Archeage

Resolution Scaling

The measured FPS data for ArcheAge with the AMD Ryzen 9 7900X and NVIDIA GeForce RTX 3070 reveals a clear pattern of performance scaling across resolutions. At 1920x1080 with Low settings, the system achieves 176.7 FPS, which drops to 120.1 FPS at 2560x1440 and further to 65.3 FPS at 3840x2160. This represents a 31.9% reduction from 1080p to 1440p, and a 45.6% reduction from 1440p to 4K at Low settings.

The scaling behavior changes dramatically when moving to higher quality presets. At High settings, the frame rate falls from 104.7 FPS at 1080p to 70.2 FPS at 1440p (a 32.9% drop), then to 37.8 FPS at 4K (a 46.2% drop from 1440p). The Ultra preset shows similar proportional scaling: 71.9 FPS at 1080p, 45.6 FPS at 1440p, and 28.9 FPS at 4K.

The diminishing returns at higher resolutions indicate that the RTX 3070's rendering pipeline becomes the primary limiting factor as pixel count increases. The gap between Low and Ultra settings narrows as resolution climbs: at 1080p, Ultra delivers 40.7% of Low's frame rate, but at 4K, Ultra delivers 44.3% of Low's frame rate. This suggests that at 4K, the GPU is so heavily loaded that even reducing settings to Low cannot fully compensate for the pixel throughput demands, though the 65.3 FPS at Low 4K remains playable.

GPU Role

The NVIDIA GeForce RTX 3070 is built on the Ampere architecture with a GA104 chip manufactured on Samsung's 8 nm process. The GPU operates at a base clock of 1500 MHz and boosts to 1725 MHz, with memory running at 1750 MHz (14 Gbps effective). The 8 GB of GDDR6 memory on a 256-bit bus provides 448.0 GB/s of bandwidth, which is a critical factor for ArcheAge's texture streaming and large-scale player environments.

The GPU's compute capabilities include 5888 shading units, 184 texture mapping units, and 96 raster output units. The 46 RT cores and 184 tensor cores are present but ArcheAge does not heavily utilize ray tracing or DLSS features, so these resources remain largely idle during typical gameplay. The FP32 performance of 20.31 TFLOPS and texture rate of 317.4 GTexel/s directly influence how quickly the GPU can process geometry and apply textures in busy MMORPG scenes.

The RTX 3070's benchmark results show a PassMark G3D score of 22214 and a PassMark GPU Compute score of 11195. In 3DMark Steel Nomad DX12, it scores 3162. The GPU's percentile ranking of 72 among all GPUs puts it in the upper tier, though its nearest rivals include the AMD Radeon RX 6600 XT with a 0.9% higher average score, and the NVIDIA GeForce GTX 980 Ti with a 1% higher average score. The measured FPS data shows that at 1440p High settings, the 70.2 FPS result is smooth, but the 4K Ultra result of 28.9 FPS indicates the 8 GB VRAM capacity and memory bandwidth become constraints at extreme resolutions.

FAQ

Q: What is the best resolution for this CPU/GPU combo in ArcheAge?

A: Benchmark data shows 2560x1440 with Medium settings delivers 106.7 FPS, while High at the same resolution drops to 70.2 FPS. The 3840x2160 resolution only achieves 37.8 FPS at High, suggesting 1440p is the practical ceiling for high refresh rate gameplay.

Q: How does the Ultra preset compare to High at 1080p?

A: At 1920x1080, Ultra produces 71.9 FPS versus 104.7 FPS for High, representing a 31.3% performance penalty for the highest quality settings. The difference narrows at 4K, where Ultra yields 28.9 FPS compared to 37.8 FPS for High.

Q: Is the RTX 3070 capable of 4K gaming in ArcheAge?

A: Yes, but only at Low settings where it achieves 65.3 FPS. Medium at 4K drops to 61.4 FPS, High falls to 37.8 FPS, and Ultra becomes borderline unplayable at 28.9 FPS. The GPU's 8 GB VRAM and memory bandwidth appear to be limiting factors at this resolution.

Q: How does the CPU affect performance in this game?

A: The Ryzen 9 7900X with 12 cores and 24 threads has a PassMark multithread score of 51406 and a Cinebench R23 multicore score of 43695. In ArcheAge, the CPU's single-thread performance (PassMark single-thread score of 4238) is more relevant since MMORPGs often rely on a few heavily loaded threads for game logic and draw calls.

Q: What is the frame rate difference between Low and Ultra at 1440p?

A: Low delivers 120.1 FPS, Medium 106.7 FPS, High 70.2 FPS, and Ultra 45.6 FPS. The jump from High to Ultra incurs a 35.0% frame rate reduction, while moving from Low to Medium only costs 11.2% performance.

Q: Does the GPU's performance ranking match its in-game results?

A: The RTX 3070 has a percentile ranking of 72 among all GPUs with an average benchmark score of 28238. In ArcheAge specifically, the combo ranks 768 out of 1727 tested combinations, indicating that while the GPU is above average, the game's optimization may not fully utilize its capabilities.

Measured FPS Breakdown

At 1920x1080, the RTX 3070 delivers its highest frame rates across all settings. Low settings produce 176.7 FPS, which is more than sufficient for high refresh rate monitors. Medium settings remain highly playable at 156.1 FPS, while High drops to 104.7 FPS and Ultra falls to 71.9 FPS. The progression from Low to Ultra at 1080p shows a cumulative 59.3% performance loss.

Moving to 2560x1440, the frame rates decrease proportionally. Low achieves 120.1 FPS, Medium 106.7 FPS, High 70.2 FPS, and Ultra 45.6 FPS. The 1440p results show that Medium settings maintain above 100 FPS, making it the sweet spot for competitive play. High at 1440p still provides a smooth experience, but Ultra begins to show strain.

At 3840x2160, the GPU's limitations become apparent. Low produces 65.3 FPS, which is playable but not ideal for fast-paced combat. Medium delivers 61.4 FPS, nearly identical to Low due to memory bandwidth constraints. High drops to 37.8 FPS, and Ultra falls to 28.9 FPS, both below the threshold for smooth gameplay. The 4K results suggest that the RTX 3070's 8 GB VRAM and 448.0 GB/s bandwidth cannot sustain high-quality textures at this resolution.

The data shows consistent scaling: each resolution step roughly halves the pixel count, and the frame rates reflect this load. The RTX 3070's PassMark DirectX 12 score of 85 and DirectX 11 score of 182 provide context for its API-specific performance, though ArcheAge's engine likely relies on older DirectX paths.

Settings Recommendations

The optimal settings depend on the target resolution and desired frame rate. At 1920x1080, High settings at 104.7 FPS offer the best balance between visual quality and performance, as Ultra only provides marginal visual improvements while costing 31.3% performance. For players prioritizing maximum frame rates, Low at 176.7 FPS is the clear choice.

At 2560x1440, Medium settings at 106.7 FPS deliver the best experience. The 120.1 FPS from Low settings is only 12.6% higher, while the visual upgrade from Medium to High costs 34.2% performance. Ultra at 1440p drops to 45.6 FPS, which is below the 60 FPS threshold for comfortable gameplay.

For 3840x2160, the data indicates that Low settings at 65.3 FPS are the only viable option for consistent gameplay. Medium at 61.4 FPS offers minimal visual improvement over Low, while High and Ultra fall below acceptable playability thresholds. The 4K results suggest that players with 4K displays should consider lowering resolution scaling or accepting reduced visual fidelity.

Overall, the Medium preset provides the most balanced experience across all resolutions, with the RTX 3070's architecture showing efficient scaling between Low and Medium before hitting a steep performance cliff at High and Ultra.

CPU Role

The AMD Ryzen 9 7900X is a 12-core, 24-thread processor from the Zen 4 architecture (Raphael codename) built on TSMC's 5 nm process. Its base clock of 4.70 GHz and boost clock of 5.60 GHz provide strong single-thread performance, as evidenced by a Cinebench R23 single-core score of 6168 and a Geekbench single-core score of 2952. The 64 MB of shared L3 cache and 1 MB per-core L2 cache help reduce memory latency in game logic threads.

ArcheAge, being an MMORPG from 2014, does not heavily utilize multi-threading. The CPU's PassMark multithread score of 51406 shows massive parallel capability, but the game's performance is more dependent on single-thread speed. The 3DMark 16-thread score of 10972 versus the 2-thread score of 2137 highlights the scaling efficiency, though this does not directly translate to game performance.

The CPU's percentile ranking of 93 among all CPUs places it well above the RTX 3070's percentile of 72, indicating that the CPU is not the bottleneck in this configuration. The nearest CPU rivals include the Intel Core Ultra 5 235 with a -0.1% delta, AMD Ryzen 9 5900XT at -0.4%, and Intel Core i7-13850HX at -0.5%, all showing statistically similar average benchmark scores. This suggests that the Ryzen 9 7900X's performance in ArcheAge is sufficient to keep the GPU fully utilized, particularly at lower resolutions where the GPU is less stressed.

The CPU's 170 W TDP and dual-channel DDR5 memory support with 83.2 GB/s bandwidth provide ample data throughput for game assets. The integrated Radeon Graphics are available but not used in this configuration. The 13,140 million transistors across a 2x 71 mm² die size contribute to its high benchmark scores, including a PassMark floating point math score of 103952 and integer math score of 169273. In ArcheAge, the CPU's role is to handle game state updates, network processing, and draw call submission, tasks that benefit from the high boost clock and low-latency cache hierarchy.