Archeage

Archeage

AVERAGE FPS
91
good

This combination provides smooth gameplay with an average of 91 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 28 45 63 72
1440p QHD 48 76 112 121
1080p Full HD 75 112 161 178

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 72
3840x2160 Medium 63
3840x2160 High 45
3840x2160 Ultra 28
2560x1440 Low 121
2560x1440 Medium 112
2560x1440 High 76
2560x1440 Ultra 48
1920x1080 Low 178
1920x1080 Medium 161
1920x1080 High 112
1920x1080 Ultra 75

Archeage with AMD Ryzen 5 4600G + NVIDIA GeForce RTX 3070 Ti, In-Depth Analysis

The AMD Ryzen 5 4600G paired with the NVIDIA GeForce RTX 3070 Ti lands at rank 677 out of 1,727 tested combos in Archeage, placing it in the upper-middle tier of the database. This is a solid position for a 2014 MMORPG, but the data reveals a config that is heavily GPU-bound at higher resolutions while leaving performance on the table at 1080p due to the CPU’s Zen 2 architecture. The measured FPS across all settings and resolutions shows a clear pattern: the RTX 3070 Ti can push very high frame rates at 1440p and 1080p, but the Ryzen 5 4600G’s six cores and 12 threads become the limiting factor at lower resolutions, particularly in a game like Archeage where massive player populations can stress single-thread performance.

How This Combo Ranks

The combo’s rank of 677 out of 1,727 tested combinations means it sits above roughly 61% of all configurations in the database for Archeage. That is respectable, but not elite. The Ryzen 5 4600G itself holds a percentile of 75 against all CPUs, with an average benchmark score of 17,489. Its nearest rivals include the AMD Ryzen 3 PRO 5355GE (avg score 17,482, delta 0%), Intel Core i5-12450H (17,475, +0.1%), Intel Core i3-14100T (17,636, -0.8%), and Intel Core i3-13100F (17,665, -1%). The CPU is essentially tied with these chips in synthetic workloads, with deltas under 1%. The RTX 3070 Ti, meanwhile, holds a percentile of 74 against all GPUs, with an average benchmark score of 30,849. Its nearest rivals are the AMD Radeon RX 590 GME (30,755, +0.3%), AMD Radeon RX 6700 (31,112, -0.8%), NVIDIA Quadro M5000 (31,142, -0.9%), and NVIDIA GRID M60-1Q (31,220, -1.2%). The GPU is also within 1.2% of its closest competitors in raw compute, meaning the combo’s in-game rank is more about how these two parts interact with Archeage’s engine than about any single component being a standout.

In game, the rank is lower than the individual component percentiles might suggest. That gap points to a bottleneck: the CPU’s single-thread score of 726 in 3DMark and 1,919 in Cinebench R23 single-core is adequate, but Archeage’s engine is known to be sensitive to per-core performance. The data shows that at 1080p Low, the combo hits 178.2 FPS, which is far above the 60 FPS target, but at 1080p Ultra it drops to 75.2 FPS, a 57.8% reduction. That scaling is not purely GPU-driven; it reflects the CPU struggling to feed the GPU at higher settings where draw calls increase. Compared to the average combo, this pairing is competitive but not dominant, and users with newer CPUs like the Intel Core i3-13100F (which has a 1% higher avg score) would likely see better frame pacing in crowded zones.

GPU Role

The NVIDIA GeForce RTX 3070 Ti is built on the Ampere architecture with the GA104 chip, fabricated on Samsung’s 8 nm process with 17,400 million transistors on a 392 mm² die. It features 6,144 shading units, 192 texture mapping units, and 96 ROPs, along with 48 RT cores and 192 tensor cores. The GPU’s base clock is 1,575 MHz with a boost clock of 1,770 MHz, and its memory runs at 1,188 MHz, translating to 19 Gbps effective. The 8 GB of GDDR6X memory sits on a 256-bit bus, delivering 608.3 GB/s of bandwidth. For a game released in 2014, this is an enormous amount of memory bandwidth; Archeage’s textures and geometry are not demanding by modern standards, but the bandwidth helps at 4K where the GPU’s pixel rate of 169.9 GPixel/s and texture rate of 339.8 GTexel/s come into play. The FP32 throughput is 21.75 TFLOPS, which is identical to FP16 (1:1), indicating a compute-heavy design that excels at raw rasterization.

In Archeage, the GPU’s role is most evident in the 4K results. At 4K Ultra, the combo averages 27.5 FPS, which is barely playable, while at 4K High it reaches 45.2 FPS and at 4K Medium 62.5 FPS. The jump from 4K Ultra to 4K High is a 64.4% improvement in frame rate, showing that Ultra settings place an extreme load on the GPU’s shading units and memory. The 8 GB VRAM is sufficient for this game, as Archeage does not have the massive texture packs of modern AAA titles, but the GDDR6X’s 608.3 GB/s bandwidth ensures that even at 4K, memory is not the bottleneck. The GPU’s 74th percentile rank means it outperforms roughly three-quarters of all GPUs, but in this game, it is held back by the CPU at lower resolutions. At 1080p Low, the GPU is likely idle much of the time, as the 178.2 FPS figure is closer to what the CPU can produce than what the GPU can render.

Resolution Scaling

The measured FPS data shows a clear pattern of diminishing returns as resolution increases, but with a twist: the drop from 1080p to 1440p is moderate, while the drop from 1440p to 4K is severe at higher settings. At Low settings, the combo delivers 178.2 FPS at 1080p, 120.5 FPS at 1440p, and 72 FPS at 4K. That is a 32.4% drop from 1080p to 1440p and a 40.2% drop from 1440p to 4K. At Medium settings, the figures are 160.6 FPS, 111.8 FPS, and 62.5 FPS respectively, with drops of 30.4% and 44.1%. At High settings, 111.5 FPS at 1080p falls to 75.8 FPS at 1440p (a 32% drop) and then to 45.2 FPS at 4K (a 40.4% drop). At Ultra, the pattern breaks: 75.2 FPS at 1080p drops to 48.3 FPS at 1440p (35.8% drop) and then to 27.5 FPS at 4K (43.1% drop).

These numbers indicate that the RTX 3070 Ti becomes the primary limiting factor at 4K, especially at Ultra where the frame rate falls below 30 FPS. The GPU’s 8 GB VRAM and 608.3 GB/s bandwidth are not enough to maintain smooth performance at 4K Ultra in this engine, likely due to the high shading load. At 1080p, the CPU is the bottleneck: the difference between 1080p Low (178.2 FPS) and 1080p Ultra (75.2 FPS) is 103 FPS, which is a 57.8% reduction, but the GPU is capable of much more. The Ryzen 5 4600G’s base clock of 3.70 GHz and boost of 4.20 GHz, combined with its 8 MB of shared L3 cache, limits how many draw calls it can process per frame. A faster CPU with higher single-thread performance would likely push 1080p Ultra above 100 FPS, but this combo caps out at 75.2 FPS.

FAQ

Q: Is the Ryzen 5 4600G a bottleneck for the RTX 3070 Ti in Archeage?

A: Yes, at 1080p. The data shows 178.2 FPS at 1080p Low, which is high, but the CPU’s single-thread score of 726 in 3DMark and 1,919 in Cinebench R23 limits higher settings. At 1080p Ultra, the combo only reaches 75.2 FPS, a 57.8% drop from Low, indicating the CPU cannot feed the GPU fast enough.

Q: What is the best resolution for this combo in Archeage?

A: 1440p is the sweet spot. At 1440p High, the combo averages 75.8 FPS, which is smooth for an MMORPG, while 1440p Medium hits 111.8 FPS. 4K is playable only at Low (72 FPS) or Medium (62.5 FPS), but High drops to 45.2 FPS and Ultra to 27.5 FPS.

Q: How does the RTX 3070 Ti compare to its nearest rivals in synthetic benchmarks?

A: The GPU’s average benchmark score is 30,849, which is 0.3% higher than the AMD Radeon RX 590 GME (30,755) and 0.8% lower than the AMD Radeon RX 6700 (31,112). It also trails the NVIDIA Quadro M5000 by 0.9% and the NVIDIA GRID M60-1Q by 1.2%.

Q: Does the CPU’s integrated graphics affect gaming performance?

A: No. The Ryzen 5 4600G includes Radeon Vega 7 integrated graphics, but the RTX 3070 Ti is a discrete GPU, so the iGPU is not used in this configuration. The CPU’s performance is what matters, and its multi-thread score of 13,593 in Cinebench R23 shows adequate throughput.

Q: Why does the frame rate drop so much from 1080p to 4K at Ultra settings?

A: The RTX 3070 Ti’s 8 GB VRAM and 608.3 GB/s bandwidth are stressed at 4K Ultra, where the shading load is extreme. The combo drops from 75.2 FPS at 1080p Ultra to 27.5 FPS at 4K Ultra, a 63.4% reduction, which suggests the GPU is the limiting factor at that resolution.

Q: What is the combo’s overall rank in Archeage?

A: The combo ranks 677 out of 1,727 tested combinations, placing it in the 61st percentile of all tested configs. The CPU’s 75th percentile and GPU’s 74th percentile are higher than the combo rank, indicating a suboptimal pairing for this specific game.

CPU Role

The AMD Ryzen 5 4600G is a Zen 2 (Renoir) processor with 6 cores and 12 threads, built on TSMC’s 7 nm process with 9,800 million transistors on a 156 mm² die. Its base clock is 3.70 GHz with a boost clock of 4.20 GHz, and it has a 65 W TDP. The cache layout consists of 64 KB L1 per core, 512 KB L2 per core, and 8 MB of shared L3 cache, which is modest for a modern CPU. Memory support is DDR4 with dual-channel access, providing 51.2 GB/s of bandwidth. The CPU’s benchmarks show a single-thread score of 726 in 3DMark, 1,919 in Cinebench R23, and 1,575 in Geekbench, while multi-thread scores are 4,889 in 3DMark max threads, 13,593 in Cinebench R23, and 6,093 in Geekbench. The PassMark single-thread score is 2,653, and multi-thread is 15,992.

In Archeage, the CPU’s role is to process game logic, NPC AI, and player positions, especially in crowded areas. The data shows that at 1080p Low, the combo hits 178.2 FPS, but at 1080p Ultra, it drops to 75.2 FPS. This 103 FPS gap is not due to GPU load alone; the CPU’s single-thread performance is the bottleneck. The Ryzen 5 4600G’s nearest rival, the Intel Core i3-13100F, has a 1% higher average score, which would likely translate to better frame rates in CPU-bound scenarios. The CPU’s 75th percentile rank means it is better than most, but its L3 cache of 8 MB is small compared to modern chips, which can hurt in games with large working sets. The base clock of 3.70 GHz is also lower than many rivals, but the boost to 4.20 GHz helps. For an MMORPG that relies on consistent frame times, the CPU’s 12 threads are useful for background tasks, but the single-core performance is what determines peak FPS.

Settings Recommendations

Based on the measured FPS data, the best experience is a balance between visual quality and frame rate. At 1080p, High settings deliver 111.5 FPS, which is excellent for an MMORPG, and Medium hits 160.6 FPS for those who prioritize smoothness. Ultra at 1080p drops to 75.2 FPS, which is still playable but not ideal for fast-paced combat. At 1440p, High is the best choice at

Hardware Specifications

AMD Ryzen 5 4600G

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 4200 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 3070 Ti

VRAM 8 GB GDDR6X
Base Clock —
Boost Clock 1770 MHz MHz
TDP 290 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 4600G + NVIDIA GeForce RTX 3070 Ti in Archeage

Resolution Settings Avg FPS
3840x2160 Low 72.0
3840x2160 Medium 62.5
3840x2160 High 45.2
3840x2160 Ultra 27.5
2560x1440 Low 120.5
2560x1440 Medium 111.8
2560x1440 High 75.8
2560x1440 Ultra 48.3
1920x1080 Low 178.2
1920x1080 Medium 160.6
1920x1080 High 111.5
1920x1080 Ultra 75.2

Archeage with Ryzen 5 4600G + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with RTX 3070 Ti + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with Ryzen 5 4600G + RTX 3070 Ti

Explore FPS benchmarks for other games using this same hardware combination.