Archeage

The AMD Ryzen 7 5700X3D paired with the NVIDIA GeForce RTX 4070 SUPER delivers a fascinating performance profile in Archeage, one that shifts character dramatically depending on the resolution and graphics preset. The data reveals a system that is clearly capable of high refresh rates at lower resolutions, but which encounters a hard ceiling when pushed to 4K with maximum settings. This analysis breaks down the measured frame rates, the role of each component, and what the numbers imply about where the bottleneck truly lies.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The transition from 1080p to 1440p and then to 4K tells a clear story about the balance between the CPU and GPU in this configuration. At 1080p with Low settings, the combo achieves an average of 199.9 FPS, which is exceptionally high and suggests the CPU is doing the heavy lifting to feed frames. Moving to 1440p at the same Low preset, the average drops to 159.6 FPS — a decline of roughly 20%. This is a substantial hit, but the frame rate remains very playable and indicates the GPU is starting to take on more work, though the CPU is still keeping pace.

The jump from 1440p to 4K at Low settings is far more severe, with the average falling from 159.6 FPS to 88.4 FPS, a reduction of about 45%. This steep drop is a classic sign that the GPU is becoming the primary limiting factor at 4K, as the pixel count quadruples from 1080p and demands far more from the rasterizer and memory bandwidth. When comparing the scaling across all settings, the pattern holds: the percentage drop from 1080p to 4K is largest at the Ultra preset, where the average goes from 94.3 FPS down to 36.2 FPS, a decline of over 60%. This indicates that at Ultra settings, the GPU is not only handling resolution but also heavy shading and effects, pushing it to its limits.

Interestingly, the gap between 1080p and 1440p at Medium and High settings is relatively modest (e.g., 190.8 to 138.8 at Medium, a 27% drop), but the 1440p to 4K transition is consistently the most punishing. This suggests that the RTX 4070 SUPER has enough headroom to manage 1440p well, but 4K is a different beast. The data implies that for a smooth 4K experience, users must lower settings significantly, as even Medium at 4K yields only 79.2 FPS, while High drops to 56.2 FPS. The Ultra preset at 4K is nearly unplayable at 36.2 FPS, indicating that this game's Ultra settings are extremely demanding and likely not optimized for high-resolution gaming on this hardware.

FAQ

Q: What is the highest average frame rate achieved by this combo in Archeage?

A: The highest recorded average is 199.9 FPS at 1920x1080 with Low settings. This is the only measured configuration that breaks the 200 FPS barrier, though it comes close at Medium settings with 190.8 FPS.

Q: How does the Ultra preset perform at 1440p compared to 1080p?

A: At 2560x1440 with Ultra settings, the average frame rate is 64.6 FPS. This is significantly lower than the 94.3 FPS achieved at 1920x1080 with the same preset, representing a 31% reduction. The data shows that Ultra settings at 1440p are still playable but require a compromise on smoothness.

Q: Is the RTX 4070 SUPER capable of 4K gaming in Archeage?

A: Yes, but with caveats. At 4K with Low settings, the average is 88.4 FPS, which is very smooth. However, at High settings, it drops to 56.2 FPS, and at Ultra, it falls to 36.2 FPS, which is below the threshold for comfortable gameplay. The data suggests that 4K is viable only with lower presets.

Q: What is the performance difference between Low and Ultra at 1080p?

A: The difference is substantial. Low settings yield 199.9 FPS, while Ultra yields 94.3 FPS. This is a 53% reduction in frame rate, indicating that the Ultra preset imposes a heavy load on the GPU, likely due to advanced shading and post-processing effects.

Q: How does this combo rank among all tested configurations in Archeage?

A: The combo ranks 377th out of 1727 tested combos, placing it in the top 22% of all systems. This suggests it is a strong performer, but not at the very top tier, likely due to the CPU's age or the GPU's mid-range positioning.

Q: Which resolution provides the best balance of frame rate and visual quality?

A: Based on the data, 2560x1440 with High settings appears optimal, offering 93.7 FPS. This is a smooth experience that is close to the 144.1 FPS at 1080p High, but with a higher resolution that improves image clarity.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 7 5700X3D is an 8-core, 16-thread processor based on the Zen 3 architecture, with a base clock of 3.00 GHz and a boost clock of 4.10 GHz. Its most notable feature is the large 96 MB of shared L3 cache, which is a significant asset for MMORPGs like Archeage that often involve complex world states and many entities. The benchmark results show this CPU is no slouch: it scores 22,366 in Cinebench R23 multicore and 3,157 in single-core, which are solid numbers for a 2024 release. Its percentile rank of 82 against all CPUs indicates it outperforms a large majority of processors.

In the context of Archeage, the CPU's role is evident when looking at the 1080p Low results. At 199.9 FPS, the GPU is not the bottleneck; instead, the CPU's single-thread performance and large cache are what allow the game to run at such high frame rates. The 3D V-Cache technology (implied by the "X3D" suffix, though not explicitly stated in the pack) likely helps with the game's large data sets, reducing latency and improving frame pacing. However, the CPU's performance relative to its nearest rivals is interesting: it is only 0.2% ahead of the Intel Core i7-1360P and 0.3% ahead of the AMD Ryzen 5 7600X3D in average benchmark score. This suggests that while the 5700X3D is fast, it does not have a massive lead in raw compute, and its advantage in gaming likely comes from the cache hierarchy.

The data implies that at 1080p and Low settings, the CPU is the primary driver of performance, as the GPU has plenty of headroom. But as resolution increases and settings are raised, the GPU takes over as the limiting factor. The 8 cores and 16 threads are more than sufficient for Archeage, which likely does not scale well beyond a few threads, meaning the CPU's high single-core score is more important than its multicore capability. The single-core score of 3,157 in Cinebench R23 is particularly relevant, as it indicates strong per-thread performance that is crucial for the game's main logic loop.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured data provides a comprehensive look at how this combo performs across three resolutions and four settings levels. At 1920x1080, the frame rates are consistently high: Low averages 199.9 FPS, Medium 190.8 FPS, High 144.1 FPS, and Ultra 94.3 FPS. The step from Medium to High is the largest drop (24%), while the step from High to Ultra is also significant (35%), showing diminishing returns as settings increase. For 2560x1440, the averages are: Low at 159.6 FPS, Medium at 138.8 FPS, High at 93.7 FPS, and Ultra at 64.6 FPS. The drop from Medium to High at this resolution is notably steep (32%), which suggests that the High preset enables certain effects that are particularly taxing. At 3840x2160, the numbers fall sharply: Low averages 88.4 FPS, Medium 79.2 FPS, High 56.2 FPS, and Ultra 36.2 FPS. Here, the gap between Low and Medium is relatively small (10%), but the gap between High and Ultra is enormous (35%), indicating that Ultra at 4K is pushing the GPU to its absolute limit.

These numbers reveal that the combo performs best at 1080p, where even Ultra settings are playable at 94.3 FPS. At 1440p, the experience is still good, but the Ultra preset becomes marginal at 64.6 FPS. At 4K, only the Low and Medium presets offer acceptable frame rates, with High dipping below 60 FPS and Ultra struggling to maintain 40 FPS. The data also shows a consistent pattern: the relative performance drop from Low to Ultra becomes more severe as resolution increases. At 1080p, Ultra is 53% slower than Low; at 1440p, it is 60% slower; and at 4K, it is 59% slower. This indicates that the GPU's memory bandwidth and compute resources are being saturated at higher resolutions.

How This Combo Ranks — use comboRankInGame vs other tested combos

With a rank of 377 out of 1727 tested combos, this system sits comfortably in the upper quartile of all configurations tested in Archeage. This means it outperforms roughly 78% of all combos tested, which is a strong showing for a mid-to-high-end pairing. However, the rank also suggests there is room for improvement, as the top 376 combos outperform it, likely featuring more powerful GPUs like the RTX 4080 or 4090, or newer CPUs with higher clock speeds. The fact that this rank is based on actual measured data (dataIsMeasured is true) gives it credibility, indicating that the performance is not theoretical but observed in real-world testing.

The rank of 377 implies that for a 1080p or 1440p gamer, this combo is more than adequate, but for those seeking the absolute highest frame rates at 4K Ultra, it falls short. The CPU's performance relative to its nearest rivals (within 0.5% of the Intel Core i5-11600 and AMD Ryzen 5 7600X3D) suggests that the CPU is not the primary reason for the rank; rather, the GPU's capabilities are likely the deciding factor. The RTX 4070 SUPER's average benchmark score of 42,576 puts it just slightly below the NVIDIA RTX A6000 (by 0.2%) and the AMD Radeon RX 7650 GRE (by 0.3%), indicating it is a solid performer but not a flagship. This positioning is reflected in the game's rank, where it is fast enough for high refresh rates at lower resolutions but lacks the raw power for extreme 4K settings.

Settings Recommendations — which preset gives the best experience per the measured rows

Given the measured frame rates, the optimal settings depend on the user's target resolution and preference for smoothness versus visual quality. For 1080p, the High preset at 144.1 FPS is an excellent choice, offering a great balance between visual fidelity and speed. While Ultra provides more eye candy at 94.3 FPS, the drop is noticeable, and High is likely the sweet spot for competitive or fast-paced gameplay. For 1440p, the Medium preset at 138.8 FPS is the best option for high refresh rates, while High at 93.7 FPS is still excellent for those who prioritize visuals. Ultra at 64.6 FPS is playable but may feel slightly less smooth, so it is only recommended for slower-paced content or when a high refresh rate monitor is not the priority. For 4K, the data strongly suggests using Low settings (88.4 FPS) or Medium (79.2 FPS) to maintain a smooth experience. High at 56.2 FPS is borderline, and Ultra at 36.2 FPS is not recommended for most gameplay scenarios, as it will likely result in noticeable stutter and input lag.

The data also reveals that the Medium preset offers a compelling value in terms of performance per visual quality. At 1080p, it is only 4.5% slower than Low (190.8 vs 199.9 FPS), but at 1440p, it is 13% slower than Low (138.8 vs 159.6 FPS), and at 4K, it is 10% slower (79.2 vs 88.4 FPS). This suggests that Medium provides a significant visual upgrade over Low with a relatively small performance penalty, making it a strong recommendation for users who want better graphics without sacrificing frame rate. Conversely, the jump from High to Ultra is disproportionately costly, with a 35% drop in frame rate at 1080p and a 36% drop at 4K, making Ultra a poor choice unless the user has a high-end monitor that can take advantage of the extra fidelity.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 4070 SUPER is built on the Ada Lovelace architecture with a 5 nm process, featuring 12 GB of GDDR6X memory on a 192-bit bus, providing 504.2 GB/s of bandwidth. Its base clock is 1980 MHz with a boost clock of 2475 MHz, and it has 7168 shading units. These specifications point to a GPU that is well-suited for 1440p gaming and capable of 4K, but with limitations at the highest settings. The 12 GB of VRAM is sufficient for Archeage at all measured resolutions and settings, as the game likely does not exceed this amount even at 4K Ultra, given its 2014 release date. However, the memory bandwidth of 504.2 GB/s is a critical factor at 4K, where the large texture sets and high pixel count demand rapid data transfer.

The GPU's benchmark scores reflect its mid-high-end positioning: it scores 29,995 in PassMark G3D and 19,2684 in Geekbench OpenCL, with a percentile rank of 84 against all GPUs. Its performance relative to rivals is close, with the NVIDIA RTX A6000 being only 0.2% faster and the AMD Radeon RX 7650 GRE being 0.3% faster. This tight grouping suggests that the RTX 4070 SUPER is a well-balanced card that competes with professional and mid-range gaming cards. In Archeage, the GPU's role becomes dominant at 4K and at Ultra settings, where the frame rates drop dramatically. The 36.2 FPS at 4K Ultra indicates that the GPU's compute units are heavily taxed by the game's shader complexity, likely due to effects like ambient occlusion, shadows, and reflections.

The data suggests that the RTX 4070 SUPER is not a 4K Ultra card for this game, but it excels at 1080p and 1440p. The 56.2 FPS at 4K High is a clear sign that the GPU is the bottleneck, as the CPU is likely capable of more. The 88.4 FPS at 4K Low shows that when the GPU is not overburdened, it can still deliver high frame rates, but the scaling from Low to Ultra is non-linear, indicating that certain Ultra features are disproportionately expensive. The card's 220 W TDP and dual-slot design are typical for its class, but the data does not provide any thermal or power-related measurements, so the analysis must focus purely on the frame rates. Overall, the GPU's strength lies in its ability to deliver high frame rates at lower resolutions, while its weakness is exposed at 4K with maximum settings, where it falls below the 60 FPS threshold.