440p is the practical ceiling for this combo if you demand 100+ FPS, while 4K is only viable for users who prioritize image quality over frame rate. The 1080p results, particularly at Low and Medium settings, exceed 180 FPS, which aligns with the expectations for a high-refresh-rate monitor. The limiting component is unambiguously the GPU, as the CPU's performance headroom is not exposed by any resolution or settings combination in the measured data.
FAQ
*Q: Can this combo run Doom at 4K smoothly?*
A: At 4K, the average FPS ranges from 46 on Ultra to 76 on Low settings. The Medium preset yields an average of 66 FPS with a minimum of 56. This is playable but not ideal for competitive play, as the Ultra preset drops below 60 FPS.
Q: What is the best resolution for maximizing frame rate?
A: At 1920x1080, the average FPS is 217 on Low, 189 on Medium, 160 on High, and 130 on Ultra. All presets at 1080p exceed 130 FPS, making this resolution the best choice for high-refresh-rate displays.
Q: How does the GTX 1080 Ti compare to its nearest rivals in this context?
A: The GPU's average benchmark score is 15548, which places it 1.7% ahead of the NVIDIA GeForce RTX 2060 and 1.7% ahead of the NVIDIA GeForce GTX 580. It sits 0.8% behind the AMD Radeon Pro W5500.
Q: Is the Ryzen 5 8400F a bottleneck for the GTX 1080 Ti?
A: The data suggests no. The CPU's average benchmark score is 25005, which is 0.2% ahead of the AMD Ryzen 5 7500F and 0.4% ahead of the Intel Core i7-13620H. The FPS scaling across resolutions is consistent with a GPU-limited scenario.
Q: What is the performance difference between Low and Ultra settings at 1440p?
A: At 2560x1440, Low settings produce an average of 140 FPS, while Ultra produces 84 FPS. This represents a 40% performance reduction for the highest quality preset, offering a significant visual upgrade at the cost of 56 FPS.
Q: Does the Medium preset offer a good balance?
A: The Medium preset provides an average of 122 FPS at 1440p and 189 FPS at 1080p. It also has the only recorded minimum FPS data for each resolution, showing a minimum of 104 FPS at 1440p and 161 FPS at 1080p, indicating stable frame delivery.
GPU Role
The NVIDIA GeForce GTX 1080 Ti is the defining component in this pairing. Its 11 GB of GDDR5X memory on a 352-bit bus provides 484.4 GB/s of bandwidth, which is substantial for a 2017-era card. In Doom, a game known for its fast-paced action and texture streaming, this memory subsystem is likely a key reason why the card maintains playable frame rates even at 4K. The measured FPS data shows that the GPU scales predictably with resolution, reinforcing its role as the primary performance driver.
The GPU's clock speeds are a mixed bag for modern standards. The base clock is 1481 MHz with a boost clock of 1582 MHz. While these are high for the Pascal architecture, they are far lower than what modern cards achieve. However, the architecture's raw throughput, measured at 11.34 TFLOPS for FP32, compensates for the lower clocks. The texture rate of 354.4 GTexel/s and pixel rate of 139.2 GPixel/s are still competitive for a game like Doom, which relies heavily on fill rate and texture bandwidth.
The 11 GB VRAM capacity is a crucial asset. At 4K Ultra settings, the GPU manages an average of 46 FPS, suggesting that memory capacity is not a limiting factor at this resolution. If the card had less VRAM, we would expect to see severe frame drops or texture pop-in, but the data shows a smooth, if low, frame rate. The memory clock of 1376 MHz (11 Gbps effective) is also sufficient, as the game's engine appears to be optimized for high-bandwidth memory access.
The GTX 1080 Ti's position in the benchmark hierarchy, with a percentile ranking of 58 among all GPUs, reflects its age but not its obsolescence. Its average benchmark score of 15548 places it in close competition with the AMD Radeon Pro W5500 (0.8% slower) and the NVIDIA GeForce RTX 2060 (1.7% faster). In Doom, this translates to a card that can handle 1440p with high settings comfortably, but struggles to maintain 60 FPS at 4K Ultra. The GPU is the bottleneck in this system, and the measured FPS data confirms that no CPU-side optimization can overcome the physical limits of the Pascal architecture at higher resolutions.
Measured FPS Breakdown
The measured FPS data provides a comprehensive view of this combo's performance across three resolutions and four settings presets. At 1920x1080, the system excels. Low settings produce an average of 217 FPS, which is the highest recorded value in the entire dataset. Medium settings yield 189 FPS with a minimum of 161 and a maximum of 217. High settings drop to 160 FPS, and Ultra settings still manage a respectable 130 FPS. These numbers indicate that 1080p is where this combo shines, offering competitive frame rates for esports and fast-paced single-player experiences.
At 2560x1440, the performance degrades but remains highly playable. Low settings deliver an average of 140 FPS, which is still above the threshold for high-refresh-rate monitors. Medium settings average 122 FPS with a minimum of 104 and a maximum of 141. High settings drop to 103 FPS, which is just above the 100 FPS mark. Ultra settings fall to 84 FPS, which is still smooth for most users but represents a 40% drop from Low settings. The minimum FPS data for Medium settings at 1440p (104 FPS) suggests that frame pacing remains consistent, with no severe dips.
At 3840x2160, the GPU's limitations become apparent. Low settings average 76 FPS, which is surprisingly playable for a 4K resolution on a Pascal card. Medium settings average 66 FPS with a minimum of 56 and a maximum of 76. High settings drop to 56 FPS, which is marginal for smooth gameplay. Ultra settings average 46 FPS, which is below the 60 FPS target and may cause noticeable judder. The data shows a clear performance hierarchy: Low > Medium > High > Ultra, with the delta between each preset being roughly 10 FPS at 4K.
Comparing the settings across resolutions, the data reveals that the gap between Low and Ultra widens as resolution increases. At 1080p, the difference between Low (217) and Ultra (130) is 87 FPS. At 1440p, the difference is 56 FPS. At 4K, the difference narrows to 30 FPS. This suggests that at higher resolutions, the GPU's pixel throughput becomes the absolute limit, and the graphical settings have less impact on the final frame rate. The Medium preset at 4K is the only setting that provides min/max FPS data, showing a 20 FPS range (56 to 76), which indicates relatively stable performance.
How This Combo Ranks
In the database of all tested CPU and GPU combinations, this pairing ranks 2084 out of 3712 combos for Doom. This places it in the 56th percentile of all tested systems, meaning it outperforms more than half of the configurations tested but lags behind a significant portion of modern hardware. This ranking is consistent with the hardware's age, as the GTX 1080 Ti is end-of-life, while the Ryzen 5 8400F is a newer budget-oriented CPU.
The combo's ranking is influenced more by the GPU than the CPU. The Ryzen 5 8400F's percentile rank among all CPUs is 77, which is above average. Its nearest rivals in synthetic benchmarks include the AMD Ryzen 5 7500F (0.2% slower) and the Intel Core i7-13620H (0.4% slower), indicating that the CPU is a solid performer. However, the GPU's percentile rank is 58, which drags the overall combo ranking down. The GTX 1080 Ti's nearest rival, the AMD Radeon R9 M380, is only 0.2% slower, while the RTX 2060 is 1.7% faster.
Given the data, this combo ranks where it does because the GPU is a mid-tier performer in the current landscape, while the CPU is above average. In Doom, a game that is well-optimized and not heavily CPU-dependent, the GPU's performance is the primary determinant of the combo's ranking. The 2084th position out of 3712 suggests that this is a competent mid-pack system, capable of delivering good frame rates at 1080p and 1440p, but not competitive with top-tier modern combos at 4K. The ranking reflects a balanced but aging GPU paired with a modern, capable CPU.
Settings Recommendations
For users with a 1080p display, the High preset is the best choice. It delivers an average of 160 FPS, which is well above the refresh rate of most standard monitors and competitive for 144Hz displays. The Medium preset offers 189 FPS, but the visual difference between Medium and High is often noticeable in texture quality and shadow detail. The Ultra preset at 130 FPS is also viable, but the 30 FPS drop from High may not justify the marginal visual improvements in a fast-paced game where motion blur masks fine details.
At 1440p, the Medium preset is the recommended sweet spot. It provides an average of 122 FPS with a minimum of 104, ensuring that frame drops are unlikely to dip below 100 FPS. The High preset at 103 FPS is also acceptable, but the Medium preset offers more headroom for demanding scenes. The Ultra preset at 84 FPS is playable but may feel less responsive for competitive play. The Low preset at 140 FPS is ideal for users who prioritize frame rate above all else, but the visual fidelity loss is significant.
At 4K, users face a trade-off. The Low preset at 76 FPS is the only setting that consistently exceeds 60 FPS, making it the best choice for smooth gameplay. The Medium preset at 66 FPS is also viable, with a minimum of 56 FPS that may occasionally dip below the 60 FPS threshold. The High preset at 56 FPS is borderline, while the Ultra preset at 46 FPS is not recommended for a satisfying experience. For 4K, the data suggests that Low or Medium settings are the only viable options for maintaining playable frame rates.
The overall recommendation is to use the Medium preset for a balanced experience at any resolution. It offers the only complete min/max FPS data in the measurements, indicating that the developers tested this setting most thoroughly. At 1080p, Medium yields 189 FPS with a minimum of 161, ensuring no stutter. At 1440p, Medium yields 122 FPS with a minimum of 104, providing a smooth experience. At 4K, Medium yields 66 FPS with a minimum of 56, which is acceptable for slower-paced play. Users who prioritize frame rate over visuals should drop to Low, while those who want the best image quality should raise to High or Ultra only at 1080p.
Hardware Specifications
AMD Ryzen 5 8400F
NVIDIA GeForce GTX 1080 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 8400F + NVIDIA GeForce GTX 1080 Ti in Doom
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 76.0 |
| 3840x2160 | Medium | 66.0 |
| 3840x2160 | High | 56.0 |
| 3840x2160 | Ultra | 46.0 |
| 2560x1440 | Low | 140.0 |
| 2560x1440 | Medium | 122.0 |
| 2560x1440 | High | 103.0 |
| 2560x1440 | Ultra | 84.0 |
| 1920x1080 | Low | 217.0 |
| 1920x1080 | Medium | 189.0 |
| 1920x1080 | High | 160.0 |
| 1920x1080 | Ultra | 130.0 |
Doom with Ryzen 5 8400F + Other GPUs
See how Doom performs with the same CPU but different graphics cards.
Doom with GTX 1080 Ti + Other CPUs
See how Doom performs with the same GPU but different processors.
Other Games with Ryzen 5 8400F + GTX 1080 Ti
Explore FPS benchmarks for other games using this same hardware combination.