Archeage

The Intel Core i5-12400 paired with the NVIDIA GeForce RTX 3070 Ti delivers a solid 1080p and 1440p experience in Archeage, but the data reveals a sharp drop-off at 4K that signals a GPU-bound ceiling. The measured frames per second (FPS) across resolutions show a clear pattern: this combination excels at high-refresh-rate gaming on standard monitors but struggles to maintain playable performance at Ultra settings on 4K displays.

Resolution Scaling

The FPS scaling from 1080p to 4K is steep and consistent across all settings presets. At Low settings, the average FPS falls from 180.9 at 1920x1080 to 120.5 at 2560x1440, then drops dramatically to 69.3 at 3840x2160. That represents a 33% reduction from 1080p to 1440p, followed by a 43% further reduction from 1440p to 4K. The scaling pattern indicates the RTX 3070 Ti is the primary limiting factor at higher resolutions, as the frame rate drops far more than would be expected if the CPU were the bottleneck.

At Medium settings, the same trend holds: 161.6 FPS at 1080p, 109.6 FPS at 1440p, and 63.7 FPS at 4K. The High preset shows 108.5 FPS at 1080p, 73.7 FPS at 1440p, and 42.3 FPS at 4K. The Ultra preset is the most demanding, yielding 72.6 FPS at 1080p, 48.1 FPS at 1440p, and just 30.9 FPS at 4K. The gap between 1440p and 4K widens as settings increase, with the Ultra preset losing 36% of its frame rate when moving from 1440p to 4K.

The data suggests that at 1080p, the CPU has more headroom, as even the Ultra preset maintains 72.6 FPS, which is above the 60 FPS threshold for smooth gameplay. At 1440p, the GPU begins to show its limits on Ultra, but High and below remain comfortable. At 4K, only Low settings break the 60 FPS barrier, and the Ultra preset falls to nearly half that, indicating the 8 GB VRAM and the GPU's compute capacity are stretched thin.

Settings Recommendations

For 1080p displays, the data supports using High settings as the sweet spot. The High preset delivers 108.5 FPS, which is comfortably above 100 FPS for smooth motion, while the Ultra preset drops to 72.6 FPS — still playable but with a significant 33% performance penalty for visual gains that may not be noticeable in a fast-paced MMORPG. Medium settings at 161.6 FPS offer headroom for competitive play, but the jump to High is the better balance of fidelity and speed.

At 1440p, the recommendation shifts to Medium or High. Medium delivers 109.6 FPS, which is excellent for a 144Hz monitor, while High still provides 73.7 FPS, which is above the 60 FPS standard. The Ultra preset at 48.1 FPS is below 60 and may introduce noticeable stutter in crowded areas, so it is best avoided unless visual quality takes absolute priority. Low at 120.5 FPS is an option for competitive play, but the visual downgrade is substantial for only a 10% gain over Medium.

For 4K, the measured data is less forgiving. Low settings at 69.3 FPS is the only preset that maintains a playable frame rate, though it sacrifices most visual fidelity. Medium at 63.7 FPS is borderline, and High at 42.3 FPS or Ultra at 30.9 FPS are not recommended for consistent gameplay. If 4K is a requirement, the data indicates that this combination is better suited to Low or Medium settings, and users should expect to cap frame rates to avoid dips.

GPU Role

The NVIDIA GeForce RTX 3070 Ti is built on the Ampere architecture with 8 GB of GDDR6X memory on a 256-bit bus, providing a memory bandwidth of 608.3 GB/s. The GPU features 6144 shading units, 192 texture mapping units, and 96 render output units, with boost clocks reaching 1770 MHz. These specifications explain why the card handles 1080p and 1440p so effectively, but the 8 GB VRAM capacity becomes a limiting factor at 4K with higher settings, where texture and geometry data exceed the available memory.

The GPU's benchmark scores reinforce its mid-high tier positioning. It achieves a passmark G3D score of 23356 and a passmark GPU compute score of 11601, placing it in the 74th percentile of all GPUs. In DirectX 12 workloads, it scores 91 in passmark, while DirectX 11 yields 192, indicating the card is well-optimized for modern APIs. The 21.75 TFLOPS of FP32 compute is substantial, but the 4K Ultra result of 30.9 FPS shows that raw compute is not enough to overcome memory bandwidth or capacity constraints in this title.

The GPU's nearest rivals by average benchmark score include the AMD Radeon RX 590 GME (0.3% higher), the AMD Radeon RX 6700 (0.8% lower), the NVIDIA Quadro M5000 (0.9% lower), and the NVIDIA GRID M60-1Q (1.2% lower). These small deltas indicate that the RTX 3070 Ti sits in a tightly contested performance band, but its real-world advantage in this game comes from its driver optimization and memory subsystem, which are reflected in the measured FPS data.

FAQ

Q: Can this combo run Archeage at 4K with playable frame rates?

A: Yes, but only at Low settings, which average 69.3 FPS. Medium settings drop to 63.7 FPS, while High and Ultra fall to 42.3 FPS and 30.9 FPS, respectively, making them less suitable for consistent play.

Q: What is the best settings preset for 1440p gaming?

A: Medium settings provide 109.6 FPS, which is ideal for high-refresh-rate monitors. High settings at 73.7 FPS are also viable if visual quality is prioritized, but Ultra at 48.1 FPS falls below the 60 FPS threshold.

Q: How does the RTX 3070 Ti compare to its closest rivals in synthetic benchmarks?

A: The GPU scores 23356 in passmark G3D, with the AMD Radeon RX 590 GME 0.3% higher, the AMD Radeon RX 6700 0.8% lower, the NVIDIA Quadro M5000 0.9% lower, and the NVIDIA GRID M60-1Q 1.2% lower.

Q: Does the CPU bottleneck the GPU at any resolution?

A: At 1080p Low, the 180.9 FPS result suggests the CPU can keep up with the GPU's output. The consistent scaling down to 4K indicates the GPU becomes the primary limiter at higher resolutions, while the CPU maintains sufficient performance.

Q: Is the 8 GB VRAM sufficient for Archeage?

A: The data shows playable frame rates at 1080p and 1440p across all settings, indicating 8 GB is enough for those resolutions. At 4K, the severe frame rate drops on High and Ultra suggest VRAM capacity or bandwidth may be insufficient for maximum settings.

Q: What is the combo's overall ranking among tested systems?

A: This combination ranks 687 out of 1727 tested combos in Archeage, placing it in the top 40% of all systems tested.

How This Combo Ranks

The Intel Core i5-12400 and NVIDIA GeForce RTX 3070 Ti combination ranks 687 out of 1727 tested combos in Archeage, which places it in the 60th percentile of all systems measured. This ranking reflects a balanced pairing where the CPU's single-thread and multi-thread capabilities complement the GPU's rasterization performance. The CPU achieves an average benchmark score of 19850, with a 3DMark max threads score of 5890 and a single-thread score of 910, indicating strong per-core performance that suits MMORPGs like Archeage, which often rely on single-threaded game logic.

The ranking is consistent with the measured FPS data: the combo performs well at 1080p and 1440p, but falls below top-tier systems at 4K Ultra. Systems in higher ranks likely feature GPUs with more VRAM or higher memory bandwidth, or CPUs with higher boost clocks, but the data does not specify those configurations. The 687th position out of 1727 puts this combo ahead of the majority of tested systems, making it a capable choice for mainstream gaming at standard resolutions.

CPU Role

The Intel Core i5-12400 is a 6-core, 12-thread processor based on the Alder Lake architecture, with a base clock of 2.50 GHz and a boost clock of 4.40 GHz. It has 18 MB of shared L3 cache and supports dual-channel DDR4 and DDR5 memory, with a TDP of 65 W. In synthetic benchmarks, it scores 15935 in Cinebench R23 multi-core and 2249 in single-core, with a 3DMark single-thread score of 910 and a max threads score of 5890. These figures place the CPU in the 77th percentile of all CPUs, with an average benchmark score of 19850.

The CPU's nearest rivals include the Intel Core i7-9700 (0.1% higher score), the Intel Core i7-8700 (0.2% lower), the AMD Ryzen Threadripper PRO 5995WX (0.4% lower), and the Intel Core i5-11600K (0.4% higher). This tight grouping shows the i5-12400 is competitive with older i7 parts, and its 6-core/12-thread configuration provides ample parallelism for Archeage, which likely benefits from multiple threads for rendering and physics.

In the measured FPS data, the CPU's role is evident at 1080p Low, where the 180.9 FPS result suggests the CPU can feed the GPU efficiently. At 1080p Ultra, the 72.6 FPS result indicates the CPU handles the increased draw calls without becoming a bottleneck, as the frame rate scales predictably with resolution. The boost clock of 4.40 GHz provides the single-thread performance needed for MMO game logic, while the 12 threads handle background tasks and asset streaming, contributing to the stable frame rates observed across all settings.