Barony

The AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 5070 combination holds the 351st position out of 1,702 tested combos in Barony, placing it in the top 21% of all configurations evaluated. This is a strong showing for a roguelike title, where the data indicates that this pairing delivers frame rates that are predominantly limited by the graphics card rather than the processor. The combination’s percentile standing suggests that while it is not at the absolute top tier, it sits comfortably within the upper quartile of systems tested for this specific game, offering a level of performance that should handle the game’s demands with considerable headroom. The measured FPS figures across all resolutions and settings support this interpretation, showing a system that is capable of high refresh rate gameplay at 1080p and remains very playable even at 4K.

How This Combo Ranks

The combo’s rank of 351 out of 1,702 tested combinations places it in the 79th percentile of all configurations tested for Barony. This is a notable position, as it indicates the pairing outperforms a significant majority of other CPU-GPU combinations in this specific game. The data shows that the system is not bottlenecked by either component to a degree that would cause it to fall behind, and its position reflects a balance between the CPU’s multi-threaded capabilities and the GPU’s raw rendering power. When considering the CPU’s own percentile rank of 86 against all CPUs, it is clear that the processor is a high-performing part, and this is somewhat mirrored in the combo’s overall standing. However, the GPU’s percentile rank of 83 against all GPUs is slightly lower, suggesting that the graphics card is the more limiting factor in this pairing, a conclusion reinforced by the resolution scaling data. The result is a combo that lands in the upper echelon of tested systems, delivering performance that is well above the median for this game.

GPU Role

The NVIDIA GeForce RTX 5070 is built on the Blackwell 2.0 architecture and features a 12 GB GDDR7 memory pool on a 192-bit bus, providing a memory bandwidth of 672.0 GB/s. This memory configuration is a key factor in the card’s performance, particularly at higher resolutions where data throughput becomes critical. The GPU’s boost clock is rated at 2512 MHz, and it contains 6,144 shading units, 192 texture mapping units, and 80 render output units. The card’s FP32 compute throughput is rated at 30.87 TFLOPS. For Barony, a game that is not heavily dependent on the latest ray tracing features, these specifications translate into very high raw frame rates, as seen in the measured FPS data. The GPU’s average benchmark score of 41,687 places it at the 83rd percentile of all GPUs, and its nearest rivals include the NVIDIA GeForce RTX 3090, which it trails by a mere 0.6% in average score, and the AMD Radeon Pro 5300, which it leads by 0.2%. This indicates that the RTX 5070 is performing at a level that is competitive with much more expensive cards from the previous generation, and its 12 GB VRAM buffer is sufficient for this title’s demands, as evidenced by the consistent performance across all tested settings.

Resolution Scaling

The measured FPS data reveals a clear pattern of GPU-bound performance as resolution increases. At 1080p, the system produces exceptionally high frame rates, with the Low setting hitting 507.2 FPS and even Ultra reaching 231.4 FPS. These numbers are so high that they suggest the CPU is capable of feeding the GPU well beyond what is necessary for a smooth experience. Moving to 1440p, the frame rates remain very high, with Low at 322.5 FPS and Ultra at 143.7 FPS. The scaling from 1080p to 1440p shows a typical drop of roughly 36% to 38% across all settings, which is consistent with a GPU that is beginning to work harder. The transition to 4K shows the most significant impact, with Low dropping to 167.1 FPS and Ultra to 77.1 FPS. The drop from 1440p to 4K is more pronounced, ranging from a 48% reduction at Low to a 46% reduction at Ultra. This pattern strongly indicates that the RTX 5070 is the limiting component at 4K, as the frame rate scales almost inversely with the pixel count increase, whereas at 1080p, the CPU’s 8 cores and 16 threads are likely providing ample headroom, keeping the GPU from being fully saturated.

Measured FPS Breakdown

At 1920x1080, the combination delivers outstanding performance. The Low preset yields an average of 507.2 FPS, Medium produces 378.8 FPS, High reaches 322.7 FPS, and Ultra still maintains a very high 231.4 FPS. These figures demonstrate that the system is never constrained by the CPU at this resolution, as even the most demanding preset clears the 200 FPS mark by a wide margin. The gap between Low and Ultra is 275.8 FPS, which shows the GPU’s headroom is being progressively utilized as settings increase.

Moving to 2560x1440, the frame rates remain exceptionally strong. Low averages 322.5 FPS, Medium 240.3 FPS, High 204.5 FPS, and Ultra 143.7 FPS. The scaling here is consistent, with each step up in settings reducing the frame rate by roughly 15% to 20%. The system remains highly playable at all settings, and even Ultra produces frame rates that are well above standard 144Hz monitors’ refresh rates.

At 3840x2160, the GPU’s workload becomes the clear bottleneck. Low averages 167.1 FPS, Medium 122.7 FPS, High 107.3 FPS, and Ultra 77.1 FPS. While these numbers are still playable, the drop from 1440p is significant. The Low preset at 4K (167.1 FPS) is still higher than the Ultra preset at 1440p (143.7 FPS), illustrating that settings have a larger impact on performance than resolution alone. The data indicates that for 4K gaming, users will need to dial back settings if they wish to maintain very high refresh rates, but the card is fully capable of providing a smooth experience at High settings.

FAQ

Q: Is the AMD Ryzen 7 5800XT a strong performer for this game?

A: Yes, the CPU’s benchmark scores indicate it is a high-end part, with a Cinebench R23 multi-core score of 23,794 and a single-core score of 3,359. Its percentile rank of 86 against all CPUs confirms that it is more powerful than most processors on the market, which is reflected in the high frame rates seen at 1080p.

Q: How does the RTX 5070 compare to the RTX 3090 in terms of average benchmark score?

A: The RTX 5070 has an average benchmark score of 41,687, while the RTX 3090 has an average score of 41,441. The deltaPct is 0.6%, meaning the RTX 5070 is just 0.6% faster in this aggregate metric, showing they are essentially performance peers.

Q: What frame rate can I expect at 1440p with High settings?

A: The measured data shows an average of 204.5 FPS at 2560x1440 with High settings. This is a very high frame rate that will easily drive a 144Hz or 165Hz monitor.

Q: Is the system capable of 4K gaming?

A: Yes, the system can handle 4K, but with compromises. At 3840x2160, the Ultra preset averages 77.1 FPS, while the High preset averages 107.3 FPS. For a locked 60 FPS experience, the High or Medium settings are more than sufficient, and even Ultra is playable.

Q: Which component is the limiting factor at 1080p?

A: At 1080p, the data suggests the GPU is the limiting factor, but the CPU is not far behind. The frame rates are so high (over 500 FPS on Low) that they exceed the refresh rate of almost any monitor. The CPU’s 16 threads provide sufficient processing power, but the GPU’s rendering speed is what ultimately caps the maximum FPS.

Q: What is the difference in performance between the Low and Ultra presets at 1080p?

A: The average frame rate at 1080p Low is 507.2 FPS, while at Ultra it is 231.4 FPS. This represents a 275.8 FPS difference, or a 54% reduction in frame rate when moving from the lowest to the highest quality settings.

CPU Role

The AMD Ryzen 7 5800XT is an 8-core, 16-thread processor based on the Zen 3 architecture, with a base clock of 3.80 GHz and a boost clock of 4.80 GHz. It features a 32 MB L3 cache and supports DDR4 memory with a dual-channel interface, providing a memory bandwidth of 51.2 GB/s. The CPU’s benchmark results are strong, with a Cinebench R23 multi-core score of 23,794 and a single-core score of 3,359, placing it at the 86th percentile of all CPUs. In Barony, the CPU’s role is to feed the GPU with draw calls and game logic, and the data shows it performs this task admirably. At 1080p, the frame rates are so high that the CPU is likely nearing its limit, but the measured numbers indicate it never causes a significant bottleneck. The processor’s average benchmark score of 29,774 places it just 0.1% ahead of the AMD Ryzen 7 PRO 5755GE and 0.3% behind the AMD Ryzen 7 6800HS and Ryzen 7 7840H, showing it is very competitive with other high-end mobile and desktop parts. For a roguelike game like Barony, which may rely more on single-threaded performance for game logic, the 5800XT’s strong single-core showing ensures that the system remains fluid even when the GPU is not fully stressed. The CPU’s 105 W TDP and AM4 socket compatibility make it a practical choice for a build with this GPU, and its 16 threads provide ample headroom for any background tasks or future game updates that may utilize more cores. The data confirms that this CPU is not a weak link in the combination; rather, it provides the necessary foundation for the RTX 5070 to achieve its full potential.