Cyberpunk 2077
This combination may struggle with this title, averaging 26 FPS. Consider upgrading hardware or significantly lowering settings.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 13 | 13 | 18 | 24 |
| 1440p QHD | 19 | 20 | 27 | 37 |
| 1080p Full HD | 25 | 27 | 36 | 49 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Cyberpunk 2077 with AMD Ryzen 5 5600F + Intel Arc B390, In-Depth Analysis
Cyberpunk 2077 remains one of the most demanding action RPGs in the benchmark database, and the combination of the AMD Ryzen 5 5600F with the Intel Arc B390 produces a specific set of performance characteristics that are heavily dictated by resolution. This analysis examines the measured frame rates across three resolutions and four quality presets, interpreting the data to identify the primary performance bottleneck and the practical limits of this configuration.
Resolution Scaling
The measured FPS data reveals a steep performance curve as resolution increases, indicating a system that is overwhelmingly constrained by the graphics processor. At 1920x1080 with Low settings, the combination achieves an average of 49 FPS. Moving to 2560x1440 at the same settings drops the average to 37 FPS, a reduction of 12 FPS or roughly 24%. Scaling further to 3840x2160 at Low settings yields just 24 FPS, representing another 13 FPS drop, or approximately 35% from the 1440p result. This pattern of diminishing returns at higher pixel counts is a classic signature of a GPU-bound scenario.
The data suggests that the Intel Arc B390, with its 7.680 TFLOPS of FP32 compute and 60.00 GPixel/s pixel rate, is the limiting component in this pairing. The Ryzen 5 5600F, with 6 cores and 12 threads, does not appear to be the primary constraint, as the frame rate scales almost linearly with the number of pixels being rendered. For instance, at 1080p High, the average FPS is 27, which drops to 20 at 1440p High, and further to 13 at 4K High. This represents a reduction of approximately 26% from 1080p to 1440p, and another 35% from 1440p to 4K. The consistency of these percentage drops across different settings levels reinforces the conclusion that the GPU is saturated long before the CPU’s capabilities are fully utilized.
Further evidence of the GPU bottleneck is found in the scaling between Low and Ultra presets. At 1080p, the difference between Low (49 FPS) and Ultra (25 FPS) is 24 FPS, which is a substantial performance penalty of about 49%. At 4K, the same preset comparison shows only an 11 FPS difference (24 FPS Low versus 13 FPS Ultra), or roughly 54%. While the percentage drop is similar, the absolute frame rates at 4K are already so low that even the minimum settings struggle to maintain playability. This indicates that the GPU’s rendering capabilities are exhausted at 4K, and reducing graphical fidelity provides less absolute benefit than at lower resolutions where the GPU has more headroom.
The data also shows that the transition from Medium to High has a smaller impact than from Low to Medium. At 1440p, the average FPS drops from 27 on Medium to 20 on High, a 7 FPS decrease, while moving from Low to Medium only costs 10 FPS (37 to 27). This suggests that the higher-tier presets introduce effects that are disproportionately expensive for this particular GPU architecture, likely related to its 12 ray tracing cores and the demands of the Xe3-LPG architecture at higher workloads. The measured minimum FPS values, available only for Medium settings, show 31 FPS at 1080p, 23 FPS at 1440p, and 15 FPS at 4K, indicating that frame pacing becomes increasingly inconsistent as resolution rises.
FAQ
Q: What is the highest average frame rate achievable with this CPU and GPU combination in Cyberpunk 2077?
A: The highest measured average FPS is 49, achieved at 1920x1080 resolution with the Low settings preset. This is the only configuration in the measured data that approaches a playable 60 FPS target, though it still falls short of it.
Q: How does the performance at 1440p compare to 1080p on Medium settings?
A: At 1920x1080 with Medium settings, the average FPS is 36, with a minimum of 31 and maximum of 42. At 2560x1440 with the same Medium preset, the average drops to 27 FPS, with a minimum of 23 and maximum of 31. This represents a 9 FPS reduction in average performance, or a 25% decrease when moving from 1080p to 1440p.
Q: Is the AMD Ryzen 5 5600F or the Intel Arc B390 the limiting factor in this game?
A: The data indicates that the Intel Arc B390 is the primary bottleneck. The frame rate scales consistently with resolution changes, which is a characteristic of GPU-bound performance. The Ryzen 5 5600F, with a PassMark single-thread score of 2872 and a multithread score of 19236, has sufficient processing power to feed the GPU at these frame rates, as evidenced by the fact that even at 4K Low, the system manages 24 FPS, suggesting the CPU is not stalling the pipeline.
Q: What is the performance difference between the Low and Ultra presets at 4K?
A: At 3840x2160, the Low preset achieves an average of 24 FPS, while the Ultra preset achieves an average of 13 FPS. This is a difference of 11 FPS, or approximately 46% lower performance on Ultra compared to Low. Both results are well below the threshold for smooth gameplay, indicating that 4K is not a viable resolution for this configuration.
Q: How does this combo rank among all tested combinations in Cyberpunk 2077?
A: This specific configuration ranks 2576 out of 2920 tested combos in the database. This places it in the lower percentile of performance, consistent with the low average benchmark scores of the Intel Arc B390, which sits at the 9th percentile of all GPUs.
Q: Are there any settings where the minimum FPS is stable enough for consistent play?
A: The only settings with measured minimum FPS values are the Medium presets. At 1080p Medium, the minimum is 31 FPS, while at 1440p Medium it drops to 23 FPS. At 4K Medium, the minimum is 15 FPS. The data suggests that even the best case scenario at 1080p Medium has a wide gap between the minimum and maximum (31 to 42), indicating variable frame pacing.
How This Combo Ranks
In the database of tested combinations for Cyberpunk 2077, this pairing of the AMD Ryzen 5 5600F and Intel Arc B390 ranks 2576 out of 2920 combos. This places it in the bottom 12% of all tested systems, confirming that it is a low-performance configuration for this demanding title. The rank is heavily influenced by the GPU’s capabilities, as the Intel Arc B390 holds a 9th percentile ranking among all GPUs, with an average benchmark score of 1482 in 3DMark Steel Nomad DX12.
The CPU, by contrast, is a mid-range performer, sitting at the 85th percentile among all CPUs with an average benchmark score of 36945. Its nearest rivals, such as the Intel Core Ultra 5 225 and AMD Ryzen 5 5500X3D, have nearly identical average scores (36938 and 37018 respectively), with delta percentages within 0.2%. This indicates that the CPU is not the differentiator in this combo’s low rank; rather, it is the GPU that drags the overall performance down.
The GPU’s nearest rivals include the NVIDIA GeForce GT 520MX and GeForce 800M, which are significantly older and less capable parts. The Intel Arc B390’s benchmark score is only 1.3% higher than the GT 520MX, despite being a much more modern integrated processor. This suggests that while the Arc B390 has modern features like DirectX 12 Ultimate and Vulkan 1.4 support, its raw compute throughput is extremely limited, which is reflected in the low overall combo rank for Cyberpunk 2077.
Given that the combo rank is 2576 out of 2920, the measured FPS results align with expectations. The system is capable of running the game, but only at lower resolutions and settings presets. The rank serves as a clear indicator that users should not expect high-fidelity or high-resolution experiences with this hardware combination, as it is positioned far below the median performance level of all tested systems.
Settings Recommendations
Based on the measured FPS data, the optimal experience with this combo is achieved at 1920x1080 resolution with the Low settings preset. This configuration yields an average of 49 FPS, which is the highest measured average across all tested rows. While this does not reach the standard 60 FPS target, it is the only setting that provides a reasonably fluid experience for an action RPG that requires responsive gameplay.
At 1080p Medium, the average FPS drops to 36, with a minimum of 31 FPS. This is a more visually appealing preset, but the 13 FPS loss from Low to Medium is significant. The minimum FPS of 31 suggests that there may be noticeable stutters in dense scenes, which could detract from the experience. For players who prioritize visual quality over absolute smoothness, Medium at 1080p is the highest preset that maintains an average above 30 FPS.
The High and Ultra presets at 1080p produce averages of 27 and 25 FPS, respectively. These are below the playable threshold for most users and are not recommended, as the visual improvements do not justify the substantial performance cost. At 1440p, even the Low preset only achieves 37 FPS, and Medium drops to 27 FPS, making 1440p a poor choice for this hardware. The 4K resolution is effectively unplayable across all presets, with the highest average being 24 FPS on Low.
Therefore, the data strongly suggests that users should play at 1080p with the Low preset for the best balance of performance and playability. If a higher visual fidelity is desired, the Medium preset at 1080p is the only alternative that keeps the average frame rate above 30 FPS, accepting the risk of occasional frame drops to 31 FPS. All other configurations result in average frame rates that are too low for a satisfying gameplay experience.
Measured FPS Breakdown
The measured FPS data provides a comprehensive view of performance across twelve distinct configurations. At 1920x1080, the Low preset delivers the best result with an average of 49 FPS. The Medium preset follows with an average of 36 FPS, and it is the only resolution where minimum and maximum FPS values are recorded (31 and 42, respectively). The High preset drops to 27 FPS, and the Ultra preset is the slowest at 1080p with 25 FPS.
Moving to 2560x1440, the performance decreases across all presets. The Low preset achieves 37 FPS, which is a 12 FPS drop from 1080p. The Medium preset averages 27 FPS, with a minimum of 23 and maximum of 31 FPS. The High preset yields 20 FPS, and the Ultra preset produces 19 FPS. The gap between Low and Ultra at 1440p is 18 FPS, which is a larger absolute difference than at 1080p, where the gap is 24 FPS.
At 3840x2160, the performance is severely limited. The Low preset is the only one that breaks the 20 FPS barrier, achieving an average of 24 FPS. The Medium preset averages 18 FPS, with a minimum of 15 and maximum of 21 FPS. The High and Ultra presets both tie at an average of 13 FPS. This indicates that at 4K, the GPU is completely overwhelmed, and even the most aggressive settings reductions cannot bring the frame rate to a playable level.
The data shows a consistent pattern: for every resolution, the Low preset provides the highest average FPS, followed by Medium, High, and Ultra in descending order. The differences between presets are not uniform, however. At 1080p, the jump from Low to Medium costs 13 FPS, while from Medium to High costs 9 FPS, and from High to Ultra costs only 2 FPS. This suggests that the Ultra preset does not add a significant additional load over High for this specific GPU, likely due to other bottlenecks within the rendering pipeline.
CPU Role
The AMD Ryzen 5 5600F is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer. It has a base clock of 3.00 GHz and a boost clock of 4.00 GHz, with a 65 W TDP. In the context of Cyberpunk 2077, the CPU’s role is to handle game logic, physics calculations, and draw call submissions, while the GPU manages the actual rendering.
The PassMark benchmark scores for this CPU show a single-thread score of 2872 and a multithread score of 19236. These scores indicate that the 5600F is a capable mid-range processor, sitting at the 85th percentile of all CPUs. Its nearest rivals, including the Intel Core Ultra 5 225 and AMD Ryzen 5 5500X3D, have nearly identical average scores, with delta percentages of 0% and -0.2%, respectively. This places the 5600F firmly in the middle of the performance pack for modern CPUs.
In this specific game and combo, the CPU’s performance is not the limiting factor. The measured FPS values are consistently low across all resolutions, and the scaling patterns point to the GPU as the bottleneck. For example, at 1080p Low, the system achieves 49 FPS, which is a relatively low frame rate that a 6-core processor should be able to feed without issue. If the CPU were the constraint, we would expect to see similar frame rates across different resolutions, but the data shows a clear decrease as resolution increases, which is a GPU-bound characteristic.
The CPU’s 32 MB of shared L3 cache and dual-channel DDR4 memory support with a bandwidth of 51.2 GB/s are sufficient for this game’s requirements. The data suggests that the 5600F has ample headroom to process the game’s threads at the frame rates the Arc B390 can produce. Even at the lowest measured frame rate of 13 FPS at 4K, the CPU is likely idling, waiting for the GPU to complete its rendering tasks. Therefore, while the CPU is a solid mid-range component, its performance is effectively wasted in this pairing due to the GPU’s severe limitations.
GPU Role
The Intel Arc B390 is an integrated graphics processor based on the Xe3-LPG architecture, manufactured on a 3 nm process by Intel. It has a base clock of 300 MHz and a boost clock of 2500 MHz, with a TDP of 80 W. The GPU features 1536 shading units, 48 texture mapping units, and 24 raster output pipelines, along with 12 ray tracing cores.
The GPU’s memory is marked as System Shared, meaning it relies on the host system’s RAM rather than dedicated VRAM. This is a significant limitation for a demanding game like Cyberpunk 2077, as memory bandwidth is system-dependent and likely a source of performance bottlenecks. The GPU’s calculated pixel rate is 60.00 GPixel/s and texture rate is 120.0 GTexel/s, which are low figures that align with its 9th percentile ranking among all GPUs.
The benchmark data for the Arc B390 shows a 3DMark Steel Nomad DX12 score of 1482, which is nearly identical to the NVIDIA GeForce GT 520MX (1463) and GeForce 800M (1460). This places the Arc B390 in the company of very old, low-end discrete GPUs, despite its modern feature set including DirectX 12 Ultimate and Vulkan 1.4 support. The 7.680 TFLOPS of FP32 compute is simply insufficient for the rendering demands of Cyberpunk 2077 at higher resolutions.
The GPU’s role in this combo is the primary determinant of the measured FPS. The data shows that the GPU is saturated at all resolutions, with the highest average FPS being 49 at 1080p Low. The ray tracing cores, while present, do not appear to provide any meaningful benefit at these performance levels, as even the High preset (which likely enables some ray tracing effects) drops to 27 FPS at 1080p. The system shared memory architecture further compounds the issue, as the GPU must compete with the CPU for memory bandwidth, which is a likely contributor to the low minimum FPS values observed at Medium settings. Overall, the Arc B390 is the clear bottleneck in this configuration, and its limited compute and memory capabilities prevent any playable experience beyond the lowest settings at 1080p.
Hardware Specifications
AMD Ryzen 5 5600F
Intel Arc B390
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5600F + Intel Arc B390 in Cyberpunk 2077
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 24.0 |
| 3840x2160 | Medium | 18.0 |
| 3840x2160 | Ultra | 13.0 |
| 3840x2160 | High | 13.0 |
| 2560x1440 | Low | 37.0 |
| 2560x1440 | Medium | 27.0 |
| 2560x1440 | High | 20.0 |
| 2560x1440 | Ultra | 19.0 |
| 1920x1080 | Low | 49.0 |
| 1920x1080 | Medium | 36.0 |
| 1920x1080 | High | 27.0 |
| 1920x1080 | Ultra | 25.0 |
Cyberpunk 2077 with Ryzen 5 5600F + Other GPUs
See how Cyberpunk 2077 performs with the same CPU but different graphics cards.
Cyberpunk 2077 with Arc B390 + Other CPUs
See how Cyberpunk 2077 performs with the same GPU but different processors.
Other Games with Ryzen 5 5600F + Arc B390
Explore FPS benchmarks for other games using this same hardware combination.