Barony

Barony

AVERAGE FPS
64
good

This combination provides smooth gameplay with an average of 64 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 21 29 34 45
1440p QHD 40 55 64 87
1080p Full HD 63 88 102 137

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 45
3840x2160 Medium 34
3840x2160 High 29
3840x2160 Ultra 21
2560x1440 Low 87
2560x1440 Medium 64
2560x1440 High 55
2560x1440 Ultra 40
1920x1080 Low 137
1920x1080 Medium 102
1920x1080 High 88
1920x1080 Ultra 63

Barony with AMD Ryzen 5 5600F + NVIDIA GeForce GTX 1650, In-Depth Analysis

The AMD Ryzen 5 5600F and NVIDIA GeForce GTX 1650 pairing targets a specific niche: 1080p gaming with a preference for high frame rates in lighter titles. In Barony, a roguelike with a 2015 release date, this combination produces a wide spread of results depending on resolution and quality settings. The data indicates that the GTX 1650, with its 4 GB of GDDR5 memory, becomes the primary constraint at higher resolutions, while the Ryzen 5 5600F’s six Zen 3 cores provide ample headroom for the CPU-bound aspects of the game. This analysis breaks down the measured performance, contextualizes the combo’s standing among other tested systems, and offers practical settings guidance based solely on the provided benchmark figures.

FAQ

Q: What is the overall rank of this CPU and GPU combo in Barony?

A: The combo ranks 2843 out of 2935 tested combinations in this game. This places it in the lower percentile of all systems tested, indicating that while it can run the game, many other configurations deliver higher frame rates.

Q: How does the GTX 1650 compare to its nearest rivals in general GPU benchmarks?

A: The GTX 1650 has an average benchmark score of 7472. Its closest rival, the AMD Radeon HD 8850M, scores 7447, a delta of 0.3 percent. The Intel UHD Graphics 750 and AMD Radeon R7 350 are also close, with deltas of 0.4 and 0.6 percent respectively. The Intel Arc A310 is slightly ahead with a score of 7550, a -1 percent delta relative to the GTX 1650.

Q: What is the best average FPS achievable at 1920x1080 with this hardware?

A: At 1920x1080 with Low settings, the measured average FPS is 137. This is the highest average frame rate recorded for this combo in Barony across all tested settings and resolutions.

Q: Can this system handle 4K resolution in Barony?

A: At 3840x2160, the results are playable but limited. With Low settings, the average FPS is 45. Medium settings drop this to 34, High to 29, and Ultra to 21. The Ultra preset at 4K is the only configuration where the average FPS falls below 30.

Q: What is the CPU’s performance percentile compared to all other processors?

A: The AMD Ryzen 5 5600F scores in the 85th percentile among all CPUs. This indicates it performs better than the majority of processors in general benchmark tests, despite being a mid-range part.

Q: Does the GTX 1650 support modern graphics APIs needed for Barony?

A: Yes. The GPU supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4. This ensures compatibility with the rendering requirements of the game, which was released in 2015.

How This Combo Ranks

The combo’s rank of 2843 out of 2935 tested combinations in Barony is a clear signal of its position. With only 92 combinations ranking below it, this system is near the bottom of the performance distribution for this specific game. This does not mean the game is unplayable, but it does mean the experience is heavily dependent on settings and resolution. The data shows that the pairing is fundamentally limited by the GPU. The GTX 1650 sits in the 40th percentile of all GPUs, with an average benchmark score of 7472. In contrast, the Ryzen 5 5600F is in the 85th percentile of all CPUs, with an average benchmark score of 36945. This imbalance suggests that the CPU is capable of feeding frames faster than the GPU can render them, especially at lower resolutions.

When examining the nearest rivals for the CPU, the Ryzen 5 5600F’s average score of 36945 is nearly identical to the Intel Core Ultra 5 225’s 36938, a delta of 0 percent. The AMD Ryzen 5 5500X3D is 0.2 percent ahead, and the AMD Ryzen AI 7 PRO 450 is 0.4 percent ahead. The Intel Core i9-12900T is 0.5 percent ahead with a score of 37112. These differences are negligible in real-world gaming, which reinforces the idea that the CPU is not the bottleneck here. For the GPU, the nearest rivals are all within a 1 percent delta, with the Intel Arc A310 being the only one that scores higher. This clustering suggests that the GTX 1650’s performance is typical for its class, but that class is simply not powerful enough for high-end Barony settings at high resolutions.

The practical takeaway from the ranking is that this combo is best suited for 1080p or 1440p gaming with adjusted settings. The measured FPS data supports this, showing that the system can achieve 137 FPS at 1080p Low but only 21 FPS at 4K Ultra. The rank reflects a system that is more than adequate for competitive or fast-paced play at lower settings, but it will struggle to maintain high visual fidelity at higher resolutions. For a game like Barony, which is a roguelike and not a fast-paced shooter, the lower frame rates at higher resolutions might be acceptable, but the data shows that the best experience is found at 1080p.

GPU Role

The NVIDIA GeForce GTX 1650 is the definitive performance limiter in this pairing. Its 4 GB of GDDR5 memory on a 128-bit bus provides a bandwidth of 128.1 GB/s. The GPU has a base clock of 1485 MHz and a boost clock of 1665 MHz. These specifications place it firmly in the entry-level segment, as reflected in its 40th percentile ranking among all GPUs. The GPU’s average benchmark score of 7472 is modest, and its nearest rivals—the AMD Radeon HD 8850M, Intel UHD Graphics 750, AMD Radeon R7 350, and Intel Arc A310—are all within a 1 percent delta. This means the GTX 1650 is not an outlier in either direction; it performs exactly as expected for its class.

In Barony, the GPU’s role becomes clear when examining the FPS scaling across resolutions. At 1920x1080 Low, the average FPS is 137. Moving to 2560x1440 Low drops this to 87, a reduction of 36 percent. At 3840x2160 Low, the average FPS falls to 45, which is 67 percent lower than the 1080p figure. This scaling is typical for a GPU with limited memory bandwidth and pixel throughput. The GTX 1650’s pixel rate is 53.28 GPixel/s and its texture rate is 93.24 GTexel/s. These figures, combined with 896 shading units and 32 ROPs, explain why higher resolutions cause such significant performance drops.

The memory configuration is another key factor. With only 4 GB of VRAM, the GTX 1650 may struggle with texture-heavy scenes at higher resolutions. The data shows that at 3840x2160 Medium, the average FPS is 34 with a minimum of 29 and maximum of 39. At 2560x1440 Medium, the average is 64 with a range of 55 to 74. This suggests that the game is not necessarily running out of memory at these settings, but the GPU’s compute and memory bandwidth limits are being hit. The boost clock of 1665 MHz is relatively low compared to modern GPUs, but it is consistent with the Turing architecture’s focus on efficiency over raw power.

For Barony, the GPU is the primary determinant of whether the game is playable. The CPU is more than capable of handling the game’s logic and physics, but the GPU must render each frame. The data indicates that the GTX 1650 can deliver smooth frame rates at 1080p, but at 4K, the user must accept significant compromises. The measured FPS at 4K Ultra is 21, which is below the threshold for smooth gameplay. Even at 4K Low, the average FPS of 45 is playable but not ideal. The GPU’s role is therefore to enable playable frame rates at lower resolutions, with the understanding that higher settings will require a more powerful graphics card.

Measured FPS Breakdown

The measured FPS data provides a detailed view of how this combo performs across three resolutions and four settings presets. At 1920x1080, the system is at its best. Low settings produce an average of 137 FPS, which is exceptionally smooth for any game. Medium settings drop this to 102 FPS, with a minimum of 87 and maximum of 117. High settings yield 88 FPS, and Ultra produces 63 FPS. These numbers show a clear progression: as settings increase, the frame rate decreases, but even Ultra at 1080p remains playable. The gap between Low and Ultra is 74 FPS, which indicates a significant performance cost for higher visual quality. For a roguelike, the 63 FPS at Ultra is perfectly acceptable, as the game does not require the fast reaction times of a competitive shooter.

Moving to 2560x1440, the performance drops noticeably. Low settings average 87 FPS, which is still smooth. Medium settings average 64 FPS, with a minimum of 55 and maximum of 74. High settings produce 55 FPS, and Ultra falls to 40 FPS. The trend is consistent with the 1080p results, but the absolute numbers are lower. The drop from 1080p to 1440p at Low settings is 50 FPS (137 to 87), which is a 36 percent reduction. At Ultra, the drop is 23 FPS (63 to 40), a 37 percent reduction. This proportional decrease suggests that the GPU is scaling predictably with pixel count, and there are no unexpected bottlenecks or memory issues at this resolution. The 40 FPS at Ultra is borderline playable, but many users would prefer to lower settings to maintain a higher frame rate.

At 3840x2160, the system is clearly out of its comfort zone. Low settings average 45 FPS, which is playable but not smooth. Medium settings average 34 FPS, with a minimum of 29 and maximum of 39. High settings average 29 FPS, and Ultra drops to 21 FPS. The minimum FPS at Medium (29) is below the 30 FPS threshold often considered the minimum for playability. This suggests that even with medium settings, there will be moments of noticeable stutter. The 21 FPS at Ultra is effectively unplayable for any action-oriented gameplay. The data shows that 4K is only viable with Low settings, and even then, the frame rate is not ideal. The scaling from 1440p to 4K at Low settings is a 42 FPS drop (87 to 45), which is a 48 percent reduction, further confirming the GPU’s limitations at high pixel counts.

The measured FPS values also reveal the settings scaling within each resolution. At 1080p, the jump from Low to Medium costs 35 FPS (137 to 102), from Medium to High costs 14 FPS (102 to 88), and from High to Ultra costs 25 FPS (88 to 63). This non-linear scaling indicates that Medium settings offer the best balance of performance and quality at 1080p. At 1440p, the same jumps are 23 FPS (87 to 64), 9 FPS (64 to 55), and 15 FPS (55 to 40). At 4K, the jumps are 11 FPS (45 to 34), 5 FPS (34 to 29), and 8 FPS (29 to 21). The diminishing returns at higher resolutions suggest that the GPU is becoming the limiting factor, and lowering settings has less impact on performance than at 1080p.

CPU Role

The AMD Ryzen 5 5600F is a six-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer. It has a base clock of 3.00 GHz and a boost clock of 4.00 GHz, with a 65 W TDP. The CPU’s cache configuration includes 64 KB of L1 per core, 512 KB of L2 per core, and 32 MB of shared L3 cache. These specifications make it a solid mid-range processor, as evidenced by its 85th percentile ranking among all CPUs. The average benchmark score of 36945 is nearly identical to its nearest rivals, which include the Intel Core Ultra 5 225 and AMD Ryzen 5 5500X3D. The differences are within 0.5 percent, meaning that in CPU-bound scenarios, this processor performs on par with its direct competitors.

In Barony, the CPU’s role is less critical than the GPU’s, but it still matters. The game was released in 2015, and its engine is not likely to be heavily multithreaded. The Ryzen 5 5600F’s six cores and 12 threads provide more than enough processing power for the game’s logic, AI, and physics. The single-thread performance, as measured by a Passmark single-thread score of 2872, is robust and ensures that the game’s main thread will not be a bottleneck. The data shows that the CPU is not limiting performance in any of the measured configurations. For example, at 1080p Low, the average FPS is 137, which is a high frame rate that requires a capable CPU to maintain. The fact that the GPU is the limiting factor is evident from the FPS scaling with resolution: as resolution increases, the GPU becomes more strained, but the CPU’s workload remains relatively constant.

The CPU’s memory support includes DDR4 with dual-channel configuration and a bandwidth of 51.2 GB/s. This is sufficient for the game’s memory demands. The L3 cache of 32 MB is shared across all cores, which helps with data locality and reduces latency. The Passmark benchmarks show strong performance in multithreaded tasks, with a multithread score of 19236 and an integer math score of 59339. These scores indicate that the CPU can handle any background tasks while gaming without causing frame drops. The floating-point math score of 34548 and extended instructions score of 16266 further confirm its capability.

The nearest rivals for the CPU all have average scores within a 0.5 percent delta, which means that swapping the Ryzen 5 5600F for any of them would result in negligible performance differences in Barony. The CPU’s 85th percentile ranking places it above the majority of processors, and this is reflected in the fact that it does not bottleneck the GTX 1650 at any resolution or setting. The data suggests that if a user were to upgrade the GPU, the CPU would still be able to keep up with a more powerful graphics card, at least in this game. The Ryzen 5 5600F’s boost clock of 4.00 GHz is adequate for the game’s single-threaded workload, and the six cores provide headroom for any future games that may utilize more threads.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the user’s priority: frame rate or visual quality. For the best overall experience, 1920x1080 with Medium settings is the recommended starting point. The average FPS of 102, with a minimum of 87 and maximum of 117, provides a smooth and responsive experience. The minimum FPS of 87 ensures that there are no significant drops below the refresh rate of most 60 Hz monitors, and the average of 102 is high enough to take advantage of 100 Hz displays. Medium settings also offer a substantial visual improvement over Low settings, making this the best balance of performance and quality.

If the user prioritizes maximum frame rate, 1920x1080 with Low settings is the clear choice. The average FPS of 137 is extremely smooth and will be a benefit in any fast-paced action sequences. However, the visual quality at Low settings may be noticeably reduced, with simpler textures and lighting. For users with 1440p monitors, 2560x1440 with Low settings is the only configuration that provides a consistently smooth experience, with an average FPS of 87. Medium settings at 1440p average 64 FPS, which is playable but may show stutters during heavy scenes, as indicated by the minimum FPS of 55. High settings at 1440p drop to 55 FPS average, and Ultra falls to 40 FPS, which is below the ideal range for smooth gameplay.

At 4K, the recommendations are more constrained. 3840x2160 with Low settings is the only viable option for playable frame rates, with an average of 45 FPS. Medium settings at 4K average 34 FPS, but the minimum of 29 FPS means there will be noticeable hitches. High and Ultra settings at 4K are not recommended, as the average FPS of 29 and 21 respectively fall below the 30 FPS threshold for basic playability. For users with 4K displays, the data suggests that this combo is not suitable for the game at high settings, and they should either lower the resolution to 1440p or accept the reduced visual quality at 4K Low.

In summary, the settings recommendations are as follows: for 1080p, use Medium for a balanced experience or Low for maximum frame rate; for 1440p, use Low for smooth performance or Medium if visual quality is more important; for 4K, use Low settings only. The data shows that the GTX 1650 is the limiting factor, and the Ryzen 5 5600F provides enough CPU performance to avoid being a bottleneck. Users should adjust settings based on their display resolution and personal preference for frame rate versus visual fidelity. The measured FPS values provide a clear guide: aim for an average FPS of at least 60 for the best experience, and avoid configurations where the minimum FPS drops below 30.

Hardware Specifications

AMD Ryzen 5 5600F

Cores / Threads 6 / 12
Base Clock 3000 MHz
Boost Clock 4000 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce GTX 1650

VRAM 4 GB GDDR5
Base Clock —
Boost Clock 1665 MHz MHz
TDP 75 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5600F + NVIDIA GeForce GTX 1650 in Barony

Resolution Settings Avg FPS
3840x2160 Low 45.0
3840x2160 Medium 34.0
3840x2160 High 29.0
3840x2160 Ultra 21.0
2560x1440 Low 87.0
2560x1440 Medium 64.0
2560x1440 High 55.0
2560x1440 Ultra 40.0
1920x1080 Low 137.0
1920x1080 Medium 102.0
1920x1080 High 88.0
1920x1080 Ultra 63.0

Barony with Ryzen 5 5600F + Other GPUs

See how Barony performs with the same CPU but different graphics cards.

Barony with GTX 1650 + Other CPUs

See how Barony performs with the same GPU but different processors.

Other Games with Ryzen 5 5600F + GTX 1650

Explore FPS benchmarks for other games using this same hardware combination.