Barony
This combination delivers exceptional performance with an average of 164 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 53 | 74 | 87 | 116 |
| 1440p QHD | 102 | 142 | 166 | 223 |
| 1080p Full HD | 162 | 225 | 263 | 353 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with AMD Ryzen 5 7400F + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis
Barony is a roguelike that clearly scales hard with resolution, and this Ryzen 5 7400F + RTX 3060 Ti pairing shows a textbook GPU-bound curve. At 1080p, the combo is effectively unlimited, pushing frame rates that far exceed display refresh rates. Moving to 1440p cuts performance by roughly a third to a half depending on settings, while 4K at Ultra is the only configuration that dips below the 60 FPS threshold. The data indicates that the limiting component shifts from the CPU at 1080p to the GPU at 4K, with the RTX 3060 Ti's 8 GB VRAM and 448.0 GB/s bandwidth becoming the primary constraint at higher pixel counts.
Resolution Scaling
The measured FPS values show a clear and consistent pattern: every step up in resolution produces a significant drop in average frame rate. At 1080p Low, the combo hits 353 FPS. That number falls to 223 FPS at 1440p Low, a 37% reduction, and then to 116 FPS at 4K Low, another 48% drop. This scaling is typical for a GPU-limited scenario, where the number of pixels being shaded grows exponentially with resolution.
The High preset tells a similar story. At 1080p High, you get 225 FPS, which drops to 142 FPS at 1440p High, a 37% decline. At 4K High, the average falls to 74 FPS, which is a 48% drop from 1440p. The Ultra preset shows the steepest curve: 162 FPS at 1080p, 102 FPS at 1440p, and just 53 FPS at 4K. The gap between 1080p and 1440p Ultra is 37%, and the gap between 1440p and 4K Ultra is 48%, matching the percentage drops seen in other presets.
This consistent percentage scaling indicates that the game is heavily reliant on pixel throughput. The CPU, a 6-core/12-thread Zen 4 part with a 4.70 GHz boost clock, has plenty of headroom at lower resolutions. At 1080p Low, the frame rate is likely capped by the CPU's ability to feed draw calls, but the GPU is still delivering 353 FPS, which is far beyond what any current display can show. The real bottleneck emerges at 4K, where the RTX 3060 Ti's raw shading power is insufficient to maintain high frame rates on the most demanding preset.
The Medium preset includes min and max FPS data, which provides insight into frame pacing. At 1080p Medium, the average is 263 FPS, with a min of 223 and a max of 302. At 1440p Medium, the average drops to 166 FPS, with a min of 141 and a max of 191. At 4K Medium, the average is 87 FPS, with a min of 74 and a max of 100. The delta between min and max FPS is consistent across resolutions, suggesting that the frame time variance remains stable even as the average drops. This points to a smooth experience without sudden stutters, even when the system is under heavy load.
FAQ
Q: What is the best resolution to play Barony with this hardware?
A: 1440p High offers an excellent balance, producing 142 FPS average. This is well above the 60 FPS threshold for smooth gameplay, while 4K High drops to 74 FPS, which is still playable but leaves less headroom for demanding scenes.
Q: Can this combo handle 4K at maximum settings?
A: At 4K Ultra, the average FPS is 53, which is below the 60 FPS target. This suggests that for a locked 60 FPS experience at 4K, you should use the High preset, which delivers 74 FPS.
Q: How does the RTX 3060 Ti's VRAM capacity affect performance?
A: The GPU has 8 GB of GDDR6 memory on a 256-bit bus with 448.0 GB/s bandwidth. At 4K Ultra, the data indicates this configuration is the limiting factor, as the average FPS drops to 53, likely due to texture and geometry data exceeding what the VRAM can efficiently manage.
Q: Is the CPU holding back the GPU at any resolution?
A: At 1080p Low, the system hits 353 FPS, which is likely near the CPU's maximum output for this game. At higher resolutions, the GPU becomes the bottleneck, as evidenced by the consistent percentage drops in FPS when moving from 1080p to 1440p and then to 4K.
Q: What is the expected performance increase from Low to Ultra at 1440p?
A: At 1440p Low, the average is 223 FPS. At 1440p Ultra, the average is 102 FPS, which is a 54% reduction in performance. This means you trade over half your frame rate for the highest visual fidelity.
Q: How does this combo rank compared to all tested systems?
A: This specific combination ranks 1422 out of 2935 tested combos for Barony. This places it in the upper-middle portion of the database, indicating it performs better than a majority of systems but is not at the top tier.
How This Combo Ranks
The combo of AMD Ryzen 5 7400F and NVIDIA GeForce RTX 3060 Ti ranks 1422 out of 2935 tested combinations for Barony. This percentile placement means the system is better than roughly 51% of all tested configs, but it is not a top-tier performer. The CPU itself is strong, ranking in the 83rd percentile against all CPUs, with an average benchmark score of 32750. Its nearest rivals include the Intel Core i5-14600T (avg score 32707, 0.1% slower) and the AMD Ryzen 7 PRO 6850H (avg score 32812, 0.2% faster), showing that the 7400F is competitive with mid-range desktop and high-end mobile parts.
The GPU, however, is the weaker link in this pairing. The RTX 3060 Ti ranks in the 59th percentile against all GPUs, with an average score of 16129. Its nearest rivals include the AMD Radeon RX 9060 (avg score 16014, 0.7% faster) and the AMD Radeon RX 5700 XT (avg score 16361, 1.4% faster). This suggests that while the CPU has headroom to push higher frame rates, the GPU is the component that determines the final FPS in Barony, especially at higher resolutions.
The rank of 1422 reflects this balance. In a game that is not heavily CPU-bound, the 3060 Ti’s mid-range position drags the overall combo ranking down, despite the 7400F’s solid performance. For context, if the CPU were paired with a higher-tier GPU, the combo rank would likely improve significantly. But as configured, this system sits in the middle of the pack, delivering good but not exceptional performance for the game.
Measured FPS Breakdown
The measured FPS data covers three resolutions and four quality presets, providing a complete picture of performance. At 1920x1080, the system is exceptionally fast. Low settings yield an average of 353 FPS, Medium yields 263 FPS (min 223, max 302), High yields 225 FPS, and Ultra yields 162 FPS. Even the most demanding 1080p preset produces frame rates that exceed any 1440p or 4K monitor's refresh rate, making this resolution ideal for competitive play or high-refresh displays.
At 2560x1440, performance drops to more manageable levels. Low settings produce 223 FPS, Medium produces 166 FPS (min 141, max 191), High produces 142 FPS, and Ultra produces 102 FPS. All of these are above 100 FPS, making 1440p a viable option for high-refresh gaming. The gap between Low and Ultra at this resolution is 121 FPS, showing that the visual settings have a profound impact on the GPU load.
At 3840x2160, the system starts to show its limits. Low settings average 116 FPS, which is still smooth, but Medium drops to 87 FPS (min 74, max 100), High drops to 74 FPS, and Ultra falls to 53 FPS. The 4K Ultra result is the only configuration in the entire dataset that fails to maintain 60 FPS. For a locked 60 FPS experience at 4K, you would need to use the High preset, which provides a 21 FPS buffer above the target. The Medium preset at 4K offers a 27 FPS buffer, but the visual quality difference between Medium and High is often worth the performance cost.
GPU Role
The NVIDIA GeForce RTX 3060 Ti is the primary driver of frame rate in Barony, particularly at higher resolutions. Its 8 GB of GDDR6 memory is paired with a 256-bit bus, yielding a bandwidth of 448.0 GB/s. This memory configuration is sufficient for 1080p and 1440p, but the data suggests it becomes a limiting factor at 4K Ultra, where the average FPS drops to 53. The GPU's 4864 shading units and 80 ROPs handle the pixel workload, but the sheer number of pixels at 3840x2160 overwhelms the card's capacity.
The clock speeds are 1410 MHz base and 1665 MHz boost. These are modest by modern standards, but the Ampere architecture's efficiency compensates. The GPU's 16.20 TFLOPS of FP32 performance is adequate for a roguelike like Barony, which is not known for high-end graphics. However, the benchmark results show that the card's performance scales predictably with resolution, confirming that the GPU is the bottleneck in this system.
The RTX 3060 Ti's position in the GPU landscape is mid-range. It sits in the 59th percentile against all GPUs, with an average benchmark score of 16129. Its nearest rival, the AMD Radeon RX 9060, scores 16014, a 0.7% difference. This means the 3060 Ti is a solid performer, but it is not a high-end card. For Barony, this translates to excellent performance at 1080p and 1440p, but 4K requires compromises in settings to achieve smooth frame rates.
Settings Recommendations
Based on the measured FPS data, the optimal settings depend on your target resolution and refresh rate. For 1080p, the Ultra preset is the best choice, as even the highest settings produce 162 FPS, which is more than enough for any 1440p or 4K display. There is no reason to drop below High settings at this resolution, as the GPU has ample headroom.
For 1440p, the High preset offers the best experience. With 142 FPS average, it provides a smooth experience on 144Hz monitors while maintaining high visual fidelity. The Ultra preset at 102 FPS is also viable for 144Hz displays, but the 40 FPS difference between High and Ultra may not justify the visual gains for most players. The Medium preset at 166 FPS is ideal for 165Hz monitors, but it sacrifices some graphical detail.
For 4K, the High preset is the recommended choice. It delivers 74 FPS, which clears the 60 FPS threshold with a comfortable margin. The Medium preset at 87 FPS is also viable, but the visual improvement from Medium to High is substantial in most games. The Ultra preset at 53 FPS is not recommended for 4K, as it falls below the standard 60 FPS target, leading to a less smooth experience. If you have a 120Hz 4K display, you would need to use the Low preset (116 FPS) to approach that refresh rate, but the visual quality would be significantly reduced.
Hardware Specifications
AMD Ryzen 5 7400F
NVIDIA GeForce RTX 3060 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7400F + NVIDIA GeForce RTX 3060 Ti in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 116.0 |
| 3840x2160 | Medium | 87.0 |
| 3840x2160 | High | 74.0 |
| 3840x2160 | Ultra | 53.0 |
| 2560x1440 | Low | 223.0 |
| 2560x1440 | Medium | 166.0 |
| 2560x1440 | High | 142.0 |
| 2560x1440 | Ultra | 102.0 |
| 1920x1080 | Low | 353.0 |
| 1920x1080 | Medium | 263.0 |
| 1920x1080 | High | 225.0 |
| 1920x1080 | Ultra | 162.0 |
Barony with Ryzen 5 7400F + Other GPUs
See how Barony performs with the same CPU but different graphics cards.
Barony with RTX 3060 Ti + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with Ryzen 5 7400F + RTX 3060 Ti
Explore FPS benchmarks for other games using this same hardware combination.