Archeage

The AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 4080 combination delivers a commanding performance in Archeage, with the data showing a clear trend: the pairing is exceptionally strong at 1080p and 1440p, but frame rates fall sharply at 4K Ultra settings. This is a system built for high-refresh-rate play at mainstream resolutions, yet it struggles to maintain smooth motion at the highest visual fidelity in this MMORPG.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 7 9850X3D is a desktop processor from the 9000 series, built on the Zen 5 architecture with the Granite Ridge codename. It features 8 cores and 16 threads, with a base clock of 4.70 GHz and a boost clock of 5.60 GHz. The processor's substantial 96 MB of shared L3 cache is a key asset for gaming workloads, as it allows for faster access to frequently used data, which is critical in MMO environments with many entities and players. The CPU also supports DDR5 memory with a dual-channel bus, offering a memory bandwidth of 89.6 GB/s.

In the context of Archeage, the CPU's performance is a significant factor. Benchmark results show a Cinebench R23 multi-core score of 22807 and a single-core score of 2228, indicating a strong balance between multi-threaded and single-threaded capabilities. The Passmark single-thread score of 4704 reinforces this, suggesting that the processor can handle the game's core simulation logic without bottlenecking the GPU. The data shows that at 1080p with Low settings, the combo achieves 269 FPS, a figure that demonstrates the CPU's ability to feed frames rapidly when the GPU is not heavily burdened. This is a classic sign of a CPU that can keep up with the game's physics and AI calculations.

The Ryzen 7 9850X3D holds a percentile rank of 92 against all CPUs, placing it in the top tier of processors. Its average benchmark score is 58386, which is nearly identical to its nearest rivals. For instance, it is only 0.1% ahead of the Intel Xeon Platinum 8260M and 0.2% behind the Intel Xeon w5-2545. The processor also has a 0.5% lead over the Intel Core i9-14900. These deltas are minimal, meaning that in synthetic tests, the CPU is effectively tied with these competitors. However, in a game like Archeage, the combination of high clocks and the large L3 cache is likely to provide a tangible benefit, as reflected in the measured FPS figures.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the highest average frame rate recorded for this combo in Archeage?

A: The highest average frame rate is 269 FPS, achieved at 1920x1080 resolution with Low settings.

Q: How does the combo perform at 4K resolution?

A: At 3840x2160, the average frame rates range from 104 FPS on Low settings down to 43 FPS on Ultra settings. The High setting produces 63 FPS, while Medium yields 92 FPS.

Q: What is the difference in average FPS between 1080p and 4K at High settings?

A: At 1920x1080 High, the average FPS is 163. At 3840x2160 High, it drops to 63 FPS, representing a substantial decrease of 100 FPS.

Q: Is there a frame rate dip between Medium and Ultra settings at 1440p?

A: Yes, at 2560x1440, the Medium setting averages 161 FPS, but the Ultra setting drops to 75 FPS, a reduction of 86 FPS.

Q: What are the minimum and maximum FPS recorded at 1080p Medium settings?

A: At 1920x1080 with Medium settings, the minimum FPS is 204 and the maximum is 276, with an average of 240 FPS.

Q: How does the combo's rank compare to other tested combinations?

A: The combo ranks 203rd out of 3708 tested combos in Archeage, placing it in the top 5.5% of all configurations tested.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data reveals a clear pattern of resolution scaling. At 1920x1080 with Low settings, the combo achieves 269 FPS. Moving to 2560x1440 Low drops the average to 181 FPS, and at 3840x2160 Low, it falls to 104 FPS. This progression shows a significant performance cost as pixel count increases. Similarly, at High settings, the average FPS goes from 163 at 1080p, to 110 at 1440p, and finally to 63 at 4K. The scaling is not linear, but it is steep, indicating that the GPU is becoming the primary bottleneck as resolution increases.

The data suggests that at 1080p, the system is likely CPU-bound or at least well-balanced, given the extremely high frame rates. The CPU's strong single-thread performance allows it to push high frame rates, but as resolution climbs, the load shifts to the GPU. The RTX 4080, while capable, cannot maintain the same frame rates at 4K. This is evidenced by the 4K Ultra average of just 43 FPS, which is a demanding scenario. The drop from Medium to Ultra at 4K is also telling: from 92 FPS to 43 FPS, a 49 FPS decrease, showing that the GPU's rendering pipeline is overwhelmed by the highest settings at this resolution.

The implication is that for competitive or high-refresh-rate play, 1080p or 1440p are the sweet spots. The 4K Ultra figure of 43 FPS is below the 60 FPS threshold that many consider smooth, making it unsuitable for a fluid experience. The limiting component at 4K is clearly the GPU, as the CPU's performance headroom, as indicated by its benchmark scores, is likely not the constraining factor. This is a typical example of a high-end CPU being paired with a powerful GPU, where the GPU becomes the deciding factor at higher resolutions.

How This Combo Ranks — use comboRankInGame vs other tested combos

In Archeage, this specific combination of the AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 4080 achieves a rank of 203 out of 3708 tested combos. This places the configuration in the top 5.5% of all systems tested for this game. The rank is based on the measured FPS across all tested resolutions and settings, providing a holistic view of performance. Being in the top 203 out of several thousand is a strong result, indicating that this pairing is well-suited for Archeage.

The rank of 203 suggests that while the combo is very fast, there are 202 other combinations that perform better in this specific game. This could be due to more powerful GPUs or CPUs, or combinations that are better optimized for Archeage's specific engine. However, the data shows that the system is far from the bottom, and it is positioned in the upper echelon of performance. The rank confirms the balance of the components, as a weaker CPU or GPU would likely push the combo lower in the rankings.

The high ranking is consistent with the measured FPS data, which shows high averages at lower resolutions. The rank also reflects the combo's ability to handle the game's demands, as it outperforms the vast majority of other configurations. While the top 200 combinations may include more exotic or expensive hardware, this pairing offers a level of performance that is in the top percentile, making it a viable choice for players seeking a high-fidelity experience. The rank is a strong indicator of the combo's overall capability in this title.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 4080 is a high-end graphics card from the GeForce 40-series, built on the Ada Lovelace architecture with the AD103 chip. It features 16 GB of GDDR6X memory on a 256-bit bus, providing a memory bandwidth of 716.8 GB/s. The GPU has a base clock of 2205 MHz and a boost clock of 2505 MHz. With 9728 shading units, 304 TMUs, and 112 ROPs, the card is designed for high-performance rendering. It also includes 76 RT cores and 304 tensor cores, which are beneficial for ray tracing and AI workloads, though their impact on Archeage's traditional rendering is likely minimal.

The GPU's role in Archeage is significant, particularly at higher resolutions. The 16 GB of VRAM is ample for the game's textures and assets, ensuring that memory capacity is not a bottleneck. The card's performance in synthetic benchmarks shows a Passmark G3D score of 34457, placing it in the 86th percentile against all GPUs. Its average benchmark score is 54247, which is nearly identical to its closest rival, the RTX 4080 SUPER, with a delta of only 0.1%. The card is also 1.1% ahead of the AMD Radeon Pro W5700X and 2.6% ahead of the AMD Radeon RX 6750 GRE 12 GB.

In the measured FPS data, the GPU's influence is clear. At 1080p, the card is capable of delivering high frame rates, but it is not the limiting factor. However, at 4K Ultra, the GPU is taxed heavily, resulting in an average of 43 FPS. This indicates that the card's raw compute power is the constraint at the highest settings. The card's pixel rate of 280.6 GPixel/s and texture rate of 761.5 GTexel/s are high, but the demands of 4K Ultra in Archeage are substantial. The data shows that the RTX 4080 is a powerful GPU, but it is not untouchable, and the most demanding settings will push it to its limits.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured FPS data provides a detailed look at performance across different resolutions and settings. At 1920x1080, the combo excels, with an average of 269 FPS on Low settings. The Medium setting produces an average of 240 FPS, with a minimum of 204 and a maximum of 276. High settings yield an average of 163 FPS, while Ultra drops to 111 FPS. These figures show that at 1080p, the system is more than capable of driving high-refresh-rate monitors, even at higher settings.

Moving to 2560x1440, the performance remains strong but sees a noticeable decrease. Low settings average 181 FPS, while Medium averages 161 FPS, with a minimum of 137 and a maximum of 186. High settings average 110 FPS, and Ultra drops to 75 FPS. The drop from Medium to Ultra is significant, showing a 86 FPS reduction, which highlights the increased load on the GPU at this resolution. The 1440p figures are still highly playable, with even Ultra settings exceeding 60 FPS.

At 3840x2160, the performance takes a significant hit. Low settings average 104 FPS, which is still smooth. Medium settings average 92 FPS, with a minimum of 79 and a maximum of 106. High settings drop to 63 FPS, which is playable but not ideal for competitive play. Ultra settings plummet to an average of 43 FPS, which is below the 60 FPS threshold for smooth gameplay. The scaling from 1080p to 4K is steep, with the Ultra setting at 4K being only 16% of the FPS at 1080p Low. This breakdown confirms that the combo is best utilized at 1080p or 1440p, where it can deliver high frame rates, while 4K play is only viable at lower settings.