Archeage

Archeage is a 2014 MMORPG that remains sensitive to both CPU and GPU load, and the measured results for the AMD Ryzen 7 5700X3D paired with the NVIDIA GeForce RTX 5070 show a configuration that scales predictably across resolutions. The data indicates this combo ranks 385th out of 1727 tested combinations, placing it in the top quartile of systems for this title. The benchmark results are measured, not estimated, and they reveal a GPU that is capable of high refresh rates at mainstream resolutions but begins to strain under the heaviest visual settings at 4K.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent, which tells a clear story about where the bottleneck lies. At Low settings, the transition from 1920x1080 to 2560x1440 reduces the average frame rate from 194.8 FPS to 150.9 FPS, a drop of roughly 22%. Pushing further to 3840x2160 brings the average down to 90.4 FPS, which is a 36% reduction from the 1440p figure and a 54% reduction from the 1080p figure. This pattern indicates that at lower settings, the GPU is still managing the load well, but the pixel count is beginning to dominate.

Moving to High settings shows a similar scaling trend. The average FPS goes from 136.8 at 1080p to 91.4 at 1440p, a 33% decrease. At 4K, the average falls to 54.6 FPS, which is a 40% drop from 1440p and a massive 60% drop from 1080p. The gap between Low and High settings widens as resolution increases, suggesting that the GPU’s shading workload is scaling with both resolution and quality settings. At 4K High, the system is clearly GPU-limited, as the frame rate drops below the 60 FPS threshold that many players consider the minimum for smooth gameplay.

The Ultra preset tells the most extreme version of this story. At 1080p, the system manages 96.9 FPS, which is playable but significantly lower than the 194.8 FPS seen at Low. At 1440p, Ultra drops to 65.2 FPS, and at 4K, it collapses to 36.8 FPS. This is a 62% reduction from 1080p to 4K at Ultra settings. The data shows that the RTX 5070 does not have enough headroom to run Archeage at maximum settings in 4K, and even 1440p Ultra is borderline. The scaling pattern across all settings suggests that the GPU is the limiting factor at 4K, while at 1080p, the CPU’s performance is sufficient to feed the GPU without creating a significant bottleneck.

GPU Role

The NVIDIA GeForce RTX 5070 is built on the Blackwell 2.0 architecture with a GB205 chip manufactured on a 5 nm process. It carries 12 GB of GDDR7 memory on a 192-bit bus, delivering a bandwidth of 672.0 GB/s. The base clock is 2325 MHz with a boost clock of 2512 MHz, and the memory runs at 1750 MHz, which translates to 28 Gbps effective. With 6144 shading units, 192 TMUs, and 80 ROPs, the card is a substantial piece of silicon. Its FP32 performance is rated at 30.87 TFLOPS, and it supports DirectX 12 Ultimate, Vulkan 1.4, and OpenGL 4.6.

The 12 GB VRAM capacity is a key factor in Archeage’s performance at higher resolutions. While the measured FPS data does not directly indicate VRAM usage, the steep drop at 4K Ultra suggests that the memory bandwidth and capacity are being taxed heavily. The 672.0 GB/s bandwidth is substantial, but the combination of 4K resolution and Ultra settings likely pushes the GPU to its limits. The card’s pixel rate of 201.0 GPixel/s is high, yet the 36.8 FPS result at 4K Ultra shows that even this rate is insufficient for smooth gameplay in this specific title with these settings.

The RTX 5070’s benchmark scores are strong, with a Passmark G3D score of 29137 and a Geekbench OpenCL score of 185269. Its percentile ranking against all GPUs is 83, meaning it outperforms the vast majority of graphics cards on the market. However, its nearest rivals in the benchmark database include the AMD Radeon Pro 5300 and the NVIDIA GeForce RTX 3090, with delta percentages of 0.2% and 0.6% respectively. This puts the RTX 5070 in a performance class that is competitive with older flagship cards, but the measured Arcanege results show that it is not a card that can brute-force every scenario.

FAQ

Q: What is the best resolution for this CPU/GPU combo in Archeage?

A: The data shows that 2560x1440 at High settings provides a solid 91.4 FPS average, which is well above the 60 FPS threshold. At 1920x1080, the system can push much higher, with 136.8 FPS at High and 194.8 FPS at Low, making 1080p the best choice for high refresh rate monitors.

Q: Can this system handle 4K gaming in Archeage?

A: Yes, but only at lower settings. At 4K Low, the average FPS is 90.4, which is playable. At 4K Medium, it drops to 78.7 FPS, and at 4K High, it falls to 54.6 FPS. 4K Ultra is not viable, as the average is only 36.8 FPS.

Q: How much faster is the RTX 5070 compared to its nearest rival?

A: The benchmark data shows that the RTX 5070’s average score is 0.2% higher than the AMD Radeon Pro 5300 and 0.6% higher than the NVIDIA GeForce RTX 3090. These are very small margins, indicating that performance is nearly identical in synthetic tests.

Q: Does the Ryzen 7 5700X3D bottleneck the RTX 5070?

A: The CPU’s benchmark scores are strong, with a Cinebench R23 multicore score of 22366 and a single-core score of 3157. The 8-core, 16-thread configuration with a 96 MB shared L3 cache is well-suited for gaming. The measured FPS data does not show any signs of a CPU bottleneck at 1080p, as the system reaches 194.8 FPS at Low settings.

Q: What is the impact of the Ultra preset on performance?

A: The Ultra preset is significantly more demanding than High settings. At 1080p, the average FPS drops from 136.8 to 96.9, a 29% reduction. At 1440p, it drops from 91.4 to 65.2, a 29% reduction. At 4K, it drops from 54.6 to 36.8, a 33% reduction.

Settings Recommendations

The measured data provides a clear hierarchy of settings for this configuration. If the goal is maximum frame rate, the Low preset at 1080p delivers 194.8 FPS, which is ideal for competitive play or high refresh rate displays. However, the visual quality at Low is likely poor, and the Medium preset at 1080p offers 191.3 FPS, which is nearly identical in performance while presumably providing better visuals. This makes Medium at 1080p the best choice for players who want smooth gameplay without sacrificing too much visual fidelity.

For players using a 1440p monitor, the High preset is the sweet spot. It delivers 91.4 FPS, which is smooth and responsive, and it is a significant improvement over the Medium preset’s 133.5 FPS in terms of visual quality. The Ultra preset at 1440p drops to 65.2 FPS, which is still playable but leaves less headroom for demanding scenes. The data suggests that High at 1440p is the optimal balance between frame rate and visual quality.

At 4K, the options are more constrained. The Low preset at 90.4 FPS is the only setting that provides a comfortable margin above 60 FPS. Medium at 78.7 FPS is also acceptable, but High at 54.6 FPS is borderline, and Ultra at 36.8 FPS is not recommended for a smooth experience. Players with 4K displays should prioritize Low or Medium settings to maintain playability.

Measured FPS Breakdown

At 1920x1080, the measured average FPS values are 194.8 at Low, 191.3 at Medium, 136.8 at High, and 96.9 at Ultra. The gap between Low and Medium is minimal, but the jump to High costs about 28% of the frame rate. Ultra is significantly more demanding, costing another 29% compared to High.

At 2560x1440, the averages are 150.9 at Low, 133.5 at Medium, 91.4 at High, and 65.2 at Ultra. The drop from Low to Medium is about 12%, but the drop from Medium to High is much steeper at 32%. Ultra is again the most punishing, with a 29% reduction from High.

At 3840x2160, the averages are 90.4 at Low, 78.7 at Medium, 54.6 at High, and 36.8 at Ultra. The scaling is consistent, with each step up in settings costing a significant percentage of performance. The gap between High and Ultra is 33%, which is the largest relative drop across all resolutions.

CPU Role

The AMD Ryzen 7 5700X3D is a Zen 3 part built on the Vermeer architecture, manufactured on a 7 nm process by TSMC. It has 8 cores and 16 threads, with a base clock of 3.00 GHz and a boost clock of 4.10 GHz. The processor includes 64 KB of L1 cache per core, 512 KB of L2 cache per core, and a large 96 MB shared L3 cache. This cache configuration is particularly beneficial for gaming, as it reduces memory latency and improves performance in cache-sensitive workloads.

The CPU’s benchmark scores support its gaming credentials. It achieves a Cinebench R23 multicore score of 22366 and a single-core score of 3157. The 3DMark scores show scaling from 804 at single-thread to 6764 at 16 threads, which indicates strong multi-threading capability. The Passmark multithread score is 26318, and the single-thread score is 2970. These results place the CPU in the 82nd percentile of all CPUs, with an average benchmark score of 24673.

The nearest rivals for the 5700X3D are the Intel Core i7-1360P, AMD Ryzen 5 7600X3D, and Intel Core i5-11600, with delta percentages of 0.2%, 0.3%, and 0.5% respectively. This means the 5700X3D performs nearly identically to these parts in synthetic tests. In Archeage specifically, the measured FPS at 1080p Low reaches 194.8 FPS, which indicates that the CPU is capable of feeding the GPU with enough frames to avoid a bottleneck. At 4K, the CPU is less relevant, as the GPU becomes the limiting factor, but the 5700X3D’s strong single-thread performance ensures that it does not hold the system back at any resolution tested.