Archeage

Archeage

AVERAGE FPS
50
playable

This combination offers playable performance with an average of 50 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 17 24 34 40
1440p QHD 30 43 58 70
1080p Full HD 39 59 88 104

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 40
3840x2160 Medium 34
3840x2160 High 24
3840x2160 Ultra 17
2560x1440 Low 70
2560x1440 Medium 58
2560x1440 High 43
2560x1440 Ultra 30
1920x1080 Low 104
1920x1080 Medium 88
1920x1080 High 59
1920x1080 Ultra 39

Archeage with Intel Core i3-12100F + NVIDIA GeForce GTX 1660 Ti, In-Depth Analysis

The Intel Core i3-12100F and NVIDIA GeForce GTX 1660 Ti pairing in Archeage delivers a playable experience at lower resolutions, but the data shows a sharp performance cliff as resolution increases and settings climb. This combination ranks 1494th out of 1727 tested combos in Archeage, placing it in the lower tier of systems measured for this MMORPG. The measured frames per second across twelve configurations reveal a system that can handle 1080p gaming comfortably but struggles to maintain fluid motion at 4K, particularly under heavier graphical loads. The following analysis breaks down how resolution scaling, CPU characteristics, and settings presets interact to define this combo's performance profile.

Resolution Scaling

The measured FPS data shows a consistent and predictable drop as resolution increases from 1920x1080 to 3840x2160, but the magnitude of that drop varies significantly depending on the settings preset. At Low settings, the average frame rate falls from 103.5 FPS at 1080p to 70.2 FPS at 1440p, then to 40.2 FPS at 4K. That represents a 32% reduction from 1080p to 1440p and a further 43% reduction from 1440p to 4K. The system loses roughly 61% of its 1080p Low performance when pushed to 4K Low, indicating that the GPU is becoming the limiting factor as pixel count rises.

The Medium preset tells a similar story with slightly lower absolute numbers. The average FPS at 1080p Medium is 87.6, which drops to 57.5 at 1440p and then to 33.7 at 4K. The percentage drops are comparable to Low settings, with a 34% decrease from 1080p to 1440p and a 41% decrease from 1440p to 4K. This consistency suggests that the scaling penalty is primarily resolution-driven rather than settings-driven, since the relative losses remain stable across different quality levels. The High preset follows the same pattern: 59.3 FPS at 1080p, 42.5 at 1440p, and 24.1 at 4K, representing drops of 28% and 43% respectively.

Ultra settings exhibit the most dramatic scaling behavior. The average FPS at 1080p Ultra is 39.0, which falls to 29.9 at 1440p and then plummets to 16.6 at 4K. The 4K Ultra result is less than half of the 1080p Ultra figure, and it falls below the 24 FPS threshold typically considered minimally playable for sustained action. The delta between 1440p and 4K at Ultra is 44%, which is the steepest single-step drop in the entire dataset. This indicates that the GTX 1660 Ti's 6 GB memory buffer and 288.0 GB/s bandwidth are saturated at 4K Ultra, causing the frame rate to collapse.

What these numbers reveal about the limiting component is clear. At 1080p, the gap between Low (103.5 FPS) and Ultra (39.0 FPS) is substantial, showing that the GPU has headroom at lower settings but becomes constrained as quality increases. At 4K, even Low settings only produce 40.2 FPS, which means the GPU is the bottleneck across all presets at that resolution. The CPU, with its 4 cores and 8 threads, appears sufficient to feed the GPU at 1080p Low where the frame rate exceeds 100 FPS, but the performance ceiling is dictated by the graphics card's compute capabilities. The data shows that Archeage is heavily GPU-bound at 1440p and above for this combo, with the scaling curve flattening as resolution increases.

CPU Role

The Intel Core i3-12100F brings 4 cores and 8 threads to this pairing, with a base clock of 3.30 GHz and a boost clock of 4.30 GHz. The CPU belongs to the Alder Lake architecture on a 10 nm process node, and its benchmark scores indicate strong single-thread performance relative to its multi-thread capabilities. The Cinebench R23 single-core score of 1681 and multi-core score of 11912 show a 7:1 ratio between multi and single-threaded results, which is typical for a quad-core processor with hyperthreading. The 3DMark results reinforce this pattern: 4-thread score of 2859 versus max-thread score of 4023, indicating that the CPU scales reasonably well up to 8 threads but gains little beyond that.

In Archeage, an MMORPG that historically relies on fewer threads for its main game logic, the single-thread performance matters more than raw core count. The i3-12100F's PassMark single-thread score of 3444 and Geekbench single-core score of 2224 position it well for this workload. The CPU's percentile rank of 72 against all CPUs suggests it outperforms roughly three-quarters of tested processors, which is respectable for a mainstream quad-core. Its nearest rivals include the AMD Ryzen Threadripper PRO 3975WX with an average score of 13534 (0.1% lower delta) and the Intel Core i7-7700K with an average score of 13280 (1.8% lower delta), meaning the i3-12100F sits in competitive company despite having far fewer cores than the Threadripper part.

The measured FPS data suggests that the CPU is not the primary constraint at higher resolutions. At 1080p Low, the system achieves 103.5 FPS, which is high enough that the CPU's single-thread performance is likely near its ceiling for Archeage's engine. However, at 1080p Ultra, the frame rate drops to 39.0 FPS, a 62% reduction from Low, which cannot be attributed to CPU limitations alone. The GPU's PassMark G3D score of 12871 and its percentile rank of 55 indicate a mid-range graphics card, and the frame rate scaling across settings at a fixed resolution points to GPU-bound behavior. The CPU's boost clock of 4.30 GHz provides adequate headroom for the game's single-threaded tasks, but the data does not show the CPU becoming a bottleneck until the GPU is already saturated.

The L3 cache of 12 MB shared across 4 cores is generous for a quad-core part, and the memory support for DDR4 and DDR5 with a dual-channel bus gives the system flexibility. The CPU's TDP of 58 W is low, but this does not directly translate to gaming performance. The 3DMark 8-thread score of 4026 is nearly identical to the max-thread score of 4023, confirming that the CPU's performance is fully utilized at 8 threads and that Archeage's typical thread usage falls within this range. For this game, the i3-12100F provides sufficient compute to avoid limiting the GTX 1660 Ti at 1080p, but at 1440p and 4K, the GPU's workload dominates the frame time.

FAQ

Q: What is the best resolution to play Archeage with this combo?

A: The data shows 1920x1080 as the only resolution where all settings presets remain at least marginally playable. At 1080p, Low achieves 103.5 FPS, Medium reaches 87.6 FPS, High hits 59.3 FPS, and Ultra manages 39.0 FPS. At 1440p, only Low (70.2 FPS) and Medium (57.5 FPS) stay above 30 FPS, while High drops to 42.5 FPS and Ultra falls to 29.9 FPS. At 4K, every preset falls below 41 FPS, with Ultra at 16.6 FPS.

Q: How does the CPU compare to its nearest rivals in overall benchmark scores?

A: The Intel Core i3-12100F has an average benchmark score of 13516. Its nearest rival, the AMD Ryzen Threadripper PRO 3975WX, scores 13534, which is 0.1% higher. The Intel Core i7-1250U scores 13462 (0.4% lower), the Intel Core i3-10105 scores 13430 (0.6% lower), and the Intel Core i7-7700K scores 13280 (1.8% lower). The i3-12100F sits within 2% of all four rivals, despite having far fewer cores than the Threadripper part.

Q: Is the GTX 1660 Ti a strong performer relative to other GPUs?

A: The GPU's average benchmark score is 13925, with a percentile rank of 55 against all GPUs. Its nearest rival, the AMD Radeon RX 570X, scores 13871 (0.4% lower), while the NVIDIA Tesla K10 scores 14029 (0.7% higher), the RTX A2000 Mobile scores 13821 (0.8% lower), and the GTX 680 scores 13812 (0.8% lower). The GTX 1660 Ti is essentially tied with these cards, placing it in the middle of the GPU performance distribution.

Q: What frame rate can I expect at 1440p with High settings?

A: The measured average is 42.5 FPS at 2560x1440 with High settings. This is above the 30 FPS threshold for playability but below the 60 FPS target for smooth gameplay. For comparison, 1440p Low achieves 70.2 FPS and 1440p Medium achieves 57.5 FPS, so dropping to Medium would provide a more comfortable margin.

Q: Does the combo rank well among all tested systems in Archeage?

A: The combo ranks 1494th out of 1727 tested combinations, placing it in the bottom 14% of all systems measured for this game. This is a low overall rank, but the data shows that the system can still deliver playable frame rates at 1080p with appropriate settings.

Q: How does the CPU's multi-threaded performance compare to its single-threaded performance?

A: The Cinebench R23 multi-core score is 11912, while the single-core score is 1681, giving a multi-to-single ratio of approximately 7.1. The 3DMark 4-thread score is 2859, the 8-thread score is 4026, and the max-thread score is 4023, indicating that performance plateaus after 8 threads. The PassMark multi-thread score of 14015 versus single-thread score of 3444 shows a similar pattern.

How This Combo Ranks

The combo rank of 1494 out of 1727 tested combinations places this system in the lower quartile of all measured hardware pairings in Archeage. This rank reflects the overall performance envelope across the twelve tested configurations, which range from 16.6 FPS at 4K Ultra to 103.5 FPS at 1080p Low. The ranking is influenced by the fact that Archeage is a demanding MMORPG, and the GTX 1660 Ti's mid-range position (percentile 55) combined with the i3-12100F's above-average CPU position (percentile 72) still results in a system that cannot reach high frame rates at higher resolutions.

The GPU's performance class is the primary driver of this rank. With a PassMark G3D score of 12871 and an average benchmark score of 13925, the GTX 1660 Ti sits just above the median GPU, but Archeage's rendering demands at 1440p and 4K push it beyond its comfortable operating range. The CPU, by contrast, is well-suited for this game's threading model, as evidenced by its 3DMark 8-thread score of 4026 being nearly equal to its max-thread score of 4023. The CPU's strong single-thread performance (PassMark single-thread score of 3444) helps at 1080p, where the system can exceed 100 FPS on Low settings, but this advantage is negated at higher resolutions where the GPU becomes the bottleneck.

Relative to other combos, this ranking suggests that users seeking higher frame rates in Archeage would need a more powerful GPU, since the CPU is not the limiting factor in most tested configurations. The data shows that the frame rate drops from 103.5 FPS at 1080p Low to 40.2 FPS at 4K Low, a 61% reduction, while the CPU's performance would not change with resolution. The rank of 1494 indicates that there are 233 combos that perform worse, but the vast majority of tested systems outperform this pairing. For an MMORPG like Archeage, where large-scale battles can tax both CPU and GPU, this rank reflects a system that handles solo or small-group content adequately but may struggle in crowded scenarios at higher resolutions.

Settings Recommendations

The measured data provides clear guidance on which settings preset offers the best experience for this combo. At 1920x1080, the High preset delivers 59.3 FPS, which is close to the 60 FPS target for smooth gameplay. This is the optimal balance for most players, as it provides quality visuals while maintaining frame rates above the playability threshold. The Medium preset at 87.6 FPS offers a higher frame rate buffer, making it suitable for players who prioritize responsiveness over visual fidelity, particularly in PvP situations. The Low preset at 103.5 FPS is only recommended for competitive play where maximum frame rate is essential, since the visual quality reduction may be noticeable.

At 2560x1440, the recommended preset is Medium, which achieves 57.5 FPS. This is the only 1440p preset that remains close to 60 FPS, with Low at 70.2 FPS providing an even safer margin but with reduced visuals. The High preset at 42.5 FPS is playable but may feel sluggish during intense combat, while Ultra at 29.9 FPS falls below the 30 FPS threshold that many consider the minimum for acceptable playability. For 4K resolution, no preset achieves a truly playable frame rate: Low at 40.2 FPS is the best option, but even this will struggle in crowded areas. The Ultra preset at 16.6 FPS should be avoided entirely.

The data indicates that the best overall experience for this combo is 1080p High, which provides a 59.3 FPS average with the visual benefits of higher-quality settings. Players who own 1440p monitors should select Medium settings to maintain frame rates near 60 FPS, accepting some visual compromise. The 4K resolution is not recommended for this system, as even Low settings produce only 40.2 FPS, and the game's MMORPG nature with frequent UI elements and particle effects would likely cause noticeable stuttering. The GTX 1660 Ti's 6 GB of GDDR6 memory with 288.0 GB/s bandwidth is sufficient for 1080p and 1440p, but the 4K Ultra result of 16.6 FPS confirms that the card lacks the memory capacity and bandwidth to handle Archeage at that resolution with high-quality settings. For the best balance of visual quality and performance, 1080p High is the clear choice, with 1440p Medium as a viable alternative for users with higher-resolution displays.

Hardware Specifications

Intel Core i3-12100F

Cores / Threads 4 / 8
Base Clock 3300 MHz
Boost Clock 4300 MHz
TDP 58W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce GTX 1660 Ti

VRAM 6 GB GDDR6
Base Clock —
Boost Clock 1770 MHz MHz
TDP 120 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i3-12100F + NVIDIA GeForce GTX 1660 Ti in Archeage

Resolution Settings Avg FPS
3840x2160 Low 40.2
3840x2160 Medium 33.7
3840x2160 High 24.1
3840x2160 Ultra 16.6
2560x1440 Low 70.2
2560x1440 Medium 57.5
2560x1440 High 42.5
2560x1440 Ultra 29.9
1920x1080 Low 103.5
1920x1080 Medium 87.6
1920x1080 High 59.3
1920x1080 Ultra 39.0

Archeage with ii3-12100F + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with GTX 1660 Ti + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with ii3-12100F + GTX 1660 Ti

Explore FPS benchmarks for other games using this same hardware combination.