Archeage

# Archeage with AMD Ryzen 9 9900X3D + NVIDIA GeForce RTX 3070

The AMD Ryzen 9 9900X3D paired with the NVIDIA GeForce RTX 3070 produces a solid but uneven Archeage experience that hinges heavily on resolution and settings. The combo ranks 1589th out of 3708 tested configurations, placing it in the upper-middle tier. The data shows a system where the CPU is rarely the limiting factor in this 2014 MMORPG; instead, the RTX 3070's 8 GB VRAM and Ampere architecture dictate performance ceilings, especially at higher resolutions. This analysis breaks down how the measured FPS numbers translate into practical settings and resolution choices.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and reveals a GPU-bound workload at higher resolutions. At High settings, the average FPS falls from 105 at 1920x1080 to 70 at 2560x1440, then to 40 at 3840x2160. That is a 33% drop from 1080p to 1440p and another 43% drop from 1440p to 4K. The scaling is consistent with a graphics card that has 8 GB of GDDR6 memory and a 256-bit bus, as the RTX 3070's 448.0 GB/s bandwidth gets stretched thin at 4K.

The trend is even more pronounced at Ultra settings. The average FPS is 71 at 1080p, falls to 48 at 1440p, and collapses to 28 at 4K. This 60% reduction from 1080p to 4K indicates that Ultra presets push the RTX 3070 well beyond its comfort zone at higher resolutions. The gap between Low and Ultra settings also widens as resolution increases, suggesting that the GPU's shading units and texture units are the primary bottleneck once pixel count rises.

At Low settings, the system manages 173 FPS at 1080p, 116 FPS at 1440p, and 67 FPS at 4K. The 4K Low result is notable because it still falls below 70 FPS, confirming that even with reduced graphical load, the RTX 3070 cannot sustain high frame rates at 4K in Archeage. The 1080p to 4K scaling at Low is a 61% performance loss, which mirrors the Ultra preset's loss, indicating the GPU is consistently the limiting component across all settings.

The medium preset shows the most balanced scaling curve. From 154 FPS at 1080p to 104 FPS at 1440p to 59 FPS at 4K, the incremental drops are 32% and 43% respectively. The min FPS values at 1080p (131) and 1440p (88) suggest that Medium is the only preset where the system maintains playable frame times at 1440p. At 4K Medium, the min FPS of 50 is still above the 30 FPS threshold but below the 60 FPS target many players prefer.

The CPU is not the constraint here. The Ryzen 9 9900X3D has 12 cores, 24 threads, and a 128 MB L3 cache, with a boost clock of 5.50 GHz. Its Cinebench R23 multicore score of 47737 and single-core score of 6739 place it well above what an MMORPG like Archeage would need, even in crowded zones. The data shows the GPU is the bottleneck at every resolution above 1080p Low.

Settings Recommendations

The measured rows point to Medium as the sweet spot for this combo. At 1920x1080, Medium delivers 154 FPS average with a 131 FPS minimum, which is comfortably above the 144 Hz refresh rate of many gaming monitors. At 2560x1440, Medium drops to 104 FPS average with an 88 FPS minimum, still playable for most users but not ideal for high-refresh displays. At 3840x2160, Medium produces 59 FPS average with a 50 FPS minimum, which is borderline for smooth gameplay.

High settings are the next viable option if you prioritize visual fidelity over raw frame rate. At 1080p, High yields 105 FPS average, which is respectable for most users. At 1440p, High drops to 70 FPS, which is acceptable for slower-paced MMORPG gameplay. However, at 4K, High falls to 40 FPS average, making it difficult to recommend for anything beyond casual exploration.

Ultra settings are only practical at 1080p, where the 71 FPS average is playable but not stellar. At 1440p, Ultra produces 48 FPS, which may cause noticeable stutter in combat scenarios. At 4K, Ultra's 28 FPS average is below the 30 FPS minimum for playability, and the data shows no min or max FPS values for this configuration, suggesting inconsistent performance.

Low settings are the fallback for maximum frame rates. The 173 FPS at 1080p and 116 FPS at 1440p are excellent for competitive play, but the visual downgrade in an MMORPG with detailed environments may not be worth it. At 4K, Low's 67 FPS is the only preset that breaks 60 FPS, but it still requires significant graphical compromises.

For a balanced experience, Medium at 1440p is the recommended configuration. The 104 FPS average and 88 FPS minimum provide smooth gameplay without the visual sacrifices of Low settings. If you have a 1080p monitor, High at 105 FPS is a better choice than Medium at 154 FPS, as the extra visual quality is worth the frame rate reduction. At 4K, stick with Medium for the 59 FPS average, as High at 40 FPS and Ultra at 28 FPS are too inconsistent.

GPU Role

The NVIDIA GeForce RTX 3070 is the definitive performance limiter in this configuration. Its 8 GB of GDDR6 memory on a 256-bit bus provides 448.0 GB/s of bandwidth, which is sufficient for 1080p and 1440p but marginal for 4K in a game with large textures. The GPU's 5888 shading units, 184 TMUs, and 96 ROPs deliver 20.31 TFLOPS of FP32 compute, but this raw power is constrained by the memory subsystem at higher resolutions.

The clock speeds of 1500 MHz base and 1725 MHz boost are modest by modern standards, and the data suggests they are not the primary factor in performance scaling. The pixel rate of 165.6 GPixel/s and texture rate of 317.4 GTexel/s are adequate for the measured FPS results, but the GPU's percentile rank of 61 among all GPUs indicates it is a mid-tier part in the current landscape.

The RTX 3070's nearest rivals in the benchmark database include the AMD Radeon RX 7600 XT with an average score of 17083 and a delta of 0.7%, and the NVIDIA GeForce GTX 690 with 17037 and a delta of 1%. The RTX 3070's own average benchmark score of 17208 places it slightly above these competitors, but the differences are minimal. The GTX 690 is a much older card, yet its performance is within 1% of the RTX 3070 in synthetic tests, which underscores how the 3070's 8 GB VRAM and Ampere architecture are not fully leveraged in Archeage's older engine.

The GPU's 61st percentile ranking versus all GPUs, combined with its end-of-life production status, suggests that this card is reaching its limits in modern titles. In Archeage, the VRAM capacity is a particular concern at 4K, where the 8 GB buffer may cause texture thrashing in busy areas. The measured FPS at 4K Medium (59) versus 4K High (40) reveals a 32% performance penalty, which is likely driven by both VRAM pressure and shader complexity.

Measured FPS Breakdown

At 1920x1080, the system delivers its best results. Low settings produce 173 FPS average, Medium produces 154 FPS with a 131 FPS minimum and 177 FPS maximum, High produces 105 FPS, and Ultra produces 71 FPS. The spread from Low to Ultra is 102 FPS, indicating that the settings range has a massive impact on performance at this resolution.

At 2560x1440, the performance drops significantly. Low settings yield 116 FPS, Medium yields 104 FPS with an 88 FPS minimum and 119 FPS maximum, High yields 70 FPS, and Ultra yields 48 FPS. The gap between Low and Ultra narrows to 68 FPS, showing that the GPU is becoming more of a bottleneck. The Medium preset's 88 FPS minimum is still above the 60 FPS threshold, making it the safest choice for 1440p.

At 3840x2160, the system struggles at higher settings. Low produces 67 FPS, Medium produces 59 FPS with a 50 FPS minimum and 68 FPS maximum, High produces 40 FPS, and Ultra produces 28 FPS. The Low to Ultra spread is only 39 FPS, confirming that the GPU is saturated. The Medium preset's 50 FPS minimum is the only configuration at 4K that stays above 30 FPS, but it still falls short of 60 FPS.

The min and max FPS data is only provided for the Medium preset across all resolutions. At 1080p, the 131-177 FPS range indicates stable frame pacing. At 1440p, the 88-119 FPS range shows more variance but remains consistent. At 4K, the 50-68 FPS range has a wider relative spread, suggesting that frame times become less predictable at higher resolutions. This data reinforces that Medium is the most stable preset for this combo.

How This Combo Ranks

The AMD Ryzen 9 9900X3D and NVIDIA GeForce RTX 3070 combo ranks 1589th out of 3708 tested configurations in Archeage, placing it in the 57th percentile of all combos. This is a middle-of-the-pack result for a system with an upper-tier CPU and a mid-tier GPU. The ranking reflects the GPU's limitations in this title, as the CPU's 91st percentile ranking among all CPUs is significantly higher than the GPU's 61st percentile.

The CPU's nearest rivals in synthetic benchmarks include the Intel Core Ultra 5 245KF with an average score of 55093 and a delta of -0.6%, meaning the Ryzen 9 9900X3D is slightly behind it. The Intel Core Ultra 5 245K scores 54053 with a delta of 1.3%, putting it slightly ahead of the Ryzen part. The Intel Xeon 6505P scores 53701 with a delta of 2%, and the Intel Core i7-14700F scores 53620 with a delta of 2.1%. These small deltas indicate that the Ryzen 9 9900X3D is competitive with mainstream Intel parts but does not dominate them.

The GPU's nearest rivals show a different story. The AMD Radeon RX 7600 XT scores 17083 with a delta of 0.7%, meaning the RTX 3070 is slightly ahead. The NVIDIA GeForce GTX 690 scores 17037 with a delta of 1%, and the AMD Radeon HD 7970M scores 17019 with a delta of 1.1%. The NVIDIA Tesla K40c scores 17468 with a delta of -1.5%, putting it ahead of the RTX 3070. These results show that the RTX 3070 is grouped with older and less capable cards in synthetic tests, which explains its mid-tier ranking.

The combo's 1589th rank out of 3708 combos means there are 2119 configurations that perform worse, but also 1588 that perform better. This places the system in the upper half of all tested combos, but not in the top tier. For an MMORPG like Archeage, this ranking is acceptable, but players seeking high refresh rates at 1440p or 4K may need to consider a stronger GPU.

FAQ

Q: What is the best resolution for this combo in Archeage?

A: The data shows 1920x1080 is the most comfortable resolution, with all presets exceeding 70 FPS average. At 2560x1440, only Low and Medium presets stay above 100 FPS, while 3840x2160 requires Medium or lower to maintain playable frame rates.

Q: Should I use Ultra settings with this combo?

A: Ultra settings are only viable at 1080p, where the average FPS is 71. At 1440p, Ultra drops to 48 FPS, and at 4K, it falls to 28 FPS, which is below playable thresholds. The data suggests Medium is a better choice for consistent performance.

Q: How does the RTX 3070 compare to its nearest rivals in this game?

A: The RTX 3070's average benchmark score of 17208 is 0.7% higher than the AMD Radeon RX 7600 XT and 1% higher than the NVIDIA GeForce GTX 690. However, the NVIDIA Tesla K40c scores 1.5% higher, indicating the 3070 is not a standout performer in synthetic tests.

Q: Is the Ryzen 9 9900X3D holding back the RTX 3070 in Archeage?

A: The CPU's Cinebench R23 multicore score of 47737 and single-core score of 6739, combined with its 91st percentile ranking, suggest it is not the bottleneck. The FPS scaling from 1080p to 4K indicates the GPU is the limiting component.

Q: What is the expected frame rate at 1440p Medium settings?

A: The measured data shows 104 FPS average with an 88 FPS minimum and 119 FPS maximum. This is the most stable configuration at 1440p, providing smooth gameplay for an MMORPG.

Q: Can this combo handle 4K gaming in Archeage?

A: Yes, but only at Low or Medium settings. Low produces 67 FPS average, and Medium produces 59 FPS with a 50 FPS minimum. High and Ultra settings fall to 40 FPS and 28 FPS respectively, which are not recommended for 4K.