Archeage

Archeage

AVERAGE FPS
105
good

This combination provides smooth gameplay with an average of 105 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 33 49 72 81
1440p QHD 58 86 126 142
1080p Full HD 87 127 187 210

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 81
3840x2160 Medium 72
3840x2160 High 49
3840x2160 Ultra 33
2560x1440 Low 142
2560x1440 Medium 126
2560x1440 High 86
2560x1440 Ultra 58
1920x1080 Low 210
1920x1080 Medium 187
1920x1080 High 127
1920x1080 Ultra 87

Archeage with Intel Core Ultra 7 265 + AMD Radeon RX 9070 XT, In-Depth Analysis

Archeage, a 2014 MMORPG, is an older title that still sees play, and the data for the Intel Core Ultra 7 265 paired with the AMD Radeon RX 9070 XT shows a system that is heavily dependent on resolution and settings. The measured FPS numbers reveal a configuration that can deliver high refresh rates at 1080p but struggles to maintain smooth play at 4K with maximum graphical fidelity. The results indicate a classic GPU-bound scenario at higher resolutions, while the powerful 20-core processor ensures the game never becomes CPU-limited.

Resolution Scaling

The performance drop from 1080p to 4K is severe, clearly demonstrating that the Radeon RX 9070 XT is the limiting factor as pixel count increases. At High settings, the average frame rate falls from 127 FPS at 1920x1080 to 86 FPS at 2560x1440, and then plummets to 49 FPS at 3840x2160. This represents a 33% performance hit when moving from 1080p to 1440p, and a further 43% drop when moving from 1440p to 4K. The scaling is not linear, with the jump to 4K being particularly punishing.

Looking at the Medium preset, the trend is similar but with a slightly different slope. The system delivers 187 FPS at 1080p, drops to 126 FPS at 1440p (a 33% reduction), and then falls to 72 FPS at 4K (a 43% reduction from 1440p). This shows that the GPU workload scales consistently with resolution, and the RX 9070 XT's capabilities are quickly exhausted at 4K.

The Low preset shows the same pattern, with 210 FPS at 1080p, 142 FPS at 1440p, and 81 FPS at 4K. The fact that even at Low settings the 4K resolution cannot maintain 100 FPS confirms that the GPU is the primary bottleneck at that resolution. The data suggests that for a smooth 4K experience, players would need to significantly lower settings, as even the Low preset only manages 81 FPS.

The Ultra preset is the most demanding, with frame rates that are nearly unplayable at higher resolutions. At 1080p, the Ultra preset averages 87 FPS, but this drops to 58 FPS at 1440p and a very choppy 33 FPS at 4K. The scaling from 1080p to 1440p is a 33% reduction, and from 1440p to 4K is another 43% reduction, mirroring the other presets. This indicates that the game's Ultra settings place an enormous load on the GPU, and the RX 9070 XT is simply not sufficient for 4K Ultra in this title.

GPU Role

The AMD Radeon RX 9070 XT is a powerful graphics card with 16 GB of GDDR6 memory on a 256-bit bus, providing 644.6 GB/s of bandwidth. Its boost clock is rated at 2970 MHz, with a game clock of 2400 MHz. The data shows that this hardware is more than capable of handling Archeage at 1080p and 1440p, but the 4K results highlight its limitations.

The 16 GB VRAM is not likely to be a limiting factor in Archeage, given its age and the fact that the game's graphical demands are modest by modern standards. The frame rate drops from 1440p to 4K are more attributable to the raw compute and fill rate demands of higher resolutions rather than memory capacity. The GPU's 128 ROPs and 256 TMUs are likely being saturated at 4K, especially on the Ultra preset.

The performance delta between settings at the same resolution is substantial. At 1080p, the difference between Low and Ultra is 123 FPS (210 vs 87), indicating that the GPU has plenty of headroom at lower resolutions. However, at 4K, the same settings gap shrinks to 48 FPS (81 vs 33), showing that the GPU is being pushed to its limits and has less relative overhead for higher quality settings.

The GPU's benchmark scores, such as a Passmark G3D score of 26795 and a 3DMark Steel Nomad score of 7260, place it in the 55th percentile of all GPUs. The nearest rivals in the benchmark database are older cards like the AMD Radeon HD 7770M and NVIDIA GeForce GTX 570, which have average scores of 13536 and 13515 respectively. This comparison is based on average benchmark scores, not gaming performance, but it does indicate that the RX 9070 XT is positioned in the mid-range of the database's tracked GPUs.

Settings Recommendations

Based on the measured FPS data, the optimal balance of visual quality and performance for this system depends heavily on the target resolution. For 1080p gaming, the High preset at 127 FPS provides an excellent experience with smooth gameplay and good visuals. The Ultra preset at 87 FPS is also playable and offers the best image quality, but the 40 FPS drop from High may not be worth it for the marginal visual gains.

At 1440p, the High preset at 86 FPS is the clear recommendation. It maintains a frame rate that is above the 60 FPS threshold for smooth play, and the visual quality is solid. The Medium preset offers a higher 126 FPS, which is beneficial for high-refresh-rate monitors, but the visual downgrade from High is noticeable. The Ultra preset at 58 FPS is borderline, dipping below 60 FPS, and is not recommended for a consistently smooth experience.

For 4K, the data suggests that players should stick to the Low preset, which averages 81 FPS. This is the only preset that maintains a comfortable frame rate above 60 FPS at 4K. The Medium preset at 72 FPS is also acceptable, but the High preset at 49 FPS and Ultra at 33 FPS will result in a stuttery and unresponsive experience, especially in a fast-paced MMORPG environment. The Medium preset at 4K offers a reasonable compromise for those who prioritize visual fidelity over a buttery-smooth frame rate.

FAQ

Q: Can this system run Archeage at 4K with maximum settings?

A: No. The data shows the Ultra preset at 3840x2160 averages only 33 FPS, which is not smooth for gameplay. Even the High preset at 4K only manages 49 FPS.

Q: What is the best resolution for high refresh rate gaming with this setup?

A: At 1920x1080, the Low preset achieves 210 FPS and the Medium preset reaches 187 FPS, making it the ideal resolution for high-refresh-rate monitors. The High preset at 127 FPS is also good for 144Hz displays.

Q: How does the CPU's performance compare to its direct rivals?

A: The Intel Core Ultra 7 265 has an average benchmark score of 64640. Its nearest rival, the AMD EPYC 4464P, scores 64823, which is 0.3% higher. The Intel Core Ultra 7 265F scores 64438, which is 0.3% lower, and the AMD EPYC 9124 scores 65104, which is 0.7% higher.

Q: Is the 16 GB of VRAM on the GPU sufficient for this game?

A: Yes, the data suggests it is. The frame rates are limited by the GPU's compute performance at high resolutions, not its memory capacity. The 16 GB of GDDR6 memory is more than enough for a 2014 MMORPG.

Q: What is the performance difference between the High and Ultra presets at 1440p?

A: At 2560x1440, the High preset averages 86 FPS, while the Ultra preset averages 58 FPS. This is a 28 FPS difference, making Ultra about 33% slower than High.

Q: Does the system perform better in this game than the GPU's average benchmark score suggests?

A: The GPU's average benchmark score of 13543 places it in the 55th percentile. In Archeage, the system achieves very playable frame rates at 1080p and 1440p, but struggles at 4K. The game's performance relative to the GPU's overall standing appears to be dependent on resolution.

CPU Role

The Intel Core Ultra 7 265 is a 20-core, 20-thread processor based on the Arrow Lake architecture, manufactured on a 3 nm process by TSMC. It has a base clock of 2.40 GHz and a boost clock of 5.30 GHz, with 30 MB of shared L3 cache. This is a high-end desktop CPU, and its benchmark scores are impressive, with a Cinebench R23 multi-core score of 42216 and a single-core score of 5960.

In the context of Archeage, the data indicates that the CPU is not the bottleneck. The frame rate scaling from 1080p to 4K is consistent with GPU-bound behavior. At 1080p Low, the system achieves 210 FPS, which is a very high frame rate that requires significant CPU processing power to maintain. The fact that the CPU can sustain this indicates it has ample headroom.

The CPU's performance in the Passmark suite further confirms its strength. It scores 49682 in multithreaded tests and 4689 in single-thread tests. Its percentile ranking of 93rd among all CPUs means it is faster than 93% of the processors in the benchmark database. The nearest rivals, such as the AMD EPYC 4464P with a score of 64823 and the AMD EPYC 7343 with 64202, show that the Core Ultra 7 265 is in the same performance tier as high-end server processors.

Given that Archeage is an MMORPG, it may have some CPU-bound scenarios in crowded areas or during large-scale battles. However, the measured FPS data at lower resolutions, where the CPU is more likely to be the limiting factor, shows excellent performance. The system can push well beyond 100 FPS at 1080p, suggesting that even in demanding in-game situations, the 20 cores and 5.30 GHz boost clock of the Core Ultra 7 265 will provide a smooth experience.

Measured FPS Breakdown

The complete set of measured FPS data for Archeage with the Intel Core Ultra 7 265 and AMD Radeon RX 9070 XT is as follows:

1920x1080:

  • Low: Average 210 FPS
  • Medium: Average 187 FPS, with a minimum of 159 FPS and a maximum of 215 FPS
  • High: Average 127 FPS
  • Ultra: Average 87 FPS

2560x1440:

  • Low: Average 142 FPS
  • Medium: Average 126 FPS, with a minimum of 107 FPS and a maximum of 145 FPS
  • High: Average 86 FPS
  • Ultra: Average 58 FPS

3840x2160:

  • Low: Average 81 FPS
  • Medium: Average 72 FPS, with a minimum of 61 FPS and a maximum of 83 FPS
  • High: Average 49 FPS
  • Ultra: Average 33 FPS

The Medium preset is the only one with recorded minimum and maximum FPS values. At 1080p, the minimum is 159 FPS and the maximum is 215 FPS, showing a 56 FPS variance. At 1440p, the variance is 38 FPS (107 to 145), and at 4K, it is 22 FPS (61 to 83). This indicates that the frame pacing is tighter at higher resolutions, where the GPU is more consistently loaded.

The data shows a clear hierarchy of performance across presets and resolutions. The Low preset consistently provides the highest frame rates, followed by Medium, High, and then Ultra. The differences between presets are most pronounced at 1080p, where the GPU has more headroom, and become less significant as the resolution increases and the GPU becomes the primary constraint. The system is well-suited for 1080p and 1440p gaming, but 4K requires significant settings reductions to achieve playable frame rates.

Hardware Specifications

Intel Core Ultra 7 265

Cores / Threads 20 / 20
Base Clock 2400 MHz
Boost Clock 5300 MHz
TDP 65W
Socket Intel Socket 1851
View Full CPU Details →

AMD Radeon RX 9070 XT

VRAM 16 GB GDDR6
Base Clock —
Boost Clock 2970 MHz MHz
TDP 304 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 7 265 + AMD Radeon RX 9070 XT in Archeage

Resolution Settings Avg FPS
3840x2160 Low 81.0
3840x2160 Medium 72.0
3840x2160 High 49.0
3840x2160 Ultra 33.0
2560x1440 Low 142.0
2560x1440 Medium 126.0
2560x1440 High 86.0
2560x1440 Ultra 58.0
1920x1080 Low 210.0
1920x1080 Medium 187.0
1920x1080 High 127.0
1920x1080 Ultra 87.0

Archeage with iUltra 7 265 + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with RX 9070 XT + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with iUltra 7 265 + RX 9070 XT

Explore FPS benchmarks for other games using this same hardware combination.