Cyberpunk 2077
This combination may struggle with this title, averaging 23 FPS. Consider upgrading hardware or significantly lowering settings.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 11 | 12 | 16 | 22 |
| 1440p QHD | 17 | 18 | 24 | 33 |
| 1080p Full HD | 23 | 24 | 33 | 45 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Cyberpunk 2077 with AMD Ryzen 5 3600 + Intel Arc B370, In-Depth Analysis
The AMD Ryzen 5 3600 and Intel Arc B370 combination delivers a fundamentally constrained experience in Cyberpunk 2077, landing at rank 2685 out of 2920 tested combos. The data shows a pairing where the integrated-class GPU is the dominant bottleneck, limiting frame rates to sub-30 territory across most configurations, while the six-core CPU’s capabilities remain largely untapped.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 5 3600 is a 6-core, 12-thread processor based on the Zen 2 architecture, built on TSMC’s 7 nm process with a 65 W TDP. Its base clock of 3.60 GHz and boost clock of 4.20 GHz, combined with a 32 MB shared L3 cache, provide a solid foundation for gaming workloads. The processor’s benchmark results reinforce this: it scores 15045 in Cinebench R23 multicore, 2124 in single-core, and 17700 in PassMark multithread, placing it in the 71st percentile of all CPUs.
In Cyberpunk 2077, the CPU’s role is secondary to the GPU. The game’s heavy simulation and AI workloads do benefit from the Ryzen 5 3600’s 12 threads, and its 3dmark_16_threads score of 4605 indicates strong multi-threaded scaling. However, the measured FPS data shows that even at 1080p Low, where CPU load is typically highest relative to GPU, the system only reaches 45 FPS. This suggests the CPU is not the limiting factor; rather, the GPU is unable to feed frames fast enough to stress the processor.
The nearest rivals in CPU performance reinforce this interpretation. The Intel Core i5-11400 scores 17067, a delta of -0.2% from the Ryzen 5 3600’s 17035 average. Similarly, the Intel Core i7-1260P scores 17007, a +0.2% delta. These near-identical scores mean that swapping to a comparable CPU would produce negligible FPS changes in this game, as the bottleneck lies elsewhere. The CPU’s 3dmark_single_thread score of 696 and Cinebench R20 single-core of 892 are adequate for the game’s logic, but the data indicates that no amount of CPU headroom can compensate for the GPU’s output limitations.
GPU Role — VRAM, clocks, and how they relate to this game's results
The Intel Arc B370 is an integrated graphics solution based on the Xe3-LPG architecture, built on Intel’s 3 nm process with a 25 W TDP. It operates with system-shared memory, meaning its VRAM size, bus width, and bandwidth are system-dependent rather than fixed specifications. The GPU has a base clock of 300 MHz and a boost clock of 2400 MHz, with 1280 shading units, 40 texture mapping units, and 20 raster output pipelines.
The GPU’s performance profile is severely limited. It scores 1184 in 3dmark_steel_nomad_dx12, placing it in the 5th percentile of all GPUs. This is a stark contrast to the CPU’s 71st percentile standing. The nearest GPU rivals are all older discrete parts: the ATI Mobility Radeon HD 5570 scores 1186, the ATI Radeon HD 5770 scores 1190, and the AMD Radeon HD 7650M scores 1192. The Arc B370 is within 0.7% of these aging components, confirming its position as an entry-level solution.
In Cyberpunk 2077, the GPU’s 6.144 TFLOPS FP32 performance and 96.00 GTexel/s texture rate are insufficient for the game’s demanding rendering pipeline. The 10 ray tracing cores are present, but the raw compute power is too low to enable meaningful RT effects at playable frame rates. The system-shared memory architecture further compounds the issue, as bandwidth is dependent on the host system’s RAM configuration. The measured FPS data shows the GPU struggling even at the lowest settings, with 1080p Low producing 45 FPS and 4K Low dropping to 22 FPS.
How This Combo Ranks — use comboRankInGame vs other tested combos
The combination of the Ryzen 5 3600 and Arc B370 ranks 2685 out of 2920 tested combos in Cyberpunk 2077, placing it in the bottom 8% of all systems. This low rank is primarily attributable to the GPU’s 5th percentile performance, which drags the entire combo down despite the CPU’s respectable 71st percentile ranking.
The disparity between CPU and GPU capabilities creates a system where the processor is effectively wasted. The Ryzen 5 3600’s nearest rivals — the Core i5-11400 and Core i7-1260P — would likely achieve similar combo ranks when paired with the same Arc B370, since the GPU bottleneck is so severe. Conversely, pairing the Ryzen 5 3600 with a mid-range discrete GPU would dramatically improve the rank, as the CPU has demonstrated it can handle more demanding workloads through its Cinebench R23 multicore score of 15045.
The combo rank of 2685 suggests that this system is only suitable for the lowest graphical demands. At 1080p Low, the system achieves 45 FPS, which is marginally playable, but any increase in settings or resolution quickly pushes frame rates into unplayable territory. The data indicates that this combo is not a viable gaming platform for Cyberpunk 2077 beyond the absolute minimum settings, and even then, performance is marginal.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
The measured FPS data provides a comprehensive picture of the combo’s capabilities across three resolutions and four settings presets. At 1080p, the system achieves its best results: 45 FPS on Low, 33 FPS on Medium (with a min of 28 and max of 38), 24 FPS on High, and 23 FPS on Ultra. The progression from Low to Ultra shows a 48.9% drop in average FPS, from 45 to 23, indicating that the GPU struggles significantly as graphical fidelity increases.
Moving to 1440p, the performance declines further. Low settings produce 33 FPS, Medium drops to 24 FPS (min 21, max 28), High falls to 18 FPS, and Ultra bottoms out at 17 FPS. The gap between Low and Ultra is 48.5%, similar to 1080p, but the absolute numbers are lower across the board. The 1440p Low result of 33 FPS is equal to the 1080p Medium result, showing that the resolution increase has a similar impact to a settings increase.
At 4K, the system is largely unplayable. Low settings yield 22 FPS, Medium drops to 16 FPS (min 14, max 19), High falls to 12 FPS, and Ultra produces 11 FPS. The 4K Low result of 22 FPS is less than half of the 1080p Low result of 45 FPS, highlighting the GPU’s inability to handle the pixel count increase. The data shows a consistent pattern: each resolution step down from 1080p to 4K roughly halves the frame rate at equivalent settings.
The Medium preset is the only one with min/max data across all resolutions, providing insight into frame time consistency. At 4K Medium, the range from 14 to 19 FPS is tight, but at such low averages, any variation is noticeable. The 1080p Medium range of 28 to 38 FPS is more acceptable, though still below the 60 FPS target.
FAQ — 4-6 Q&A pairs answerable from FACT PACK data
Q: What is the best FPS this combo can achieve in Cyberpunk 2077?
A: The highest average FPS recorded is 45, achieved at 1920x1080 resolution with Low settings. This is the only configuration that reaches playable frame rates, and it still falls short of 60 FPS.
Q: How does the CPU compare to its nearest rivals in benchmark scores?
A: The Ryzen 5 3600 has an average benchmark score of 17035. The Intel Core i7-1260P scores 17007 (0.2% higher), while the Intel Core i5-11400 scores 17067 (0.2% higher). The AMD EPYC 7742 scores 16998 (0.2% lower). These differences are negligible, indicating the CPU is competitive with these parts.
Q: Is the GPU or CPU more responsible for the low frame rates?
A: The GPU is overwhelmingly the limiting factor. The Arc B370 scores 1184 in 3dmark_steel_nomad_dx12, placing in the 5th percentile of all GPUs, while the Ryzen 5 3600 sits in the 71st percentile of CPUs. The FPS data shows that even at 1080p Low, the system only reaches 45 FPS, which is more indicative of GPU limitations than CPU constraints.
Q: What is the performance difference between 1080p Low and 4K Low?
A: At 1080p Low, the system achieves 45 FPS. At 4K Low, it drops to 22 FPS, representing a 51.1% decrease. This substantial drop is due to the GPU’s limited pixel throughput and system-shared memory bandwidth.
Q: How does the Arc B370 compare to its nearest GPU rivals?
A: The Arc B370 scores 1184 in 3dmark_steel_nomad_dx12. The ATI Mobility Radeon HD 5570 scores 1186 (0.2% higher), the ATI Radeon HD 5770 scores 1190 (0.5% higher), and the AMD Radeon HD 7650M scores 1192 (0.7% higher). The AMD FirePro M2000 scores 1168 (1.4% lower). These results show the Arc B370 is essentially on par with decade-old discrete GPUs.
Q: Which settings preset provides the most consistent frame times?
A: The Medium preset is the only one with recorded min and max FPS values across all resolutions. At 1080p Medium, the range is 28 to 38 FPS (10 FPS variance). At 1440p Medium, it is 21 to 28 FPS (7 FPS variance). At 4K Medium, it is 14 to 19 FPS (5 FPS variance). The tighter range at higher resolutions is due to the GPU being fully saturated, which paradoxically results in more consistent, albeit lower, frame delivery.
Settings Recommendations — which preset gives the best experience per the measured rows
Based on the measured FPS data, the Low preset is the only viable option for playable performance, but it comes with significant trade-offs. At 1080p Low, the system achieves 45 FPS, which is the only configuration that approaches smooth gameplay. The Medium preset at 1080p drops to 33 FPS, which is playable for less demanding users but may feel stuttery in action-heavy scenes. The High and Ultra presets at 1080p, at 24 and 23 FPS respectively, are not recommended for any gameplay scenario.
At 1440p, the Low preset produces 33 FPS, which is identical to the 1080p Medium result. This suggests that users with 1440p displays should prioritize Low settings to maintain a similar experience to 1080p Medium. The 1440p Medium preset at 24 FPS is borderline, but the 1440p High (18 FPS) and Ultra (17 FPS) are unplayable.
The 4K resolution is not viable for this combo. The best 4K result is 22 FPS on Low, which is below the minimum threshold for interactive gameplay. The data shows that no settings combination at 4K yields acceptable performance, so users should avoid this resolution entirely.
The optimal configuration for this system is 1080p with Low settings, yielding 45 FPS. This provides the best balance of frame rate and visual fidelity, as the Low preset still renders the game world at a playable speed. The Medium preset at 1080p (33 FPS) could be considered by users who prioritize visual quality over smoothness, but the 12 FPS drop from Low is substantial.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The FPS scaling from 1080p to 4K reveals a consistent pattern that confirms the GPU as the primary bottleneck. At Low settings, the frame rate drops from 45 FPS at 1080p to 33 FPS at 1440p (a 26.7% decrease) and then to 22 FPS at 4K (a 33.3% decrease from 1440p). The total drop from 1080p to 4K is 51.1%, which is roughly proportional to the pixel count increase from 2.07 million to 8.29 million pixels.
At Medium settings, the scaling is similar: 33 FPS at 1080p, 24 FPS at 1440p (27.3% decrease), and 16 FPS at 4K (33.3% decrease). The High preset shows 24 FPS at 1080p, 18 FPS at 1440p (25% decrease), and 12 FPS at 4K (33.3% decrease). The Ultra preset follows the same pattern: 23 FPS at 1080p, 17 FPS at 1440p (26.1% decrease), and 11 FPS at 4K (35.3% decrease).
The consistent ~25-27% drop from 1080p to 1440p and ~33-35% drop from 1440p to 4K across all settings indicates that the GPU is compute-bound rather than memory-bound. If memory bandwidth were the limiting factor, the scaling would be more erratic across different settings. The system-shared memory architecture, with its system-dependent bandwidth, does not appear to be the primary constraint; instead, the GPU’s raw shading and texturing capabilities are insufficient.
The fact that the CPU’s performance remains constant while FPS scales inversely with pixel count is definitive proof that the Arc B370 is the limiting component. The Ryzen 5 3600’s Cinebench R23 multicore score of 15045 and PassMark multithread score of 17700 are more than adequate for this game, but the GPU’s 5th percentile ranking caps the entire system’s performance. Even at 1080p Low, where the CPU is most likely to be the bottleneck, the system only achieves 45 FPS, which is far below what the CPU is capable of supporting. The data clearly shows that upgrading the GPU would yield significant frame rate improvements, while upgrading the CPU would provide no measurable benefit in this game.
Hardware Specifications
AMD Ryzen 5 3600
Intel Arc B370
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 3600 + Intel Arc B370 in Cyberpunk 2077
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 22.0 |
| 3840x2160 | Medium | 16.0 |
| 3840x2160 | High | 12.0 |
| 3840x2160 | Ultra | 11.0 |
| 2560x1440 | Low | 33.0 |
| 2560x1440 | Medium | 24.0 |
| 2560x1440 | High | 18.0 |
| 2560x1440 | Ultra | 17.0 |
| 1920x1080 | Low | 45.0 |
| 1920x1080 | Medium | 33.0 |
| 1920x1080 | High | 24.0 |
| 1920x1080 | Ultra | 23.0 |
Cyberpunk 2077 with Ryzen 5 3600 + Other GPUs
See how Cyberpunk 2077 performs with the same CPU but different graphics cards.
Cyberpunk 2077 with Arc B370 + Other CPUs
See how Cyberpunk 2077 performs with the same GPU but different processors.
Other Games with Ryzen 5 3600 + Arc B370
Explore FPS benchmarks for other games using this same hardware combination.