Archeage

Resolution Scaling

The measured FPS data for Archeage with the Intel Core i7-12700K and NVIDIA GeForce RTX 2060 reveals a clear and dramatic scaling curve as resolution increases. At 1920x1080 with Low settings, the combo delivers 117 FPS average. Moving to 2560x1440 at Low settings drops that to 79 FPS, a reduction of 38 FPS. At 3840x2160 with Low settings, the average falls to 45 FPS, which is less than half of the 1080p result. This steep decline indicates that the GPU is the primary limiting factor at higher resolutions, as the RTX 2060’s 6 GB GDDR6 memory and 336.0 GB/s bandwidth are being saturated by the increased pixel count.

The scaling pattern is consistent across all settings presets. For High settings, the average FPS goes from 71 at 1080p to 48 at 1440p, then down to 27 at 4K. Medium settings show a similar trajectory: 104 at 1080p, 70 at 1440p, and 40 at 4K. Ultra settings are the most demanding, with averages of 48 at 1080p, 33 at 1440p, and just 19 at 4K. The relative drop from 1080p to 4K is roughly 60-70% across all presets, which strongly suggests that the RTX 2060’s compute throughput — 6.451 TFLOPS FP32 — is the bottleneck rather than the CPU.

The CPU’s strong single-thread performance, evidenced by a Cinebench R23 single-core score of 1850.5 and a 3DMark single-thread score of 1043, is more than sufficient for Archeage’s MMO workload. Even at 1080p Low, where the CPU has the least graphics overhead, the 117 FPS average does not indicate a CPU limitation. The data shows that this is a GPU-bound scenario across all measured resolutions. The RTX 2060’s 1920 shading units and 120 TMUs simply run out of headroom as resolution climbs. Users targeting 4K will find the experience marginal, while 1080p remains the sweet spot for this pairing.

FAQ

Q: What is the best resolution for this combo in Archeage?

A: Based on the measured FPS, 1920x1080 is the only resolution where all settings presets achieve playable frame rates. At 1080p, even Ultra settings average 48 FPS, while Low reaches 117 FPS. At 1440p, only Low (79 FPS) and Medium (70 FPS) exceed 60 FPS, and at 4K, all presets fall below 45 FPS.

Q: How does the RTX 2060 compare to its nearest rivals in overall GPU benchmarks?

A: The RTX 2060’s average benchmark score is 15290, placing it in the 58th percentile of all GPUs. Its nearest rival, the NVIDIA GeForce GTX 580, scores 15283 with a deltaPct of 0. The AMD Radeon 680M scores 15270 (0.1% behind), and the NVIDIA GeForce RTX 3050 OEM scores 15199 (0.6% behind). The AMD Radeon RX 7600 scores 15171, which is 0.8% lower.

Q: Is the Core i7-12700K a strong CPU for this game?

A: Yes. The i7-12700K has 12 cores and 20 threads, with a boost clock of 5.00 GHz. Its Cinebench R23 single-core score of 1850.5 and multicore score of 19784 indicate substantial processing power. The 3DMark max-threads score of 9979 further confirms that it can handle demanding CPU workloads without bottlenecking the RTX 2060 in Archeage.

Q: What is the FPS difference between Low and Ultra settings at 1080p?

A: At 1920x1080, Low settings average 117 FPS, while Ultra settings average 48 FPS. This is a difference of 69 FPS, or about 59% lower performance at Ultra. Medium settings sit in between at 104 FPS, and High settings at 71 FPS.

Q: Does the combo rank well among all tested combinations in Archeage?

A: The combo ranks 2928 out of 3708 tested combos for Archeage. This places it in the bottom 21% of all tested configurations, indicating that while it can run the game, many other CPU-GPU pairings deliver higher average frame rates.

Q: Is the RTX 2060’s memory capacity a concern for 4K gaming?

A: The measured data shows that at 3840x2160, even Low settings only average 45 FPS, and Ultra drops to 19 FPS. The 6 GB GDDR6 memory and 192-bit bus width are likely insufficient for 4K textures and geometry in this title, as the performance degradation is severe across all presets.

How This Combo Ranks

In the database of tested CPU-GPU combinations for Archeage, the Intel Core i7-12700K paired with the NVIDIA GeForce RTX 2060 achieves a rank of 2928 out of 3708 combos. This places the pairing in the lower 21% of all tested configurations, which is a notable underperformance given the individual components’ benchmark standings.

The CPU alone sits in the 84th percentile of all CPUs, with an average benchmark score of 35287. Its nearest rivals include the Intel Core i5-13600T (avg score 35305, deltaPct -0.1%), the Intel Core i7-12700KF (35365, -0.2%), and the Intel Core i7-13700T (35403, -0.3%). These rivals are all within 0.4% of the i7-12700K’s average score, indicating that the CPU is performing as expected for its class.

The GPU, however, is the weak link in this pairing. The RTX 2060 has an average benchmark score of 15290, placing it in the 58th percentile of all GPUs. Its nearest rivals are the GTX 580 (15283, 0% delta), the Radeon 680M (15270, 0.1%), the RTX 3050 OEM (15199, 0.6%), and the RX 7600 (15171, 0.8%). These small deltas suggest that the RTX 2060 is competitive with its direct peers, but its overall performance tier is significantly lower than the CPU’s.

The combination of a top-quartile CPU with a mid-range GPU produces a system that is heavily GPU-limited in Archeage. The combo rank of 2928 reflects this imbalance — the CPU has ample headroom, but the GPU cannot translate that into higher frame rates. For context, the rank means that 780 other combos deliver better performance in this specific game. This is not a reflection of the CPU’s capability, but rather the GPU’s inability to keep pace at higher resolutions and settings. Users with this combo should prioritize GPU upgrades to improve their Archeage experience.

Measured FPS Breakdown

The measured FPS data for Archeage with the i7-12700K and RTX 2060 provides a comprehensive view of performance across three resolutions and four settings presets. The data is measured directly rather than estimated, offering reliable insights.

At 1920x1080, the lowest resolution tested, the combo delivers strong performance across the board. With Low settings, the average FPS is 117, which is the highest of any measured configuration. Medium settings reduce this to 104 FPS, with a minimum of 89 FPS and a maximum of 120 FPS. High settings average 71 FPS, and Ultra settings drop to 48 FPS. The spread from 117 to 48 FPS shows that even at 1080p, the Ultra preset imposes a significant performance penalty.

Moving to 2560x1440, the performance declines noticeably. Low settings average 79 FPS, which is still playable but 38 FPS lower than at 1080p. Medium settings average 70 FPS, with a minimum of 60 FPS and a maximum of 81 FPS, maintaining a smooth experience. High settings average 48 FPS, which is borderline for competitive play. Ultra settings fall to 33 FPS, which is below the threshold for comfortable gameplay.

At 3840x2160, the RTX 2060 struggles to maintain playable frame rates. Low settings average 45 FPS, Medium settings average 40 FPS (with a minimum of 34 and maximum of 46), High settings average 27 FPS, and Ultra settings average just 19 FPS. The 4K results are consistently below 60 FPS, and even the best-case scenario at Low settings falls short of smooth performance. The minimum FPS of 34 at 4K Medium indicates that frame pacing can become erratic under load.

The data shows a clear pattern: each step up in resolution costs roughly 30-40% of the average FPS, regardless of the settings preset. This consistency reinforces the conclusion that the GPU is the bottleneck. The RTX 2060’s 6 GB of VRAM and 336.0 GB/s bandwidth are insufficient for 4K gaming in Archeage, and even 1440p requires lowering settings to maintain 60+ FPS.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the target resolution and desired frame rate. At 1920x1080, the Medium preset offers the best balance of visual quality and performance, averaging 104 FPS with a minimum of 89 FPS. This ensures smooth gameplay even in busy MMO scenes. The High preset at 71 FPS is also viable, but the 33 FPS drop from Medium to High is substantial. Ultra at 48 FPS is playable but may cause noticeable stuttering during large-scale battles.

For 2560x1440, the Low preset at 79 FPS is the only option that consistently stays above 60 FPS. Medium at 70 FPS is close, with a minimum of 60 FPS, making it a reasonable choice for players who prioritize visual fidelity over a strict 60 FPS target. High at 48 FPS and Ultra at 33 FPS are not recommended, as they fall below the smoothness threshold for an MMO where fast reaction times matter.

At 3840x2160, no preset achieves a playable frame rate. Low settings average 45 FPS, and Medium averages 40 FPS, both of which are below 60 FPS and may result in a less responsive experience. High at 27 FPS and Ultra at 19 FPS are effectively unplayable. Players with 4K displays should consider lowering the resolution to 1440p or upgrading the GPU.

The data suggests that the best experience for this combo is at 1080p with Medium settings, yielding 104 FPS average and a minimum of 89 FPS. This configuration maximizes performance while retaining moderate visual quality. For players who prefer higher resolutions, 1440p with Low or Medium settings is the pragmatic choice, though the frame rate will not be as consistently high.

CPU Role

The Intel Core i7-12700K is a 12-core, 20-thread processor based on the Alder Lake architecture, built on Intel’s 10 nm process. Its base clock is 3.60 GHz, with a boost clock of 5.00 GHz, and it has a 25 MB shared L3 cache. The CPU supports both DDR4 and DDR5 memory in a dual-channel configuration, and it features 20 PCIe Gen 4 lanes. Its integrated UHD Graphics 770 is present but irrelevant for gaming with a discrete GPU.

In synthetic benchmarks, the i7-12700K demonstrates strong multi-threaded and single-threaded performance. It scores 19784 in Cinebench R23 multicore and 1850.5 in single-core. The Geekbench multicore score is 15790, with a single-core score of 2308. The PassMark multithread score is 34404, and the single-thread score is 4013. These results place the CPU in the 84th percentile of all CPUs, with an average benchmark score of 35287.

For Archeage, an MMORPG that often relies on single-thread performance for game logic and UI rendering, the i7-12700K’s single-core strength is particularly valuable. The 3DMark single-thread score of 1043 and the PassMark single-thread score of 4013 indicate that the CPU can handle the game’s thread-to-thread communication without becoming a bottleneck. The high boost clock of 5.00 GHz also helps maintain consistent frame delivery in CPU-heavy scenarios.

However, the measured FPS data shows that the CPU is not the limiting factor in this pairing. The FPS drops from 1080p to 4K are consistent with a GPU-bound workload, and the CPU’s performance headroom is evident from the fact that even at 1080p Low settings, the average FPS of 117 does not exceed what the RTX 2060 can output. The GPU’s 6.451 TFLOPS FP32 throughput and 201.6 GTexel/s texture rate are the limiting resources.

The i7-12700K’s 125 W TDP and 20 threads provide ample processing power for Archeage’s background tasks, such as asset streaming and network handling, without affecting frame rates. The CPU’s cache hierarchy — 80 KB L1 per core and 1.25 MB L2 per core — reduces memory latency, which is beneficial for MMO environments with many concurrent players. In summary, the CPU is more than adequate for this game, and any performance issues in Archeage should be attributed to the RTX 2060 rather than the i7-12700K.