Archeage

Resolution Scaling

The measured FPS data for Archeage with this Intel Core i7-12700K and AMD Radeon RX 9060 combination reveals a steep performance cliff as resolution increases. At 1080p Low settings, the combo delivers 142 FPS average, but at 4K Ultra, it drops to just 23 FPS. This represents a massive 84% reduction in frame rate from the lowest-stress scenario to the highest-stress scenario tested. The scaling pattern is consistent across all settings presets: moving from 1920x1080 to 2560x1440 reduces performance by roughly 33-39%, and the jump from 1440p to 4K cuts frame rates nearly in half again.

The data indicates that at 1080p, this system is heavily CPU-limited in Archeage. The 142 FPS at Low settings versus 86 FPS at High settings shows only a 39% drop from lowering graphical quality, which is modest compared to the resolution scaling. However, at 4K, the GPU becomes the dominant constraint. The 4K Low result of 55 FPS versus the 4K Ultra result of 23 FPS demonstrates a 58% performance swing purely from settings changes, pointing to the Radeon RX 9060's limitations at extreme resolutions.

The Medium preset provides the most complete data, with min and max FPS recorded at every resolution. At 1080p Medium, the system averages 126 FPS with a range of 107-145 FPS. At 1440p Medium, the average drops to 85 FPS with a 72-98 FPS range. At 4K Medium, the average falls to 49 FPS with a 41-56 FPS range. This 2.6x scaling from 1080p to 4K on the same settings preset confirms that pixel throughput is the primary bottleneck at higher resolutions, while the CPU maintains enough headroom to keep frame pacing stable.

The Ultra preset shows the most dramatic resolution sensitivity. The 1080p Ultra result of 58 FPS is playable, but 1440p Ultra drops to 39 FPS, and 4K Ultra becomes nearly unplayable at 23 FPS. This suggests that Ultra settings in Archeage introduce GPU-heavy effects that scale poorly with resolution on this hardware. The gap between Low and Ultra at each resolution widens as resolution increases: 2.6x at 1080p, 2.4x at 1440p, and 2.4x at 4K. This consistent multiplier indicates that the GPU's fill rate and memory bandwidth are the limiting factors when pushing high pixel counts.

FAQ

Q: What is the best resolution to play Archeage with this hardware combo?

A: Based on the measured data, 1920x1080 is the only resolution where all settings presets remain above 58 FPS. At 1440p, only Low and Medium settings stay above 85 FPS, while High drops to 58 FPS and Ultra falls to 39 FPS. At 4K, even Low settings only reach 55 FPS.

Q: How does the Ultra preset compare to High at the same resolution?

A: At 1080p, Ultra delivers 58 FPS versus High's 86 FPS, a 33% reduction. At 1440p, Ultra drops to 39 FPS from High's 58 FPS, also a 33% reduction. At 4K, Ultra falls to 23 FPS from High's 33 FPS, a 30% reduction. The consistency of this penalty suggests Ultra adds a fixed-cost rendering load.

Q: Is the Radeon RX 9060 capable of 4K gaming in Archeage?

A: The data shows 4K performance is marginal at best. Low settings achieve 55 FPS, Medium drops to 49 FPS, High falls to 33 FPS, and Ultra bottoms out at 23 FPS. For smooth 4K play, only Low settings approach acceptable frame rates, and even then, the 55 FPS average leaves little headroom for demanding scenes.

Q: Which setting preset offers the best balance of quality and performance at 1440p?

A: At 2560x1440, Medium settings provide 85 FPS average with a 72-98 FPS range, while High settings drop to 58 FPS. Given that Medium maintains frame rates above 72 FPS even in minimum scenarios, it is the recommended preset for this resolution based purely on the measured frame time consistency.

Q: How does this combo rank among all tested configurations for Archeage?

A: The combination ranks 1603 out of 2761 tested combos, placing it in roughly the 42nd percentile of all system configurations. This mid-pack ranking reflects the GPU's 59th percentile standing among all GPUs, while the CPU sits in the 84th percentile among all CPUs.

Q: What do the benchmark scores suggest about this system's overall capability?

A: The CPU achieves an average benchmark score of 35287, while the GPU averages 16014. The GPU's nearest rival, the NVIDIA GeForce RTX 3060 Ti, scores 16129, just 0.7% higher. The CPU's nearest rival, the Intel Core i5-13600T, scores 35305, which is 0.1% lower.

GPU Role

The AMD Radeon RX 9060 serves as the primary rendering engine in this configuration, and its specifications directly influence Archeage's performance characteristics. The GPU features 8 GB of GDDR6 memory on a 128-bit bus, providing 288.0 GB/s of bandwidth. This memory configuration is adequate for 1080p and 1440p gaming but becomes a constraint at 4K, where the measured FPS drops below 55 even at Low settings. The 8 GB capacity is sufficient for the tested settings, as the data does not indicate texture thrashing, but the narrow 128-bit bus limits effective throughput at higher resolutions.

The GPU's clock behavior shows a significant boost range: base clock of 1700 MHz, game clock of 2400 MHz, and boost clock of 2990 MHz. This 76% boost potential allows the card to scale performance dynamically based on thermal and power headroom. The 21.43 TFLOPS FP32 compute throughput provides ample raw processing power for the game's shader workloads. With 1792 shading units, 112 texture mapping units, and 64 render output units, the card delivers a pixel rate of 191.4 GPixel/s and a texture rate of 334.9 GTexel/s.

The GPU's benchmark results place it in the 59th percentile of all GPUs, with an average benchmark score of 16014. Its nearest rivals include the NVIDIA GeForce RTX 3060 Ti (scoring 16129, 0.7% higher), the AMD Radeon R9 370X (scoring 15862, 1% lower), and the AMD Radeon RX 7700 (scoring 15852, 1% lower). These close margins indicate that the RX 9060 sits in a competitive performance tier. The 3DMark Steel Nomad DX12 score of 3322 reflects modern API performance, while the Geekbench OpenCL score of 88183 and Vulkan score of 39476 suggest strong compute capabilities.

In Archeage specifically, the GPU becomes the limiting factor at 4K resolution. The 4K Ultra result of 23 FPS versus 1080p Ultra's 58 FPS shows a 60% performance loss from resolution scaling alone. This aligns with the GPU's memory bandwidth constraints. The RDNA 4.0 architecture on TSMC's 4 nm process node provides power efficiency, with a 132 W TDP requiring only a single 8-pin power connector and a 300 W suggested PSU. The PCIe 5.0 x16 interface ensures sufficient bandwidth for CPU-GPU communication, though Archeage's workload likely doesn't saturate even PCIe 4.0.

Measured FPS Breakdown

At 1920x1080, the system delivers its strongest performance across all settings. Low settings achieve 142 FPS average, representing the highest measured frame rate in the entire dataset. Medium settings maintain 126 FPS with a 107-145 FPS range, showing tight frame pacing. High settings drop to 86 FPS, while Ultra falls to 58 FPS. The 1080p results show that this combo can drive high refresh rate monitors at Low and Medium settings, with the 142 FPS and 126 FPS averages respectively exceeding 120 Hz thresholds.

Moving to 2560x1440, performance scales predictably downward. Low settings still deliver 95 FPS, which remains smooth for most displays. Medium settings provide 85 FPS average with a 72-98 FPS range, indicating occasional dips below 75 FPS but generally stable performance. High settings drop to 58 FPS, and Ultra falls to 39 FPS. The 1440p results suggest that Medium is the ceiling for consistently smooth gameplay, as High's 58 FPS average may feel less responsive during busy MMO encounters.

At 3840x2160, the system struggles to maintain playable frame rates. Low settings achieve 55 FPS, which is the only 4K preset above 50 FPS. Medium settings drop to 49 FPS with a 41-56 FPS range, showing significant frame time variance. High settings fall to 33 FPS, and Ultra bottoms out at 23 FPS. The 4K results indicate that this GPU is not suited for high-fidelity 4K gaming in Archeage, with even Low settings hovering near the edge of acceptable smoothness.

The complete dataset reveals a clear hierarchy: 1080p Low (142 FPS) > 1080p Medium (126 FPS) > 1440p Low (95 FPS) > 1080p High (86 FPS) > 1440p Medium (85 FPS) > 1080p Ultra (58 FPS) = 1440p High (58 FPS) > 4K Low (55 FPS) > 4K Medium (49 FPS) > 1440p Ultra (39 FPS) > 4K High (33 FPS) > 4K Ultra (23 FPS). Interestingly, 1080p Ultra and 1440p High both average exactly 58 FPS, suggesting that the GPU workload is similar between these two configurations.

How This Combo Ranks

The combination of Intel Core i7-12700K and AMD Radeon RX 9060 ranks 1603 out of 2761 tested combos in Archeage, placing it in the 58th percentile of all system configurations. This mid-pack ranking is somewhat surprising given the CPU's strong 84th percentile standing. The GPU's 59th percentile position appears to be the limiting factor for the overall ranking, as the system's performance is constrained by the graphics card at higher resolutions.

The CPU's nearest rivals provide context for its contribution to this ranking. The Intel Core i5-13600T scores 35305, a 0.1% delta from the i7-12700K's 35287. The Intel Core i7-12700KF scores 35365, 0.2% higher. The Intel Core i7-13700T scores 35403, 0.3% higher. These tiny deltas indicate that the i7-12700K is performance-competitive with newer and similarly positioned processors, meaning the CPU is not the bottleneck in this combo's ranking.

The GPU's nearest rivals show a wider spread. The NVIDIA GeForce RTX 3060 Ti scores 16129, 0.7% higher than the RX 9060's 16014. The AMD Radeon R9 370X and RX 7700 both score lower, at 15862 and 15852, representing 1% deltas. The AMD Radeon Pro W5500 scores 15679, 2.1% lower. This competitive positioning suggests that the RX 9060's 59th percentile rank is appropriate, and the combo's overall 1603rd rank out of 2761 reflects a balanced but not exceptional system.

The rank of 1603 out of 2761 means there are 1158 combos ranked above this configuration and 1602 below it. This places the system in the upper-middle range of tested hardware combinations. For an MMORPG like Archeage, this ranking suggests the system can handle the game at medium quality settings across most resolutions, but high-end configurations with more powerful GPUs will achieve significantly better frame rates, particularly at 4K.

CPU Role

The Intel Core i7-12700K serves as the central processing unit in this combination, bringing substantial multi-threading capabilities to Archeage. With 12 cores and 20 threads, the processor provides ample parallel processing power for MMO workloads that often involve many concurrent entities and physics calculations. The base clock of 3.60 GHz boosts up to 5.00 GHz, allowing strong single-thread performance when needed. The 25 MB shared L3 cache and 1.25 MB per-core L2 cache provide efficient data access for game logic.

The CPU's benchmark results demonstrate its capabilities. The Cinebench R23 multicore score of 19784 and single-core score of 1850.5 show strong balanced performance. Geekbench multicore and single-core scores of 15790 and 2308 respectively confirm this trend. The 3DMark multi-threaded tests show scaling from 2065 at 2 threads to 9979 at max threads, indicating efficient thread utilization. PassMark single-thread score of 4013 and multithread score of 34404 further validate the CPU's capability.

In Archeage, the CPU's role is most evident at lower resolutions and settings. The 1080p Low result of 142 FPS approaches the practical limit for this game engine, suggesting that CPU overhead begins to constrain performance at very high frame rates. The 84th percentile ranking among all CPUs confirms that the i7-12700K is well above average, and its nearest rivals (i5-13600T, i7-12700KF, i7-13700T) all score within 0.3% of each other, indicating a tight performance cluster.

The CPU's 125 W TDP and LGA 1700 socket compatibility make it a mainstream desktop processor from the Alder Lake architecture. Its hybrid design supports DDR4 and DDR5 memory on a dual-channel bus, though the memory type's impact on Archeage performance is not directly measured in this dataset. The integrated UHD Graphics 770 provides a fallback display output but plays no role in gaming performance with the discrete GPU installed. The CPU's launch MSRP was $409, and it supports PCIe Gen 4 with 20 lanes for GPU and storage connectivity.

The data suggests that the CPU is rarely the limiting factor in this combo's Archeage performance. Even at 1080p Low with 142 FPS, the frame rate remains below what would indicate CPU saturation. The more likely scenario is that the game engine itself or the GPU's rendering pipeline becomes the constraint at higher settings. The CPU's strong multi-threaded performance (Cinebench R20 multicore score of 12229, PassMark multithread score of 34404) ensures that background tasks and game server communication do not introduce stutters, as evidenced by the tight min-max FPS ranges at 1080p and 1440p Medium settings.