Barony

Barony

AVERAGE FPS
214
excellent

This combination delivers exceptional performance with an average of 214 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 71 99 113 156
1440p QHD 138 188 222 294
1080p Full HD 215 299 351 419

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 156
3840x2160 Medium 113
3840x2160 High 99
3840x2160 Ultra 71
2560x1440 Low 294
2560x1440 Medium 222
2560x1440 High 188
2560x1440 Ultra 138
1920x1080 Low 419
1920x1080 Medium 351
1920x1080 High 299
1920x1080 Ultra 215

Barony with AMD Ryzen 5 2600 + NVIDIA GeForce RTX 3080 Ti, In-Depth Analysis

Barony, a roguelike from 2015, paired with the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 3080 Ti, presents a fascinating study in system bottleneck dynamics. The data indicates a configuration where the GPU's immense power is frequently held in check by the older CPU, leading to performance scaling that defies typical expectations. This analysis examines the measured FPS data to understand where the limits lie and how this specific combo navigates the game's demands.

Resolution Scaling

The most striking observation in the data is the non-linear relationship between resolution and frame rate. At 1080p with Low settings, the combo achieves 419 FPS. Moving to 1440p Low drops this to 294.1 FPS, a 124.9 FPS decrease, and at 4K Low, the average falls further to 156.1 FPS. This scaling pattern suggests that at lower resolutions, the CPU is the primary limiting factor, as the GPU has ample headroom to render frames quickly but is waiting on the processor to feed it data.

The story changes at higher settings. For Ultra settings, the drop from 1080p (214.9 FPS) to 1440p (137.7 FPS) is a substantial 77.2 FPS, and then a further 66.5 FPS drop to 4K (71.2 FPS). The 4K Ultra figure of 71.2 FPS is a dramatic reduction from the 1080p Low figure, indicating that as the graphical load increases, the RTX 3080 Ti's rendering work becomes the dominant constraint. The data implies a classic crossover: the CPU limits performance in light-load scenarios, while the GPU takes over as the bottleneck when pixel count and settings increase.

CPU Role

The AMD Ryzen 5 2600 is a 6-core, 12-thread processor from the 2000 series, based on the Zen architecture. Its base clock of 3.40 GHz and boost clock of 3.90 GHz are modest by modern standards. Benchmark results show it sits at the 77th percentile of all CPUs, with an average benchmark score of 19616. Its nearest rivals include the Intel Core i5-11600KF (deltaPct -0.6) and the Intel Core i7-10700F (deltaPct 0.7), placing it in a competitive but not leading position.

In Barony, the CPU's influence is most apparent in the high frame rates achieved at 1080p Low. The 419 FPS figure is extraordinarily high, and it is likely that the Ryzen 5 2600's single-thread performance, evidenced by a Cinebench R23 single-core score of 1579, is a significant factor. However, the game's engine, being from 2015, may not fully utilize the 12 threads available. The data suggests that while the CPU can push frame rates to extreme levels, it cannot sustain them as the GPU workload increases, leading to the severe drops seen at higher settings.

How This Combo Ranks

Within the comprehensive database of tested combinations, this pairing of the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 3080 Ti holds the rank of 510 out of 1702 combos in Barony. This places the configuration in the top 30% of all tested systems. Given the extreme frame rates measured, this ranking might seem low, but it reflects the fact that many other combos, likely with newer CPUs, achieve even higher scores.

The rank is a measure of overall performance across all tested scenarios. The data indicates that the combo is powerful, but it is not at the absolute top. The RTX 3080 Ti, which sits at the 83rd percentile of all GPUs and is closely rivaled by the RTX 3090 (deltaPct -0.5), is a top-tier card. Yet, the overall combo rank is dragged down by the CPU's comparative weakness. This suggests that a different, more modern CPU paired with the same GPU would likely achieve a significantly better rank, highlighting the CPU as a limiting factor in this specific pairing.

FAQ

Q: What is the maximum average FPS achieved by this combo in Barony?

A: The highest recorded average FPS is 419, which occurs at 1920x1080 resolution with Low settings.

Q: How does the combo perform at 4K Ultra settings?

A: At 3840x2160 with Ultra settings, the average FPS drops significantly to 71.2, indicating a heavy GPU load.

Q: Is the CPU or GPU more likely to be the bottleneck at 1080p Low?

A: The very high frame rate of 419 FPS at 1080p Low suggests the CPU is the limiting factor, as the GPU can render frames faster than the CPU can provide them.

Q: What is the framerate difference between 1080p and 4K on High settings?

A: The average FPS on High settings drops from 299 at 1080p to 98.5 at 4K, a difference of 200.5 FPS.

Q: How does the Ryzen 5 2600 compare to its nearest rivals?

A: The Ryzen 5 2600 has an average benchmark score of 19616, which is 0.6% higher than the AMD Ryzen 5 7530U and 0.7% higher than the Intel Core i7-10700F.

Q: What is the best resolution for high refresh rate gaming with this combo?

A: For frame rates above 240 FPS, 1080p with Low or Medium settings is required, as 1440p High only achieves 188.2 FPS.

GPU Role

The NVIDIA GeForce RTX 3080 Ti is a powerhouse from the 30-series, built on the Ampere architecture. With 12 GB of GDDR6X memory on a 384-bit bus, it offers a massive 912.4 GB/s of bandwidth. Its boost clock of 1665 MHz and 10240 shading units provide immense compute power, reflected in its 34.10 TFLOPS FP32 performance. The GPU's benchmark scores are equally impressive, with a Passmark G3D score of 26896 and a percentile ranking of 83.

The GPU's role in Barony is clearly demonstrated by the performance at 4K resolution. The jump from 4K Low (156.1 FPS) to 4K High (98.5 FPS) and then to 4K Ultra (71.2 FPS) shows the GPU's raw power being consumed by higher fidelity settings. The 4K Ultra result of 71.2 FPS is a clear indicator that the RTX 3080 Ti, while extremely powerful, is fully utilized at this demanding resolution and settings combination. The data shows that the GPU is the star of the show at higher resolutions, but its full potential is not realized at lower resolutions due to the CPU bottleneck.

Settings Recommendations

The measured data provides a clear picture of the trade-offs between visual quality and frame rate. For players with high refresh rate monitors (144Hz or above), the 1080p resolution with Low settings is the only way to achieve frame rates above 400 FPS. The 419 FPS at 1080p Low is far beyond what most displays can show, making this setting a good choice for competitive play or for reducing input lag, though it offers the lowest visual fidelity.

For a balance of visual quality and performance, 1440p with High settings is a strong candidate. The 188.2 FPS average is well above the 144Hz threshold and offers a significant visual upgrade over 1080p. If a higher visual fidelity is preferred, 1440p Ultra at 137.7 FPS is still playable and will satisfy users with 120Hz or 144Hz displays, though it is closer to the limit. The 4K resolution is only recommended for High settings, which yields 98.5 FPS, as the Ultra setting at 71.2 FPS may not be smooth enough for all players. The data suggests that 1440p High offers the best overall experience, combining high frame rates with good graphical detail.

Measured FPS Breakdown

The following table details the exact average FPS measurements for all tested combinations.

1920x1080:

  • Low: 419 FPS
  • Medium: 351 FPS
  • High: 299 FPS
  • Ultra: 214.9 FPS

2560x1440:

  • Low: 294.1 FPS
  • Medium: 222.4 FPS
  • High: 188.2 FPS
  • Ultra: 137.7 FPS

3840x2160:

  • Low: 156.1 FPS
  • Medium: 112.9 FPS
  • High: 98.5 FPS
  • Ultra: 71.2 FPS

The data reveals a clear pattern: at any given resolution, frame rate decreases as settings increase, and at any given setting, frame rate decreases as resolution increases. The most significant drops occur when moving from 1080p to 1440p, particularly at lower settings, which reinforces the conclusion that the CPU's performance ceiling is being reached. The 4K results show a more uniform scaling, indicating that the GPU's workload is the primary factor at that resolution. For instance, the difference between Low and Ultra at 1080p is 204.1 FPS, while at 4K, the same comparison shows a difference of 84.9 FPS. This suggests the GPU's rendering capabilities become the limiting factor at higher resolutions, whereas the CPU's limitations are more apparent at lower resolutions and settings.

Hardware Specifications

AMD Ryzen 5 2600

Cores / Threads 6 / 12
Base Clock 3400 MHz
Boost Clock 3900 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 3080 Ti

VRAM 12 GB GDDR6X
Base Clock —
Boost Clock 1665 MHz MHz
TDP 350 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 2600 + NVIDIA GeForce RTX 3080 Ti in Barony

Resolution Settings Avg FPS
3840x2160 Low 156.1
3840x2160 Medium 112.9
3840x2160 High 98.5
3840x2160 Ultra 71.2
2560x1440 Low 294.1
2560x1440 Medium 222.4
2560x1440 High 188.2
2560x1440 Ultra 137.7
1920x1080 Low 419.0
1920x1080 Medium 351.0
1920x1080 High 299.0
1920x1080 Ultra 214.9

Barony with Ryzen 5 2600 + Other GPUs

See how Barony performs with the same CPU but different graphics cards.

Barony with RTX 3080 Ti + Other CPUs

See how Barony performs with the same GPU but different processors.

Other Games with Ryzen 5 2600 + RTX 3080 Ti

Explore FPS benchmarks for other games using this same hardware combination.