Cyberpunk 2077

Cyberpunk 2077

AVERAGE FPS
26
limited

This combination may struggle with this title, averaging 26 FPS. Consider upgrading hardware or significantly lowering settings.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 13 13 18 24
1440p QHD 19 20 27 37
1080p Full HD 25 27 36 49

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 24
3840x2160 Medium 18
3840x2160 Ultra 13
3840x2160 High 13
2560x1440 Low 37
2560x1440 Medium 27
2560x1440 High 20
2560x1440 Ultra 19
1920x1080 Low 49
1920x1080 Medium 36
1920x1080 High 27
1920x1080 Ultra 25

Cyberpunk 2077 with AMD Ryzen 5 7400F + Intel Arc B390, In-Depth Analysis

# Cyberpunk 2077 with AMD Ryzen 5 7400F + Intel Arc B390

This combination of the AMD Ryzen 5 7400F and Intel Arc B390 produces a fundamentally GPU-limited experience in Cyberpunk 2077, with the measured frame rates across all resolutions and settings falling far below playable thresholds. The data reveals a system where the CPU's substantial multi-threaded capability is effectively neutralized by a graphics processor that ranks in the 9th percentile among all GPUs, creating a bottleneck that no settings adjustment can overcome.

Settings Recommendations

The measured data shows a consistent pattern: lower settings yield higher frame rates, but the absolute numbers remain low across the board. At 1080p, the Low preset delivers an average of 49 FPS, which is the only measured configuration that approaches a playable threshold. The Medium preset at 1080p drops to 36 FPS average, with a minimum of 31 FPS and maximum of 42 FPS, while High and Ultra settings at the same resolution produce 27 FPS and 25 FPS respectively.

Given these numbers, the Low preset at 1080p is the clear recommendation for any attempt at playability, as it is the only setting that maintains an average above 45 FPS. The gap between Low and Medium at 1080p is substantial—13 FPS—which suggests that the GPU's limited shading units (1536) and texture mapping units (48) are severely constrained when additional graphical features are enabled. The data indicates that even the modest step from Low to Medium incurs a 26.5% performance penalty, making the visual upgrade difficult to justify when the base performance is already marginal.

At 1440p, the Low preset produces 37 FPS average, which is playable only in the most forgiving sense—likely acceptable for turn-based or slower-paced sections but inadequate for the game's action sequences. At 4K, all settings produce averages below 25 FPS, with Low at 24 FPS being the only configuration that even approaches a slideshow-level consistency. The Medium preset at 4K has measured minimum and maximum values of 15 and 21 FPS, indicating significant frame time variance that would manifest as stutter.

For users who prioritize visual fidelity over frame rate, the High preset at 1080p offers 27 FPS average, but the data suggests this is a poor trade-off given that Ultra at the same resolution only costs 2 FPS more while providing the full visual feature set. However, none of these configurations deliver the 60 FPS target that Cyberpunk 2077's action-oriented gameplay demands. The practical recommendation is 1080p Low, with the understanding that even this setting requires substantial compromises in visual quality and responsiveness.

How This Combo Ranks

This CPU-GPU pairing ranks 2576 out of 2920 tested combinations in Cyberpunk 2077, placing it in the bottom 12% of all tested systems. This ranking reflects the GPU's severe limitation—the Intel Arc B390 sits in the 9th percentile among all GPUs, with a benchmark score of 1482 in 3DMark Steel Nomad DX12. The nearest GPU rivals are the NVIDIA GeForce GT 520MX (1463 score, 1.3% delta), GeForce 800M (1460, 1.5%), GT 625 OEM (1446, 2.5%), and GT 710 (1443, 2.7%). These are all legacy or entry-level mobile/desktop parts from over a decade ago, which contextualizes the B390's performance tier as being firmly in the "integrated graphics replacement" category.

The CPU, by contrast, is a strong performer. The AMD Ryzen 5 7400F achieves an average benchmark score of 32750, placing it in the 83rd percentile among all CPUs. Its nearest rivals include the Intel Core i5-14600T (32707, 0.1% delta), Intel Core Ultra 7 155H (32697, 0.2%), AMD Ryzen 7 PRO 6850H (32812, -0.2%), and AMD Ryzen AI 7 PRO 360 (32662, 0.3%). These deltas are negligible, indicating that the 7400F performs essentially identically to a range of mid-range and upper-mid-range processors from both AMD and Intel.

The stark contrast between CPU and GPU performance tiers explains the combo's low ranking. The data shows a system where the processor is capable of feeding a much more powerful graphics card, but the B390's output is the limiting factor. The combination's rank of 2576 out of 2920 suggests that many systems with weaker CPUs but stronger GPUs achieve better Cyberpunk 2077 performance, as this game is heavily dependent on GPU throughput for its rendering workload.

Resolution Scaling

The frame rate scaling from 1080p to 4K reveals a textbook GPU-bound scenario. At Low settings, the average FPS drops from 49 at 1080p to 37 at 1440p (a 24.5% decrease) and then to 24 at 4K (a 35.1% decrease from 1440p). The total drop from 1080p to 4K at Low settings is 51%, which is consistent with a GPU that is being progressively overwhelmed by pixel fill requirements.

At Medium settings, the scaling shows 36 FPS at 1080p, 27 FPS at 1440p (25% drop), and 18 FPS at 4K (33.3% drop from 1440p). The High preset yields 27 FPS at 1080p, 20 FPS at 1440p (25.9% drop), and 13 FPS at 4K (35% drop from 1440p). Ultra settings produce 25 FPS at 1080p, 19 FPS at 1440p (24% drop), and 13 FPS at 4K (31.6% drop from 1440p).

The consistency of these percentage drops across settings is telling. Regardless of whether the game runs at Low or Ultra, the resolution scaling penalty remains roughly 25% from 1080p to 1440p and another 33-35% from 1440p to 4K. This uniformity indicates that the limiting component is the GPU's raw rendering throughput—specifically its pixel rate of 60.00 GPixel/s and texture rate of 120.0 GTexel/s—rather than any specific feature or settings-dependent workload. The B390's 24 ROPs are simply insufficient to handle the pixel fill requirements of 4K in this game, regardless of how many graphical features are disabled.

The data also shows that the CPU is not a limiting factor at any resolution. If the CPU were the bottleneck, we would expect to see frame rates plateau or show smaller differences between 1080p and 1440p, as the resolution increase would not tax the processor further. Instead, the consistent percentage drops across all settings indicate that the GPU is saturated even at 1080p Low, which is the least demanding configuration measured.

Measured FPS Breakdown

The complete measured data set provides a comprehensive picture of this combination's performance envelope. At 1080p, the Low preset delivers an average of 49 FPS, which is the highest measured frame rate for this combo. Medium at 1080p averages 36 FPS with a minimum of 31 and maximum of 42. High at 1080p averages 27 FPS, and Ultra at 1080p averages 25 FPS. The spread from Low to Ultra at 1080p is 24 FPS, representing a 49% performance drop when enabling the highest settings.

At 1440p, the Low preset averages 37 FPS, Medium averages 27 FPS (min 23, max 31), High averages 20 FPS, and Ultra averages 19 FPS. The Low-to-Ultra spread at 1440p is 18 FPS, a 48.6% drop. At 4K, Low averages 24 FPS, Medium averages 18 FPS (min 15, max 21), High averages 13 FPS, and Ultra averages 13 FPS. The Low-to-Ultra spread at 4K is 11 FPS, a 45.8% drop.

These numbers reveal that the relative performance penalty for enabling Ultra over Low is nearly identical across all resolutions—approximately 46-49%. This consistency suggests that the settings-dependent workload scales uniformly with resolution, and the GPU's resource constraints manifest proportionally. The minimum frame times recorded for Medium settings (31 FPS at 1080p, 23 at 1440p, 15 at 4K) indicate that even the "playable" Low preset would likely experience frame time spikes during intense scenes, as the GPU's 7.680 TFLOPS FP32 throughput is stretched thin.

The measured data also shows a notable anomaly: High and Ultra settings at 4K produce identical 13 FPS averages. This suggests that at 4K, the GPU is so severely limited by pixel fill rate that the additional settings differences between High and Ultra become irrelevant—both are constrained by the same fundamental bottleneck. The same pattern appears at 1440p, where High (20 FPS) and Ultra (19 FPS) are nearly identical.

CPU Role

The AMD Ryzen 5 7400F is a 6-core, 12-thread processor based on the Zen 4 architecture (Raphael codename) manufactured on TSMC's 5 nm process. It operates with a base clock of 3.70 GHz and a boost clock of 4.70 GHz, with a 65 W TDP. The CPU features 64 KB of L1 cache per core, 1 MB of L2 per core, and 32 MB of shared L3 cache. Its memory support is DDR5 with dual-channel configuration and 83.2 GB/s bandwidth.

In synthetic benchmarks, the 7400F demonstrates strong multi-threaded performance: Cinebench R23 multi-core score of 21765, R20 multi-core of 9141, and R15 multi-core of 2193. Single-thread scores are also respectable: R23 single-core of 3072, R20 of 1290, and R15 of 309. PassMark results show 25645 in multi-thread, 3689 in single-thread, and 289999 in data compression. These figures place the CPU in the 83rd percentile, indicating robust general-purpose performance.

However, in Cyberpunk 2077, the CPU's role is largely theoretical. The measured frame rates are so low across all configurations that the CPU's 6 cores and 12 threads never approach saturation. The game's engine, which can utilize multiple threads for physics, AI, and streaming, would benefit from the 7400F's capabilities were the GPU not the limiting factor. The PassMark physics score of 1660 and floating-point math score of 45799 suggest adequate computational headroom for the game's simulation workloads.

The data implies that pairing this CPU with a significantly more powerful GPU would yield substantial performance improvements. The 7400F's nearest rival, the Intel Core i5-14600T, shows essentially identical average scores (0.1% delta), and its 83rd percentile ranking indicates that it is not the bottleneck in this configuration. The CPU's boost clock of 4.70 GHz provides sufficient single-thread performance for the game's main thread, while the 12 threads handle background tasks without strain.

FAQ

Q: Is this combination capable of running Cyberpunk 2077 at 60 FPS?

A: No. The highest measured average frame rate is 49 FPS at 1080p Low settings. No configuration in the measured data reaches 60 FPS.

Q: What is the best settings preset for this system?

A: The 1080p Low preset offers the highest average frame rate at 49 FPS. All other presets at any resolution produce averages below 40 FPS.

Q: How does the CPU's benchmark performance compare to its nearest rivals?

A: The Ryzen 5 7400F scores 32750 on average, which is 0.1% higher than the Intel Core i5-14600T (32707), 0.2% higher than the Intel Core Ultra 7 155H (32697), and 0.3% higher than the AMD Ryzen AI 7 PRO 360 (32662). It is 0.2% lower than the AMD Ryzen 7 PRO 6850H (32812).

Q: Is the GPU or CPU the bottleneck in this game?

A: The GPU is the clear bottleneck. The Intel Arc B390 ranks in the 9th percentile among all GPUs, while the CPU ranks in the 83rd percentile. Consistent frame rate drops across resolutions indicate GPU saturation.

Q: What is the frame rate difference between 1080p and 4K at Low settings?

A: The average frame rate drops from 49 FPS at 1080p to 24 FPS at 4K, a 51% decrease. This scaling is consistent with GPU pixel fill rate limitations.

Q: Does the Ultra preset provide any benefit over High at 4K?

A: No measurable benefit. Both High and Ultra at 4K produce identical 13 FPS averages, indicating the GPU is constrained by the same bottleneck regardless of settings.

GPU Role

The Intel Arc B390 is an integrated graphics processor based on the Xe3-LPG architecture (Panther Lake chip) manufactured on Intel's 3 nm process. It features 1536 shading units, 48 texture mapping units, and 24 ROPs, with 12 ray tracing cores. The GPU operates at a base clock of 300 MHz and a boost clock of 2500 MHz, delivering 7.680 TFLOPS FP32 performance and 15.36 TFLOPS FP16 (2:1 ratio). Its pixel rate is 60.00 GPixel/s and texture rate is 120.0 GTexel/s.

The B390's memory configuration is system shared, with bandwidth described as system dependent. This means the GPU relies on the CPU's DDR5 memory bandwidth of 83.2 GB/s, which is shared with the processor. This shared memory architecture likely contributes to the performance limitations observed, as the GPU must compete with the CPU for memory bandwidth, and the lack of dedicated VRAM means no dedicated high-bandwidth memory pool.

In 3DMark Steel Nomad DX12, the B390 scores 1482, placing it in the 9th percentile among all GPUs. Its nearest rivals are the NVIDIA GeForce GT 520MX (1463, 1.3% higher), GeForce 800M (1460, 1.5% higher), GT 625 OEM (1446, 2.5% higher), and GT 710 (1443, 2.7% higher). These comparisons illustrate the B390's performance class: it sits alongside GPUs that were considered entry-level over a decade ago.

In Cyberpunk 2077, the GPU's limitations are manifest across all resolution and settings combinations. The 24 ROPs are insufficient for the game's modern rendering techniques, and the 7.680 TFLOPS FP32 throughput is roughly one-tenth of what contemporary discrete GPUs offer. The ray tracing cores (12) are present but effectively useless at these performance levels, as enabling any ray-traced effects would likely reduce frame rates to single digits. The GPU's DirectX 12 Ultimate support (12_2) and Vulkan 1.4 compatibility are modern, but the hardware cannot leverage these APIs to produce playable frame rates in this demanding title.

The measured frame rates correlate directly with the GPU's pixel rate and texture rate. At 1080p Low, the 49 FPS average suggests the GPU is operating near its fill rate limits even at the lowest settings. The 60 GPixel/s pixel rate would theoretically support higher frame rates at lower resolutions, but the game's complex shader workloads and texture sampling requirements overwhelm the 48 TMUs and 1536 shading units. The data indicates that this GPU is suited for esports titles or older games, not for Cyberpunk 2077 at any reasonable quality level.

Hardware Specifications

AMD Ryzen 5 7400F

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 4700 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

Intel Arc B390

VRAM System Shared System Shared
Base Clock —
Boost Clock 2500 MHz MHz
TDP 80 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7400F + Intel Arc B390 in Cyberpunk 2077

Resolution Settings Avg FPS
3840x2160 Low 24.0
3840x2160 Medium 18.0
3840x2160 Ultra 13.0
3840x2160 High 13.0
2560x1440 Low 37.0
2560x1440 Medium 27.0
2560x1440 High 20.0
2560x1440 Ultra 19.0
1920x1080 Low 49.0
1920x1080 Medium 36.0
1920x1080 High 27.0
1920x1080 Ultra 25.0

Cyberpunk 2077 with Ryzen 5 7400F + Other GPUs

See how Cyberpunk 2077 performs with the same CPU but different graphics cards.

Cyberpunk 2077 with Arc B390 + Other CPUs

See how Cyberpunk 2077 performs with the same GPU but different processors.

Other Games with Ryzen 5 7400F + Arc B390

Explore FPS benchmarks for other games using this same hardware combination.