Barony

The AMD Ryzen 7 9700F paired with the NVIDIA GeForce RTX 2060 delivers a performance profile in Barony that is heavily dictated by resolution. The data shows a clear transition from a CPU-bound scenario at 1080p to a GPU-bound one at 4K, with the frame rate scaling patterns revealing exactly where the bottleneck shifts. This analysis breaks down the measured results, contextualizes the hardware within its peer group, and provides actionable settings guidance based strictly on the gathered FPS data.

Resolution Scaling

The measured FPS data for this combo in Barony reveals a steep and consistent performance drop as resolution increases, indicating that the NVIDIA GeForce RTX 2060 becomes the limiting factor very quickly. At the High preset, the average frame rate falls from 167 FPS at 1920x1080 to 105 FPS at 2560x1440, a reduction of 62 FPS. Moving to 3840x2160, the average drops further to 55 FPS, which is a 112 FPS decline from the 1080p baseline. This scaling pattern is characteristic of a system where the GPU's rendering load outpaces the CPU's ability to feed it frames at lower resolutions.

The scaling behavior across different settings reinforces this conclusion. At the Low preset, the frame rate at 1920x1080 is exceptionally high at 261 FPS, but it falls to 165 FPS at 2560x1440 and then to 86 FPS at 3840x2160. The percentage drop from 1080p to 4K at Low settings is substantial, showing that even with reduced graphical demands, the GPU is still the primary constraint at higher pixel counts. Conversely, the Ryzen 7 9700F, with its 8 cores and 16 threads, appears more than capable of handling the game's logic at lower resolutions, as evidenced by the triple-digit frame rates at 1080p.

The most telling data point for identifying the bottleneck is the difference between the Low and Ultra presets at each resolution. At 1920x1080, the spread between Low (261 FPS) and Ultra (120 FPS) is 141 FPS, meaning the CPU can still push very high frame rates when the GPU is not heavily taxed. However, at 3840x2160, the spread narrows to 47 FPS (86 FPS on Low versus 39 FPS on Ultra). This compression of performance headroom at 4K indicates that the RTX 2060 is saturated by the pixel workload, preventing the CPU from demonstrating its full potential. The data suggests that users targeting 4K will be strictly limited by the GPU, while 1080p and 1440p users will see a more balanced workload.

GPU Role

The NVIDIA GeForce RTX 2060 plays a decisive role in Barony's performance, particularly regarding its 6 GB of GDDR6 memory and the clock speeds at which it operates. The GPU’s base clock is 1365 MHz with a boost clock of 1680 MHz, and its memory runs at 1750 MHz (14 Gbps effective) across a 192-bit bus, yielding a bandwidth of 336.0 GB/s. Benchmark results show the card sits in the 58th percentile of all GPUs, with an average score of 15290. Its nearest rivals in the database are the NVIDIA GeForce GTX 580 (deltaPct 0), the AMD Radeon 680M (deltaPct 0.1), and the NVIDIA GeForce RTX 3050 OEM (deltaPct 0.6), indicating this is a mid-range performer in the broader market.

In the context of Barony, the GPU's VRAM capacity appears sufficient for the game's demands, as the measured FPS does not show signs of catastrophic stuttering or texture thrashing even at 4K Ultra. The minimum FPS recorded at 3840x2160 Medium is 55 FPS, which aligns with the average, suggesting consistent frame delivery rather than VRAM-related dips. However, the 6 GB frame buffer is a limiting factor for future-proofing in more demanding titles, but for this specific roguelike, the data shows it handles the load without crashing performance metrics.

The RTX 2060's architecture, based on Turing with 1920 shading units and 48 ROPs, is clearly the component that dictates the upper bounds of performance at higher resolutions. The pixel rate of 80.64 GPixel/s and texture rate of 201.6 GTexel/s are modest by modern standards, aligning with its ranking. The measured FPS at 4K Ultra (39 FPS average) is barely playable, while the 4K High preset (55 FPS) is borderline. This indicates that the GPU's raw compute power, rated at 6.451 TFLOPS FP32, is the primary hurdle for high-fidelity 4K gameplay. The CPU, in contrast, is a high-end part with a 94th percentile ranking among all CPUs, meaning it is unlikely to be the source of any performance ceiling in this pairing.

How This Combo Ranks

The combination of the AMD Ryzen 7 9700F and NVIDIA GeForce RTX 2060 is ranked 2308 out of 2935 tested combos in Barony. This places the pairing in the lower-middle tier of the database, which is surprising given the strong individual performance of the CPU. The Ryzen 7 9700F is an exceptionally capable processor, with an average benchmark score of 69996 and a 94th percentile ranking. Its nearest rivals include the AMD Ryzen 9 7940HX (deltaPct 0.2), Intel Core i7-14700KF (deltaPct -0.2), and AMD Ryzen 9 7950X (deltaPct 0.7), all of which are high-end desktop or mobile parts. This suggests the CPU is overqualified for the GPU it is paired with, leaving significant performance on the table.

The GPU, however, drags the combo ranking down. The RTX 2060's average benchmark score of 15290 and 58th percentile ranking places it in the mid-range segment. Its rivals, such as the AMD Radeon RX 7600 (deltaPct 0.8), are close in raw score but often feature more modern architectures. In Barony, this imbalance is clear: the combo's rank is a reflection of the GPU's inability to fully utilize the CPU's potential at higher settings. The data suggests that the CPU is capable of driving frame rates well beyond what the GPU can render, especially at 1080p where the RTX 2060 becomes the bottleneck.

The implications of this rank are significant for users looking to upgrade. Since the CPU is ranked in the top 6% of all processors, it offers substantial headroom for a future GPU upgrade without needing a platform change. Conversely, the GPU is the weak link in this specific combo for Barony. The measured FPS at 4K Ultra (39 FPS) and even 1440p Ultra (76 FPS) are below the thresholds typically desired for smooth gameplay, confirming that the GPU is the component holding the system back from higher combo rankings. The data indicates that swapping the RTX 2060 for a stronger GPU would yield a disproportionately large improvement in this game.

Settings Recommendations

Based on the measured FPS rows, the optimal settings for this combo in Barony depend heavily on the target resolution and desired frame rate. For users with a 1920x1080 display, the High preset offers an excellent balance, delivering an average of 167 FPS. This is well above the refresh rate of most standard monitors and provides a smooth experience without sacrificing visual quality. For those seeking maximum fluidity on a high-refresh-rate display, the Low preset at 261 FPS is the best choice, though it comes at the cost of graphical fidelity.

At 2560x1440, the High preset remains the sweet spot, with an average of 105 FPS. This maintains a high level of detail while staying comfortably above the 60 FPS threshold. The Medium preset at 123 FPS is also viable for users who prefer a higher frame rate buffer, but the visual difference between Medium and High is often minimal in roguelike titles. The Ultra preset at 76 FPS is playable but dips below the ideal range for fast-paced action, so it is not recommended for competitive play.

For 3840x2160, the data reveals a challenging situation. The High preset averages 55 FPS, which is playable but not ideal. The Medium preset provides a slightly better average of 64 FPS, with a minimum of 55 FPS and a maximum of 74 FPS, making it the most consistent option for 4K. The Low preset at 86 FPS is the only setting that provides a truly smooth 4K experience, but it sacrifices significant visual quality. The Ultra preset at 39 FPS is not recommended, as it falls below the playable threshold for most users. Based on these measurements, the Medium preset is the best recommendation for 4K, as it offers the highest average FPS with acceptable visual compromises.

Measured FPS Breakdown

The complete measured FPS data for the Ryzen 7 9700F and RTX 2060 combo in Barony is as follows. At 1920x1080, the Low preset achieves an average of 261 FPS, the Medium preset averages 194 FPS with a minimum of 165 FPS and a maximum of 224 FPS, the High preset averages 167 FPS, and the Ultra preset averages 120 FPS. This shows a clear hierarchy where lower settings unlock massive frame rate headroom, indicating the GPU is the limiting factor even at this resolution.

At 2560x1440, the Low preset averages 165 FPS, the Medium preset averages 123 FPS with a minimum of 104 FPS and a maximum of 141 FPS, the High preset averages 105 FPS, and the Ultra preset averages 76 FPS. The data shows a consistent drop of roughly 40-60 FPS when moving from 1080p to 1440p across all settings, which is a significant reduction that underscores the GPU's workload increase.

At 3840x2160, the Low preset averages 86 FPS, the Medium preset averages 64 FPS with a minimum of 55 FPS and a maximum of 74 FPS, the High preset averages 55 FPS, and the Ultra preset averages 39 FPS. The difference between Low and Ultra at 4K is 47 FPS, which is the smallest spread among all resolutions, confirming that the GPU is fully saturated. The minimum FPS data is only available for the Medium preset at all resolutions, showing a consistent 10-20 FPS dip below the average, which is typical for scenes with high complexity. The lack of min/max data for other presets suggests they were either stable or not recorded, but the averages provide a reliable baseline for performance expectations.

FAQ

Q: What is the best resolution for this combo to achieve consistently high frame rates?

A: Based on the data, 1920x1080 is the best resolution, with the High preset delivering 167 FPS and even the Ultra preset reaching 120 FPS. This resolution avoids the severe GPU bottleneck seen at higher pixel counts.

Q: How does the Ryzen 7 9700F compare to its nearest rivals in CPU benchmarks?

A: The Ryzen 7 9700F has an average benchmark score of 69996, placing it 0.2% above the AMD Ryzen 9 7940HX, 0.2% below the Intel Core i7-14700KF, 0.7% above the AMD Ryzen 9 7950X, and 0.9% above the Intel Core i7-14700K.

Q: Is the RTX 2060's 6 GB VRAM sufficient for Barony at 4K?

A: The measured data shows no evidence of VRAM-related performance crashes at 3840x2160. The Medium preset at 4K maintains an average of 64 FPS with a minimum of 55 FPS, indicating the 6 GB frame buffer is adequate for this game's requirements.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the Low preset averages 165 FPS, while the Ultra preset averages 76 FPS. This represents an 89 FPS difference, showing that graphical settings have a massive impact on frame rate at this resolution.

Q: How does this combo rank against all other tested combinations in Barony?

A: This specific CPU and GPU pairing is ranked 2308 out of 2935 combos. The relatively low rank is primarily due to the GPU's mid-range performance, as the CPU is ranked in the 94th percentile of all processors.

Q: Which preset provides the most balanced experience at 4K?

A: The Medium preset at 3840x2160 offers the best balance, with an average of 64 FPS, a minimum of 55 FPS, and a maximum of 74 FPS. This provides smoother performance than High (55 FPS average) while maintaining better visuals than Low (86 FPS average).