Archeage

The AMD Ryzen 7 7700 paired with the NVIDIA GeForce RTX 3070 produces a predictable scaling pattern in Archeage, one that clearly identifies the GPU as the primary constraint at higher resolutions while revealing the CPU’s headroom at lower settings. This combination ranks 782nd out of 1,727 tested combos in this game, placing it in the upper-middle tier of the database.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent, with the magnitude of the decline varying by settings preset. At Low settings, the average frame rate falls from 175.5 FPS at 1920x1080 to 117.4 FPS at 2560x1440, a reduction of 33.1%. Moving from 1440p to 4K at Low settings brings the average down to 68 FPS, a further 42.1% drop. The total scaling from 1080p Low to 4K Low is 61.3% — a substantial loss that points directly at the RTX 3070’s 8 GB GDDR6 memory and 448.0 GB/s bandwidth being saturated as pixel count quadruples.

At Medium settings, the pattern is similar but with slightly softer absolute numbers. The 1920x1080 average of 152.6 FPS drops to 103.2 FPS at 2560x1440 (a 32.4% reduction), then to 61.8 FPS at 3840x2160 (a 40.1% reduction from 1440p). The total loss from 1080p to 4K at Medium is 59.5%. High settings show a more aggressive scaling curve: 102.8 FPS at 1080p, 68.8 FPS at 1440p (33.1% drop), and 43.1 FPS at 4K (37.4% drop from 1440p). The total reduction at High is 58.1%.

Ultra settings reveal the harshest scaling behavior. The 1080p average of 69.9 FPS falls to 50.7 FPS at 1440p (27.5% drop), then collapses to 25.8 FPS at 4K (49.1% drop from 1440p). The total loss from 1080p Ultra to 4K Ultra is 63.1%. The fact that the 4K-to-1440p ratio at Ultra is nearly 2:1 suggests the GPU is running out of memory bandwidth and raw compute capacity simultaneously, with the 8 GB frame buffer becoming a hard limit at 3840x2160.

The scaling data indicates that at 1080p, the Ryzen 7 7700’s 8 cores and 16 threads are sufficient to feed the RTX 3070 adequately across all presets. The 175.5 FPS at Low demonstrates that the CPU is not a bottleneck at lower settings. However, as resolution increases, the GPU’s 20.31 TFLOPS FP32 throughput becomes the limiting factor, which is expected for a card that ranks in the 72nd percentile among all GPUs.

FAQ

Q: What is the best resolution for this combo in Archeage if targeting 60 FPS?

A: At 2560x1440 with High settings, the combo achieves 68.8 FPS average, while 4K High drops to 43.1 FPS. The 1440p High preset is the only 1440p setting that stays above 60 FPS, and 1080p High at 102.8 FPS offers a large safety margin. For 4K, only Low settings (68 FPS) clear the 60 FPS threshold.

Q: How does the Ryzen 7 7700 compare to its nearest rivals in synthetic benchmarks?

A: The 7700’s average benchmark score of 40,468 places it 0.1% above the AMD Ryzen 9 7940H (40,431) and 0.5% above the AMD Ryzen AI 9 365 (40,262). It trails the Intel Core i9-13905H by 0.6% (40,712) but leads the Intel Core Ultra 5 235T by 1.2% (39,995). The 7700 sits in the 91st percentile of all CPUs.

Q: What is the FPS difference between Low and Ultra at 1080p?

A: At 1920x1080, Low settings produce 175.5 FPS average, while Ultra produces 69.9 FPS. This represents a 105.6 FPS gap, meaning Ultra runs at approximately 60.2% lower frame rate compared to Low. The 1080p Medium preset at 152.6 FPS sits much closer to Low than to Ultra.

Q: Is the RTX 3070’s performance in line with its nearest GPU rivals?

A: The RTX 3070’s average benchmark score of 28,238 is 0.9% higher than the AMD Radeon RX 6600 XT (27,985) and 1% higher than the NVIDIA GeForce GTX 980 Ti (27,956). It falls 0.6% behind the AMD FirePro S7150 (28,409) and 1.1% behind the AMD Radeon R9 M295X (28,541). The 3070 ranks in the 72nd percentile of all GPUs.

Q: How much FPS is gained by dropping from Ultra to High at 4K?

A: At 3840x2160, the Ultra preset averages 25.8 FPS while High averages 43.1 FPS. This is a 17.3 FPS improvement, representing a 67.1% increase in frame rate. The Medium preset at 61.8 FPS provides an additional 18.7 FPS over High.

Q: Does the combo rank higher or lower than average in Archeage?

A: The combo ranks 782nd out of 1,727 tested combinations, which places it in the 54.7th percentile. This is slightly below the median, indicating that while the individual components are above average (CPU at 91st percentile, GPU at 72nd percentile), the pairing is not optimized for Archeage’s specific workload characteristics.

Settings Recommendations

The measured FPS data suggests that the Low preset is the only setting that delivers consistently high frame rates across all resolutions. At 1080p Low, the combo achieves 175.5 FPS, which is more than sufficient for any display refresh rate commonly in use. However, the gap between Low and Medium at 1080p is only 22.9 FPS (175.5 vs 152.6), meaning Medium is a reasonable choice for users who prioritize visual quality without sacrificing fluidity.

At 1440p, the Medium preset at 103.2 FPS offers the best balance between visual fidelity and performance. The High preset at 68.8 FPS is still playable, but the 34.4 FPS drop from Medium to High is substantial. The Ultra preset at 50.7 FPS falls below the 60 FPS threshold, making it a poor choice for competitive play.

For 4K, the choices are more constrained. Low settings at 68 FPS is the only preset that remains comfortably above 60 FPS. Medium at 61.8 FPS is borderline, while High at 43.1 FPS and Ultra at 25.8 FPS are both below acceptable thresholds for smooth gameplay. The data shows that the RTX 3070’s 8 GB memory capacity is the limiting factor at 4K, as the high-resolution textures and effects in Ultra likely exceed the available VRAM.

The recommended configuration for general use is 1440p Medium, which provides over 100 FPS while retaining moderate visual quality. For users with 1080p displays, the High preset at 102.8 FPS offers a better visual experience than Medium at 152.6 FPS, since the frame rate is still well above 100 FPS. At 4K, users should accept Low settings if they demand 60+ FPS, or drop to 1440p if they prefer higher quality.

Measured FPS Breakdown

At 1920x1080, the combo delivers 175.5 FPS average on Low, 152.6 FPS on Medium, 102.8 FPS on High, and 69.9 FPS on Ultra. The progression from Low to Ultra shows a steady decline, with Ultra running at 60.2% of Low’s frame rate. The relative differences between presets are: Medium is 13.0% slower than Low, High is 32.6% slower than Medium, and Ultra is 32.0% slower than High.

At 2560x1440, the averages are 117.4 FPS on Low, 103.2 FPS on Medium, 68.8 FPS on High, and 50.7 FPS on Ultra. The scaling from 1080p to 1440p shows reductions of 33.1% at Low, 32.4% at Medium, 33.1% at High, and 27.5% at Ultra. The 1440p Ultra preset is the only configuration that drops below 60 FPS at this resolution.

At 3840x2160, the averages are 68 FPS on Low, 61.8 FPS on Medium, 43.1 FPS on High, and 25.8 FPS on Ultra. The scaling from 1440p to 4K shows reductions of 42.1% at Low, 40.1% at Medium, 37.4% at High, and 49.1% at Ultra. The 4K Ultra figure of 25.8 FPS is the lowest recorded value in this dataset, representing a 63.1% reduction from the 1080p Ultra score.

The data reveals that the combo is most efficient at 1080p, where even Ultra settings maintain nearly 70 FPS. The 1440p resolution is the practical ceiling for High settings, while 4K is only viable at Low or Medium presets. The consistency of the scaling percentages across presets suggests that the GPU is the dominant bottleneck, with the CPU’s 3.80 GHz base and 5.30 GHz boost clocks providing ample headroom.

How This Combo Ranks

The combo rank of 782 out of 1,727 tested combinations places this pairing in the 54.7th percentile for Archeage. This is notably lower than what the individual component percentiles might suggest — the Ryzen 7 7700 sits in the 91st percentile of all CPUs, and the RTX 3070 sits in the 72nd percentile of all GPUs. The discrepancy indicates that Archeage’s workload does not fully utilize the strengths of either component.

The CPU’s synthetic benchmark performance shows a strong single-thread score of 1,049 in 3DMark single-thread and 4,136 in Cinebench R23 single-core. These scores are competitive with the nearest rivals, which include the AMD Ryzen 9 7940H (0.1% lower average score) and the Intel Core i9-13905H (0.6% higher average score). The multi-threaded results are equally strong, with a Cinebench R23 multi-core score of 29,302 and a Passmark multi-thread score of 34,470.

The GPU’s synthetic benchmarks show a Passmark G3D score of 22,214 and a Geekbench OpenCL score of 123,479. These numbers place the RTX 3070 in the 72nd percentile, though the nearest rivals include older cards like the GTX 980 Ti (1% lower average score) and the Radeon R9 M295X (1.1% lower), which suggests the 3070’s architectural advantages are not always reflected in raw benchmark scores.

The combination’s mid-pack ranking in Archeage likely stems from the game’s MMORPG nature, which may rely heavily on draw calls and CPU-side simulation logic that the 7700 handles well, but the GPU’s 8 GB memory capacity becomes a constraint at higher resolutions and settings. For users seeking better performance, the data suggests that lowering resolution or settings provides more predictable gains than upgrading either component alone, since the bottleneck shifts depending on the preset chosen.