Barony
This combination delivers exceptional performance with an average of 218 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 71 | 99 | 115 | 155 |
| 1440p QHD | 135 | 189 | 220 | 296 |
| 1080p Full HD | 214 | 299 | 348 | 469 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with AMD Ryzen 5 7600 + AMD Radeon RX 9070 XT, In-Depth Analysis
Resolution Scaling
The measured FPS data for Barony with the AMD Ryzen 5 7600 and AMD Radeon RX 9070 XT shows a clear and predictable pattern as resolution increases. At 1920x1080 with Low settings, the combo delivers 469 FPS average. Moving to 2560x1440 at the same Low preset, the average drops to 296 FPS, a reduction of 173 FPS. At 3840x2160 Low, the average falls further to 155 FPS. This scaling behavior—roughly a 37% drop from 1080p to 1440p and another 48% drop from 1440p to 4K at Low settings—indicates that the GPU is becoming the primary limiting factor as pixel count rises, though the CPU still has headroom at lower resolutions.
The Medium preset tells a similar story. At 1080p Medium, the average is 348 FPS. At 1440p Medium, it drops to 220 FPS. At 4K Medium, the average settles at 115 FPS. The gap between 1080p and 1440p Medium is 128 FPS, while the gap between 1440p and 4K Medium is 105 FPS. These deltas are relatively consistent, suggesting that the RX 9070 XT's rendering workload scales with pixel count in a linear fashion for this roguelike title, without unexpected bottlenecks emerging at any single resolution step.
High settings show a similar trend but with lower absolute numbers. The 1080p High average is 299 FPS, 1440p High delivers 189 FPS, and 4K High produces 99 FPS. The percentage drops are steep: 37% from 1080p to 1440p, and 48% from 1440p to 4K. This mirrors the Low preset scaling almost exactly, which implies that the relative cost of each resolution step is consistent regardless of the graphics preset chosen. The limiting component at 4K is clearly the GPU, as the CPU's performance headroom becomes less relevant when the GPU is pushing 8.3 million pixels.
Ultra settings produce the lowest frame rates across all resolutions. At 1080p Ultra, the average is 214 FPS. At 1440p Ultra, it drops to 135 FPS. At 4K Ultra, the average falls to 71 FPS. The scaling from 1080p to 1440p Ultra is a 79 FPS loss, and from 1440p to 4K Ultra, a 64 FPS loss. The 4K Ultra result of 71 FPS is the only measured configuration that falls below the 100 FPS threshold, indicating that the most demanding settings at maximum resolution push the GPU to its limits. The data suggests that at 1080p and 1440p, the CPU can keep feeding the GPU adequately, but at 4K, the GPU's rendering capacity becomes the dominant constraint, especially on Ultra.
Settings Recommendations
For players targeting high refresh rates at 1080p, the data shows that even Ultra settings are viable. The 1080p Ultra average of 214 FPS is well above typical 144Hz monitor refresh rates, and the 1080p High average of 299 FPS approaches 300 FPS territory. The 1080p Medium average of 348 FPS and Low average of 469 FPS are progressively higher, but the visual quality trade-off from Ultra to Medium may not be worth the frame rate gain for most users, given that even Ultra remains extremely smooth at this resolution.
At 1440p, the recommendation shifts slightly. Ultra delivers 135 FPS average, which is still excellent for most displays. High settings produce 189 FPS, offering a comfortable margin above 144Hz. Medium at 220 FPS and Low at 296 FPS are both exceptionally high. The measured minimum FPS at 1440p Medium is 187 FPS, which means even the worst-case frame times stay well above 144 FPS. For competitive play, High settings at 1440p provide a strong balance, while Ultra remains viable for visually oriented players who still want 135 FPS average.
At 4K, the choices become more constrained. Ultra settings yield 71 FPS average, which is playable but not ideal for fast-paced action. High settings at 4K produce 99 FPS, just under the 100 FPS mark. Medium settings at 4K deliver 115 FPS average with a minimum of 98 FPS and a maximum of 132 FPS, making it the best combination of visual fidelity and frame rate stability at this resolution. Low settings at 4K reach 155 FPS, which is smooth but sacrifices most graphical enhancements. The measured data indicates that 4K Medium is the sweet spot for this combo, as it maintains an average above 100 FPS while the minimum FPS of 98 suggests only rare dips below triple digits.
The measured FPS values show diminishing returns from High to Ultra at every resolution. At 1080p, the jump from High to Ultra costs 85 FPS (299 to 214). At 1440p, it costs 54 FPS (189 to 135). At 4K, it costs 28 FPS (99 to 71). The relative cost of Ultra shrinks as resolution increases, but the absolute frame rates also drop. The best experience per the measured rows appears to be High settings at 1080p or 1440p, or Medium settings at 4K, depending on the user's display resolution and preference for frame rate over visual details.
GPU Role
The AMD Radeon RX 9070 XT, built on the RDNA 4.0 architecture with the Navi 48 chip, plays the dominant role in Barony's performance at higher resolutions. The GPU has a base clock of 1660 MHz and a boost clock of 2970 MHz, with a game clock of 2400 MHz. Its 16 GB of GDDR6 memory on a 256-bit bus provides 644.6 GB/s of bandwidth, which is substantial for a roguelike title that may load many textures and assets. The memory runs at 2518 MHz with 20.1 Gbps effective speed, ensuring that memory bandwidth is unlikely to be a bottleneck in this game.
The GPU's compute resources include 4096 shading units, 256 texture mapping units, and 128 render output units. The pixel rate of 380.2 GPixel/s and texture rate of 760.3 GTexel/s provide ample throughput for Barony's rendering demands. The FP32 performance of 48.66 TFLOPS indicates strong raw compute capability, which is relevant for any shader-heavy effects in the game. The 64 ray tracing cores are present, though Barony's roguelike genre may not heavily utilize ray tracing features.
The VRAM capacity of 16 GB is more than sufficient for Barony at any resolution and setting combination tested. The fact that the 9070 XT maintains consistent frame rate scaling from 1080p to 4K suggests that memory capacity is not limiting performance. The GPU's passmark G3D score of 26795 places it in the 55th percentile among all GPUs, with nearest rivals including the AMD Radeon HD 7770M (deltaPct 0.1), NVIDIA GeForce GTX 570 (deltaPct 0.2), NVIDIA P106-090 (deltaPct 0.5), and AMD Radeon Pro 555 (deltaPct 1). These comparisons show the 9070 XT slightly ahead of these older or lower-tier GPUs in synthetic benchmarks.
In Barony specifically, the GPU's role becomes more pronounced as resolution increases. At 1080p, the frame rates are so high (469 FPS Low, 348 FPS Medium, 299 FPS High, 214 FPS Ultra) that the CPU may be contributing to the ceiling. However, at 4K, the GPU's rendering workload dominates, as shown by the 4K Ultra result of 71 FPS compared to 4K Medium at 115 FPS. The GPU's 304 W TDP and dual-slot design with 2x 8-pin power connectors indicate a high-power part that sustains performance under load. The PCIe 5.0 x16 bus interface provides ample bandwidth for data transfer, though Barony is unlikely to require more than PCIe 4.0 levels of throughput.
Measured FPS Breakdown
At 1920x1080, the measured average FPS values are 469 for Low, 348 for Medium, 299 for High, and 214 for Ultra. The Medium preset is the only one with reported minimum and maximum values: 296 FPS minimum and 401 FPS maximum. The 155 FPS spread between Low and Ultra at 1080p demonstrates the significant performance cost of higher quality settings. The data shows that 1080p Low is nearly double the frame rate of 1080p Ultra, which is a substantial gap for players who prioritize maximum frame rates over visual fidelity.
At 2560x1440, the averages are 296 FPS for Low, 220 FPS for Medium, 189 FPS for High, and 135 FPS for Ultra. The Medium preset again reports minimum and maximum values: 187 FPS and 253 FPS respectively. The spread between Low and Ultra at 1440p is 161 FPS, larger than at 1080p. This indicates that the GPU is working harder at 1440p, and the quality settings have a greater impact on performance. The 1440p Ultra result of 135 FPS is still smooth, but it represents a 44% drop from the 1440p Low result.
At 3840x2160, the averages are 155 FPS for Low, 115 FPS for Medium, 99 FPS for High, and 71 FPS for Ultra. The Medium preset reports a minimum of 98 FPS and a maximum of 132 FPS. The spread between Low and Ultra at 4K is 84 FPS, which is smaller in absolute terms than at lower resolutions but represents a 54% reduction from Low to Ultra. The 4K results show that only Low and Medium settings maintain averages above 100 FPS, while High and Ultra fall below that threshold.
The minimum FPS values provide additional insight into frame time consistency. At 1080p Medium, the minimum is 296 FPS, which is 85% of the average. At 1440p Medium, the minimum is 187 FPS, which is 85% of the average. At 4K Medium, the minimum is 98 FPS, which is 85% of the average. This consistent ratio suggests that frame pacing remains stable across resolutions, with no unexpected stutters or hitches appearing as the GPU load increases. The maximum FPS values follow a similar pattern: 401 at 1080p Medium, 253 at 1440p Medium, and 132 at 4K Medium.
How This Combo Ranks
The combination of the AMD Ryzen 5 7600 and AMD Radeon RX 9070 XT ranks 920th out of 3717 tested combos in Barony. This places it in the top 25% of all tested configurations, which is a strong showing for a desktop pairing of a mid-range CPU with a high-end GPU. The rank of 920 out of 3717 means that 2797 other combos perform worse, while 919 perform better. The percentile position suggests that this combo is well above average for Barony, though it is not among the elite top-tier configurations.
The CPU's individual performance metrics provide context for this ranking. The Ryzen 5 7600 has a percentile of 78 among all CPUs, with an average benchmark score of 26324. Its nearest rivals include the AMD Ryzen 9 6900HX (deltaPct 0.2), AMD Ryzen 7 7435HS (deltaPct -0.3), Intel Core i9-11900KF (deltaPct 0.4), and AMD Ryzen 5 8540U (deltaPct 0.5). These deltas are all within 0.5% of each other, indicating that the 7600's CPU performance is very similar to these other processors in synthetic benchmarks.
The GPU's individual ranking is lower, with a percentile of 55 among all GPUs and an average benchmark score of 13543. Its nearest rivals are the AMD Radeon HD 7770M (deltaPct 0.1), NVIDIA GeForce GTX 570 (deltaPct 0.2), NVIDIA P106-090 (deltaPct 0.5), and AMD Radeon Pro 555 (deltaPct 1). These are all older or lower-tier GPUs, and the 9070 XT sits just ahead of them in the synthetic benchmark scores. However, in Barony specifically, the combo's rank of 920 out of 3717 reflects the actual game performance, which may differ from synthetic benchmarks.
The fact that the combo ranks in the 920th position despite the GPU's modest 55th percentile suggests that Barony is likely more CPU-bound than GPU-bound in many scenarios, or that the CPU's strong single-thread performance (3dmark_single_thread score of 999) compensates for the GPU's mid-pack standing. The CPU's high percentile of 78, combined with the GPU's 55th percentile, produces a combo that performs better in Barony than either component's individual percentile would predict. This indicates a well-balanced pairing where the CPU can feed the GPU effectively, resulting in the 920th rank out of 3717 combos.
CPU Role
The AMD Ryzen 5 7600 is a 6-core, 12-thread processor based on the Zen 4 architecture with the Raphael codename. It has a base clock of 3.80 GHz and a boost clock of 5.10 GHz, operating within a 65 W TDP. The CPU supports DDR5 memory with dual-channel configuration, providing 83.2 GB/s of memory bandwidth. This memory bandwidth is sufficient for Barony's data requirements, as the game is unlikely to be memory-bandwidth-limited given the CPU's strong performance in synthetic benchmarks.
The CPU's cache hierarchy includes 64 KB of L1 cache per core, 1 MB of L2 cache per core, and 32 MB of shared L3 cache. This 32 MB L3 cache is particularly relevant for gaming, as it can hold frequently accessed game data and reduce latency. The Ryzen 5 7600's benchmark scores indicate strong multi-threaded performance: a Cinebench R23 multicore score of 12735, a Geekbench multicore score of 13413, and a Passmark multithread score of 27058. The single-thread performance is also solid, with a Cinebench R23 single-core score of 1852 and a 3dmark_single_thread score of 999.
In Barony, the CPU's role is most evident at lower resolutions where frame rates are extremely high. At 1080p Low, the average FPS of 469 suggests that the CPU can handle the game's logic and draw call overhead efficiently. The roguelike genre typically involves procedural generation and complex game state management, which can be CPU-intensive. The Ryzen 5 7600's 6 cores and 12 threads provide adequate parallelism for these tasks, though the game may not fully utilize all threads given its older release date of 2015.
The CPU's 78th percentile ranking among all CPUs, with an average benchmark score of 26324, places it above most processors in the database. Its nearest rivals include the AMD Ryzen 9 6900HX (deltaPct 0.2), which is a mobile chip, and the Intel Core i9-11900KF (deltaPct 0.4), which is a desktop part. The fact that the 7600 is competitive with these higher-tier or differently-classified CPUs suggests that its Zen 4 architecture provides efficient instruction execution. The CPU's 5 nm process node from TSMC, with 6,570 million transistors on a 71 mm² die, contributes to its power efficiency and performance.
The CPU's boost clock of 5.10 GHz is particularly important for Barony, as the game may have single-threaded components that benefit from high clock speeds. The measured FPS at 1080p, which reaches up to 469 FPS on Low settings, indicates that the CPU can drive very high frame rates when the GPU is not the bottleneck. The 3dmark_2_threads score of 1938 and 3dmark_4_threads score of 3686 show that the CPU scales well with additional threads, which could help with any multi-threaded game systems in Barony.
FAQ
Q: What is the best resolution for this combo in Barony?
A: The data shows that 1440p High provides 189 FPS average, which is above 144Hz displays, while 4K Medium delivers 115 FPS average with a minimum of 98 FPS. For the best balance of visual quality and frame rate, 1440p High or 4K Medium are the strongest measured options.
Q: How much faster is Low settings compared to Ultra at 4K?
A: At 3840x2160, Low settings average 155 FPS, while Ultra settings average 71 FPS. This represents a 84 FPS difference, with Low being more than twice as fast as Ultra at this resolution.
Q: Does the combo maintain stable frame times at 1440p Medium?
A: The measured minimum FPS at 1440p Medium is 187 FPS, with a maximum of 253 FPS and an average of 220 FPS. The minimum is 85% of the average, indicating stable frame pacing without significant dips.
Q: How does the Ryzen 5 7600 compare to its nearest CPU rivals?
A: The Ryzen 5 7600 has an average benchmark score of 26324, with deltaPct values of 0.2 against the AMD Ryzen 9 6900HX, -0.3 against the AMD Ryzen 7 7435HS, 0.4 against the Intel Core i9-11900KF, and 0.5 against the AMD Ryzen 5 8540U. All rivals are within 0.5% of the 7600's score.
Q: What is the combo's rank among all tested configurations in Barony?
A: The combo ranks 920th out of 3717 tested combinations, placing it in the top 25% of all configurations tested for Barony.
Q: Is the GPU or CPU the limiting factor at 1080p Ultra?
A: At 1080p Ultra, the average FPS is 214, which is still very high. The CPU's strong single-thread performance (3dmark_single_thread score of 999) and the GPU's 16 GB VRAM suggest that the GPU is likely the limiting factor at this setting, though the frame rate remains smooth for most displays.
Hardware Specifications
AMD Ryzen 5 7600
AMD Radeon RX 9070 XT
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7600 + AMD Radeon RX 9070 XT in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 155.0 |
| 3840x2160 | Medium | 115.0 |
| 3840x2160 | High | 99.0 |
| 3840x2160 | Ultra | 71.0 |
| 2560x1440 | Low | 296.0 |
| 2560x1440 | Medium | 220.0 |
| 2560x1440 | High | 189.0 |
| 2560x1440 | Ultra | 135.0 |
| 1920x1080 | Low | 469.0 |
| 1920x1080 | Medium | 348.0 |
| 1920x1080 | High | 299.0 |
| 1920x1080 | Ultra | 214.0 |
Barony with Ryzen 5 7600 + Other GPUs
See how Barony performs with the same CPU but different graphics cards.
Barony with RX 9070 XT + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with Ryzen 5 7600 + RX 9070 XT
Explore FPS benchmarks for other games using this same hardware combination.