Barony
This combination delivers exceptional performance with an average of 188 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 61 | 85 | 99 | 134 |
| 1440p QHD | 117 | 163 | 190 | 256 |
| 1080p Full HD | 185 | 259 | 301 | 405 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with AMD Ryzen 5 3600 + NVIDIA GeForce RTX 3070 Ti, In-Depth Analysis
# Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The measured FPS data for Barony with the AMD Ryzen 5 3600 and NVIDIA GeForce RTX 3070 Ti reveals a clear and consistent scaling pattern across resolutions. At 1080p High settings, the combo delivers 259 FPS average. Moving to 1440p High drops this to 163 FPS, a reduction of approximately 37%. Stepping up to 4K High yields 85 FPS, which is another 48% drop from 1440p. This steep decline from 1440p to 4K, combined with the relatively modest drop from 1080p to 1440p, indicates that the GPU becomes the dominant limiting factor as resolution increases.
The Low settings preset tells an even more instructive story. At 1080p Low, the system reaches 405 FPS average. At 1440p Low, it still achieves 256 FPS, and at 4K Low, 134 FPS. The fact that even at 4K Low the framerate remains well above 120 FPS suggests the game is not exceptionally demanding, but the scaling from 1440p to 4K (a 48% drop) is nearly identical to the High preset's drop (48%). This consistency across presets indicates that the resolution scaling behavior is driven primarily by pixel throughput rather than by settings-dependent effects.
The Medium preset data reinforces this interpretation. At 1080p Medium, the average is 301 FPS, dropping to 190 FPS at 1440p and 99 FPS at 4K. The percentage drops are 37% and 48% respectively, matching the High preset almost exactly. This uniformity suggests that Barony's rendering load scales linearly with pixel count, and the RTX 3070 Ti's 8 GB of GDDR6X memory is not a bottleneck at any tested resolution.
At Ultra settings, the pattern shifts slightly. The 1080p Ultra average is 185 FPS, dropping to 117 FPS at 1440p and 61 FPS at 4K. The 4K Ultra result is the only measurement below 60 FPS in the entire dataset, and it sits at 61 FPS. This indicates that Ultra settings introduce additional GPU workload that compounds with the 4K pixel count, pushing the RTX 3070 Ti to its limits. The data suggests that the GPU is the primary limiting component at 4K for all presets, while at 1080p and 1440p, the CPU may still have headroom, given the extremely high framerates achieved.
# GPU Role — VRAM, clocks, and how they relate to this game's results
The NVIDIA GeForce RTX 3070 Ti is built on the Ampere architecture with a GA104 chip, fabricated on Samsung's 8 nm process. It features 6,144 shading units, 192 texture mapping units, and 96 raster output units. The GPU operates at a base clock of 1575 MHz and a boost clock of 1770 MHz, with memory clocked at 1188 MHz, translating to 19 Gbps effective on its GDDR6X memory. The memory subsystem consists of 8 GB on a 256-bit bus, providing 608.3 GB/s of bandwidth.
For Barony, a roguelike title, the GPU's raw compute capabilities are more than sufficient. The measured FPS data shows that even at 4K Ultra, the system holds 61 FPS average, which is a demanding configuration for most games. The 8 GB VRAM appears adequate across all tested settings and resolutions, as no measurement indicates a memory capacity limitation. The 21.75 TFLOPS FP32 performance and 339.8 GTexel/s texture rate are likely key contributors to the high framerates observed, particularly at lower resolutions where the GPU is not fully saturated.
The RTX 3070 Ti's 75th percentile ranking among all GPUs places it in the upper tier of graphics cards. Its nearest rivals include the RTX 5070 Mobile (0.1% ahead), AMD Radeon RX 6800 (0.5% behind), and RTX 2080 Ti (0.5% ahead). This competitive positioning suggests that the GPU's performance in Barony is consistent with its general benchmark standing, though the game's roguelike nature may not fully stress all GPU subsystems.
The GPU's 48 ray tracing cores and 192 tensor cores are present, but Barony's rendering workload likely does not heavily utilize these features, given the genre. The pixel rate of 169.9 GPixel/s and texture rate of 339.8 GTexel/s are more relevant to the measured FPS, as these determine how quickly the GPU can fill pixels and apply textures. The data shows that the GPU's capabilities scale predictably with resolution, with the 4K Ultra result at 61 FPS being the only point where performance dips below 60 FPS, indicating that the GPU is the limiting component at that extreme configuration.
# Settings Recommendations — which preset gives the best experience per the measured rows
Based on the measured FPS data, the Medium preset at 1440p offers the most balanced experience. At 1440p Medium, the system delivers 190 FPS average with a minimum of 162 FPS and maximum of 219 FPS. This provides a smooth, high-refresh-rate experience with visual quality improvements over Low. The 4K Medium preset, at 99 FPS average with a minimum of 84 FPS, is also viable for users prioritizing resolution over maximum smoothness.
For users with 1080p displays, the Ultra preset at 185 FPS average is entirely playable and provides the best visual quality within the measured data. The 1080p Ultra result of 185 FPS is well above typical display refresh rates, and the GPU has ample headroom at this resolution. The 1440p Ultra preset at 117 FPS average is also excellent for high-refresh-rate monitors, though it is not as fluid as the Medium preset's 190 FPS.
At 4K, the choice becomes more situational. The Low preset at 134 FPS average is the only 4K option that maintains triple-digit framerates. The Medium preset at 99 FPS is still smooth, while High at 85 FPS and Ultra at 61 FPS are progressively more demanding. For competitive play or high-refresh-rate 4K displays, 4K Low is the recommended preset based on the data. For visual fidelity at 4K, Medium at 99 FPS offers the best compromise between quality and performance, as it maintains a minimum of 84 FPS, which is above typical 60 Hz display refresh rates.
The High preset, while not the best performer at any resolution, provides a consistent experience across all three resolutions: 259 FPS at 1080p, 163 FPS at 1440p, and 85 FPS at 4K. This consistency may appeal to users who switch between resolutions without adjusting settings. However, the data indicates that Medium offers higher framerates than High at every resolution, suggesting that High's visual improvements come at a measurable performance cost without proportional benefit.
# Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
At 1920x1080, the measured averages range from 185 FPS at Ultra to 405 FPS at Low. The Medium preset achieves 301 FPS average with a minimum of 256 FPS and maximum of 346 FPS. High sits between Medium and Ultra at 259 FPS average. The spread from Low to Ultra is 220 FPS, with Ultra delivering 54% of the Low preset's performance.
At 2560x1440, Low achieves 256 FPS average, Medium 190 FPS with a minimum of 162 and maximum of 219, High 163 FPS, and Ultra 117 FPS. The scaling from Low to Ultra shows a 54% reduction in framerate, consistent with the 1080p pattern. The 1440p results are roughly 63% of the corresponding 1080p results across all presets, reflecting the increased pixel count.
At 3840x2160, the results are 134 FPS at Low, 99 FPS at Medium with a minimum of 84 FPS and maximum of 114 FPS, 85 FPS at High, and 61 FPS at Ultra. The 4K results are 33% of the 1080p results on average across presets, which is consistent with the 4x pixel count difference between these resolutions being partially offset by the GPU's capabilities.
The minimum FPS values are only recorded for the Medium preset at each resolution: 256 FPS at 1080p, 162 FPS at 1440p, and 84 FPS at 4K. These minimums are 85%, 85%, and 85% of their respective averages, indicating consistent frametimes with no significant stuttering observed in the data. The maximum FPS values for Medium are 346 at 1080p, 219 at 1440p, and 114 at 4K, showing headroom above the averages.
# How This Combo Ranks — use comboRankInGame vs other tested combos
The combination of the AMD Ryzen 5 3600 and NVIDIA GeForce RTX 3070 Ti ranks 1333 out of 3717 tested combos in Barony. This places it in the 64th percentile of all tested configurations, meaning approximately 64% of tested combos perform worse, while 36% perform better. Given the hardware's specifications, this ranking is consistent with a mid-to-upper tier setup that comfortably handles the game at high settings.
The CPU, AMD Ryzen 5 3600, has a percentile ranking of 71 among all CPUs, with an average benchmark score of 17035. Its nearest rivals are the Intel Core i7-1260P (0.2% ahead), AMD EPYC 7742 (0.2% ahead), and Intel Core i5-11400 (0.2% behind). The GPU, RTX 3070 Ti, ranks in the 75th percentile among all GPUs with an average benchmark score of 29945, placing it near the RTX 5070 Mobile (0.1% ahead) and AMD Radeon RX 6800 (0.5% behind).
The combo's rank of 1333 out of 3717 suggests that while the individual components are strong, the combination is not at the top of the leaderboard for Barony. This could be due to the game's roguelike nature, which may not heavily utilize multi-threaded CPU performance or extreme GPU capabilities. The Ryzen 5 3600's 6 cores and 12 threads, with a base clock of 3.60 GHz and boost of 4.20 GHz, provide solid single-threaded performance as evidenced by its 3DMark single-thread score of 696, but Barony may not fully leverage its multi-threading capabilities.
The RTX 3070 Ti's 8 GB VRAM and 608.3 GB/s bandwidth are more than adequate for this game, as shown by the high framerates at all resolutions. The combo's ranking indicates that there are 1,332 configurations that achieve better performance in Barony, but the majority of tested combos (2,384) perform worse. This places the setup in a comfortable position for playing Barony at any of the tested settings and resolutions.
# FAQ
Q: What is the best resolution for this combo in Barony?
A: Based on the measured data, 1440p offers the best balance. The Medium preset at 1440p achieves 190 FPS average with a minimum of 162 FPS, providing smooth gameplay with good visual quality.
Q: Can this combo handle 4K in Barony?
A: Yes, all tested 4K presets exceed 60 FPS average. The lowest result is 61 FPS at 4K Ultra, while 4K Low reaches 134 FPS average.
Q: How much performance is lost going from 1080p to 4K?
A: At High settings, the framerate drops from 259 FPS at 1080p to 85 FPS at 4K, a 67% reduction. At Ultra settings, it drops from 185 FPS to 61 FPS, a 67% reduction as well.
Q: Is the Medium preset a good choice for this game?
A: Yes, the Medium preset provides the highest framerates among all presets at every resolution. At 1080p it achieves 301 FPS, at 1440p 190 FPS, and at 4K 99 FPS.
Q: What is the combo's ranking among all tested configurations in Barony?
A: The combo ranks 1333 out of 3717 tested combos, placing it in a position where roughly 64% of tested configurations perform worse.
Q: Does the GPU or CPU limit performance more in this game?
A: The data suggests the GPU becomes the limiting factor at higher resolutions. The framerate drops by approximately 37% from 1080p to 1440p and 48% from 1440p to 4K, indicating increasing GPU load. At 1080p, the very high framerates (up to 405 FPS at Low) suggest the CPU may be the limiting component.
# CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 5 3600 is a 6-core, 12-thread processor based on the Zen 2 architecture, codenamed Matisse. It operates at a base clock of 3.60 GHz and boost clock of 4.20 GHz, with a 65 W TDP. The CPU has a total of 32 MB of shared L3 cache, along with 64 KB L1 and 512 KB L2 cache per core. It supports DDR4 memory with dual-channel architecture, providing 51.2 GB/s of memory bandwidth.
In synthetic benchmarks, the Ryzen 5 3600 demonstrates strong multi-threaded performance with a Cinebench R23 multi-core score of 15,045 and a single-core score of 2,124. Its PassMark multithread score of 17,700 and single-thread score of 2,562 further confirm its capabilities. The CPU's 3DMark scores show scaling from 696 single-thread to 4,605 at 16 threads, indicating good multi-threading efficiency.
For Barony, the CPU's role appears to be more significant at lower resolutions where the GPU is not fully saturated. At 1080p Low, the system achieves 405 FPS average, which is an extremely high framerate that likely approaches the CPU's rendering limit. The single-threaded performance, as indicated by the 3DMark single-thread score of 696 and Geekbench single-core score of 1,536, is crucial for maintaining high framerates in a game that may have serial rendering dependencies.
The CPU's 71st percentile ranking among all CPUs places it above average, with an average benchmark score of 17,035. Its nearest rivals include the Intel Core i7-1260P (0.2% ahead) and Intel Core i5-11400 (0.2% behind), indicating that the Ryzen 5 3600 is competitive with more recent mid-range processors. The 12 threads and 6 cores provide sufficient parallelism for modern games, though Barony's roguelike genre may not heavily utilize all available threads.
At 1440p and 4K, the CPU's influence diminishes as the GPU becomes the bottleneck. The consistent 37% and 48% framerate drops across presets when moving to higher resolutions indicate that the GPU's pixel throughput is the primary constraint. However, the CPU's ability to maintain high framerates at 1080p (up to 405 FPS) suggests it is not holding back the system at lower resolutions. The combination of the Ryzen 5 3600's strong single-threaded performance and adequate multi-threading makes it well-suited for Barony, though the GPU clearly dominates the performance profile at higher resolutions.
Hardware Specifications
AMD Ryzen 5 3600
NVIDIA GeForce RTX 3070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 3600 + NVIDIA GeForce RTX 3070 Ti in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 134.0 |
| 3840x2160 | Medium | 99.0 |
| 3840x2160 | High | 85.0 |
| 3840x2160 | Ultra | 61.0 |
| 2560x1440 | Low | 256.0 |
| 2560x1440 | Medium | 190.0 |
| 2560x1440 | High | 163.0 |
| 2560x1440 | Ultra | 117.0 |
| 1920x1080 | Low | 405.0 |
| 1920x1080 | Medium | 301.0 |
| 1920x1080 | High | 259.0 |
| 1920x1080 | Ultra | 185.0 |
Barony with Ryzen 5 3600 + Other GPUs
See how Barony performs with the same CPU but different graphics cards.
Barony with RTX 3070 Ti + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with Ryzen 5 3600 + RTX 3070 Ti
Explore FPS benchmarks for other games using this same hardware combination.