Doom

Doom

AVERAGE FPS
81
good

This combination provides smooth gameplay with an average of 81 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 33 39 46 52
1440p QHD 57 74 87 97
1080p Full HD 93 110 133 149

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 52
3840x2160 Medium 46
3840x2160 High 39
3840x2160 Ultra 33
2560x1440 Low 97
2560x1440 Medium 87
2560x1440 High 74
2560x1440 Ultra 57
1920x1080 Low 149
1920x1080 Medium 133
1920x1080 High 110
1920x1080 Ultra 93

Doom with AMD Ryzen 5 5600 + NVIDIA GeForce GTX 1660 Ti, In-Depth Analysis

The AMD Ryzen 5 5600 and NVIDIA GeForce GTX 1660 Ti pairing delivers a fascinating case study in bottleneck behavior within Doom, a title that scales aggressively with both CPU and GPU resources. The measured FPS data reveals a system that is clearly GPU-limited at higher resolutions, yet surprisingly capable at 1080p, where the six-core processor’s strong single-thread performance keeps frame rates competitive. This analysis breaks down the exact performance envelope of this combo, interpreting what the numbers mean for gameplay.

Resolution Scaling

The data shows a predictable but steep performance drop as resolution increases, confirming that the GTX 1660 Ti is the primary limiting factor in this configuration. At 1080p with High settings, the combo produces 110.1 FPS. Moving to 1440p High reduces that figure to 74.2 FPS, a decline of approximately 33%. The jump to 4K High is far more punishing, with the average FPS collapsing from 74.2 to 38.8, representing a 48% loss from the 1440p result.

This scaling pattern is classic evidence of a GPU-bound scenario. The CPU has enough headroom at lower resolutions, but the 1660 Ti's 192-bit memory bus and 288.0 GB/s bandwidth struggle to feed the massive pixel count at 4K. The gap between Low and Ultra settings at 4K is particularly telling: Low nets 51.9 FPS, while Ultra drops to 33.4 FPS. That 18.5 FPS spread at 4K indicates that the GPU's raw shading power—5.437 TFLOPS FP32—is insufficient for maxed-out settings at that resolution. The data implies that 4K is only viable with reduced presets, while 1080p and 1440p offer much more headroom for visual fidelity.

GPU Role

The GTX 1660 Ti’s specifications explain the measured results. Its 6 GB of GDDR6 memory on a 192-bit bus provides 288.0 GB/s of bandwidth, which is adequate for 1080p and 1440p but becomes a constraint at 4K. The GPU’s boost clock of 1770 MHz and base clock of 1500 MHz drive its 1536 shading units. In Doom, the Ultra preset at 1080p yields 92.7 FPS, while the High preset at the same resolution reaches 110.1 FPS. This 17.4 FPS difference highlights how the GPU’s texture rate of 169.9 GTexel/s and pixel rate of 84.96 GPixel/s handle the increased shader complexity of Ultra.

Notably, the GPU’s percentile rank against all GPUs is 55th, placing it in the mid-range tier. Its average benchmark score of 13925 is nearly identical to the AMD Radeon RX 570X, which scores 13871 (a 0.4% difference). This means the 1660 Ti is operating exactly in its expected performance class. The 4K Ultra result of 33.4 FPS is below the 60 FPS threshold, yet the Low preset at 4K (51.9 FPS) shows the GPU can still function at higher resolutions when settings are reduced, likely due to lower memory pressure and fewer pixel shader operations.

How This Combo Ranks

The Ryzen 5 5600 + GTX 1660 Ti combination ranks 1436 out of 1681 tested combos in Doom. This places it in the lower 15% of all possible pairings, which aligns with the GPU’s mid-range positioning. The CPU itself is a strong performer—its average benchmark score of 21765 puts it in the 79th percentile of all CPUs, and it outperforms the Intel Xeon D-1746TER by 0.6% (21635 score) and the AMD EPYC 9554P by 0.6% (21899 score). However, the GPU’s 55th percentile ranking drags the overall combo down.

The rank of 1436 suggests that the CPU is significantly more capable than the GPU. This is a configuration where the processor is not the bottleneck. The data implies that pairing the Ryzen 5 5600 with a higher-tier GPU would yield much better Doom performance, as the CPU’s 6 cores and 12 threads are not the limiting factor. The 1660 Ti’s end-of-life production status also indicates that this is a legacy pairing, likely from a mid-range build circa 2019-2022, and the rank reflects the GPU’s age relative to newer cards.

Measured FPS Breakdown

A full sweep of resolutions and settings reveals the combo’s capabilities. At 1080p, the Low preset scores 149 FPS, Medium hits 132.5 FPS, High achieves 110.1 FPS, and Ultra drops to 92.7 FPS. All four settings exceed 60 FPS, making 1080p the sweet spot for this hardware. The 56.3 FPS spread between Low and Ultra at 1080p shows that the GPU has enough headroom to accommodate significant visual upgrades without falling below playable thresholds.

At 1440p, the results remain strong but tighten. Low reaches 97.2 FPS, Medium 86.9 FPS, High 74.2 FPS, and Ultra 57.1 FPS. The Ultra preset dips below 60 FPS, indicating that 1440p requires Medium or High settings for smooth gameplay. The 40.1 FPS spread from Low to Ultra at 1440p is narrower than at 1080p, suggesting the GPU is starting to hit its limits.

At 4K, the picture changes dramatically. Low scores 51.9 FPS, Medium 46.1 FPS, High 38.8 FPS, and Ultra 33.4 FPS. Only the Low preset approaches 60 FPS, and even that falls short. This resolution is essentially unplayable at high settings, and the 18.5 FPS spread between Low and Ultra indicates severe GPU constraint. The data shows a clear performance hierarchy: 1080p is fully playable at all settings, 1440p is playable at Medium and below, and 4K is only viable at Low.

CPU Role

The Ryzen 5 5600’s specifications are more than sufficient for Doom. Its 6 cores and 12 threads, based on the Zen 3 Vermeer architecture, provide robust multi-threaded performance. The CPU’s boost clock of 4.40 GHz and base clock of 3.50 GHz are critical for a game like Doom, which responds well to high single-thread performance. The Cinebench R23 single-core score of 2584 and multi-core score of 18309 demonstrate this strength.

The CPU’s 32 MB of shared L3 cache helps reduce memory latency, which is beneficial in fast-paced FPS titles. The 3DMark single-thread score of 882 is respectable, and the PassMark multi-thread score of 21541 indicates the CPU can handle complex game logic. However, the data suggests the CPU is not the bottleneck. At 1080p Low, the combo hits 149 FPS, but this is still below the CPU’s potential—the 3DMark max-thread score of 5659 implies the CPU could push higher frame rates with a more powerful GPU.

The CPU’s 65 W TDP and 7 nm process node also contribute to thermal headroom, allowing sustained boost clocks without throttling. The nearest rival comparison—the Intel Core i7-11700F is just 0.9% faster in average score—confirms the 5600 is a top-tier mid-range CPU. In Doom, the CPU’s role is to feed frames quickly enough, and the data shows it does so at all resolutions, with the GPU consistently being the limiting factor.

Settings Recommendations

Based on the measured rows, the optimal experience depends on the target resolution. For 1080p, the Ultra preset at 92.7 FPS is the best choice, as it provides the highest visual quality while still maintaining a frame rate well above 60 FPS. The High preset at 110.1 FPS offers a 17.4 FPS improvement over Ultra, but the visual difference is often marginal in Doom; for competitive play, High is preferable, but for visual fidelity, Ultra is viable.

For 1440p, the Medium preset at 86.9 FPS is recommended. It delivers a smooth experience above 60 FPS, while High at 74.2 FPS is also acceptable. The Ultra preset at 57.1 FPS falls below the 60 FPS threshold, so it is not ideal for fast-paced gameplay. The data suggests that 1440p Medium strikes the best balance between visual quality and performance.

For 4K, the Low preset at 51.9 FPS is the only viable option. While Medium at 46.1 FPS is playable, the 5.8 FPS gain from Medium to Low is significant for maintaining smoother motion. High and Ultra at 38.8 and 33.4 FPS, respectively, are too choppy for a fast FPS. The recommendation is to avoid 4K unless the player prioritizes resolution over frame rate, as even Low does not hit 60 FPS.

FAQ

*Q: Can this combo run Doom at 1440p with high settings?*

A: Yes, the High preset at 1440p achieves 74.2 FPS, which is above the 60 FPS threshold for smooth gameplay. The Ultra preset at 57.1 FPS is below 60 FPS, so High is the recommended setting for 1440p.

Q: Is the CPU or GPU the bottleneck at 1080p?

A: The GPU is the bottleneck. At 1080p Low, the combo hits 149 FPS, but the Ryzen 5 5600’s 3DMark max-thread score of 5659 suggests the CPU could handle higher frame rates. The GTX 1660 Ti’s 55th percentile ranking confirms it limits performance.

Q: What is the best preset for 4K gameplay?

A: The Low preset at 51.9 FPS is the best option for 4K. Medium drops to 46.1 FPS, and High and Ultra fall below 40 FPS, making them unsuitable for fast-paced FPS action.

Q: How does the GTX 1660 Ti compare to its nearest rival in benchmark scores?

A: The GTX 1660 Ti’s average benchmark score is 13925, which is 0.4% higher than the AMD Radeon RX 570X’s score of 13871. It also outperforms the NVIDIA GTX 680 by 0.8% and the RTX A2000 Mobile by 0.8%.

*Q: Does the CPU’s 6-core/12-thread configuration benefit Doom?*

A: Yes, the CPU’s 12 threads help with multi-threaded tasks, and its PassMark multi-thread score of 21541 indicates strong performance. However, the game is more GPU-limited, so the CPU’s advantages are only fully realized at lower resolutions.

Q: What is the frame rate difference between 1080p and 4K at High settings?

A: At 1080p High, the combo reaches 110.1 FPS, while at 4K High, it drops to 38.8 FPS. This represents a 71.3 FPS reduction, or roughly a 65% performance loss, when moving from 1080p to 4K.

Hardware Specifications

AMD Ryzen 5 5600

Cores / Threads 6 / 12
Base Clock 3500 MHz
Boost Clock 4400 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce GTX 1660 Ti

VRAM 6 GB GDDR6
Base Clock —
Boost Clock 1770 MHz MHz
TDP 120 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5600 + NVIDIA GeForce GTX 1660 Ti in Doom

Resolution Settings Avg FPS
3840x2160 Low 51.9
3840x2160 Medium 46.1
3840x2160 High 38.8
3840x2160 Ultra 33.4
2560x1440 Low 97.2
2560x1440 Medium 86.9
2560x1440 High 74.2
2560x1440 Ultra 57.1
1920x1080 Low 149.0
1920x1080 Medium 132.5
1920x1080 High 110.1
1920x1080 Ultra 92.7

Doom with Ryzen 5 5600 + Other GPUs

See how Doom performs with the same CPU but different graphics cards.

Doom with GTX 1660 Ti + Other CPUs

See how Doom performs with the same GPU but different processors.

Other Games with Ryzen 5 5600 + GTX 1660 Ti

Explore FPS benchmarks for other games using this same hardware combination.