Archeage

The AMD Ryzen 7 5700G paired with the NVIDIA GeForce RTX 4080 delivers a playable experience in Archeage, but the data reveals a clear performance ceiling tied to the CPU. The combo ranks 341st out of 3708 tested configurations, placing it in the top 9% of all setups. This is a strong result, yet the benchmark numbers show that while the RTX 4080 is capable of massive frame rates at lower resolutions, the Ryzen 7 5700G holds the system back from reaching its full potential, particularly at 1080p where the GPU is left waiting for the processor to feed it data.

Resolution Scaling

The frame rate scaling from 1080p to 4K tells a definitive story about system balance. At 1080p with Low settings, the combo produces 218 FPS. Moving to 1440p Low drops this to 181 FPS, a 17% reduction. At 4K Low, the average falls to 104 FPS, which is a 52% drop from the 1080p result. This pattern is typical of a CPU-bound scenario at lower resolutions—the GPU has headroom to render more frames, but the processor cannot keep up with the demand.

The scaling becomes more pronounced when looking at Medium settings. At 1080p Medium, the system hits 210 FPS. At 1440p Medium, it drops to 161 FPS (a 23% decrease), and at 4K Medium, it falls to 92 FPS (a 56% decrease from 1080p). The fact that 1080p Medium (210 FPS) is nearly identical to 1080p Low (218 FPS) is a strong indicator that the CPU is the limiting factor at this resolution. The GPU is not being stressed by the graphical load; instead, the Ryzen 7 5700G's processing power is the bottleneck.

At 4K Ultra, the situation flips. The average FPS plummets to 43 FPS, a dramatic 61% drop from 4K High (63 FPS) and a 79% drop from 4K Low (104 FPS). This steep decline demonstrates that at 4K with maximum settings, the RTX 4080 becomes the primary constraint. The GPU is now fully saturated, and the massive graphical workload overwhelms its capabilities. The transition from CPU-bound at 1080p to GPU-bound at 4K Ultra is classic behavior for a high-end GPU paired with a mid-range processor.

The data shows that the sweet spot for this combination is around 1440p. At 1440p High, the system achieves 110 FPS, which is a 33% improvement over the 4K High result. The gap between 1440p High (110 FPS) and 1080p High (163 FPS) is 32%, suggesting that as resolution increases, the GPU work becomes more significant, but the CPU still has enough headroom to maintain solid performance. This makes 1440p the ideal balance point where neither component is severely underutilized.

CPU Role

The AMD Ryzen 7 5700G is an 8-core, 16-thread processor based on the Zen 3 architecture, running on the AMD Socket AM4 platform. Its base clock is 3.80 GHz with a boost clock of 4.60 GHz. In synthetic benchmarks, this CPU scores 12830.5 points in Cinebench R23 multi-core and 1494 points in single-core. The multi-threaded performance is respectable, but the single-core score is where the limitations become apparent for gaming.

Archeage, being an MMORPG, often relies heavily on single-thread performance for game logic, physics, and network processing. The Ryzen 7 5700G's single-core Cinebench R23 score of 1494 places it in the 79th percentile of all CPUs. For comparison, its nearest rival, the Intel Core i9-9900K, has an average benchmark score of 27097, which is only 0.2% higher than the Ryzen 7 5700G's 27051 average. This indicates that the 5700G is competitive with older high-end desktop chips, but it does not have the raw single-thread power of newer or more expensive processors.

The CPU's 16 MB of L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth provide adequate data throughput for most gaming scenarios. However, the 3DMark results show a significant scaling pattern: the 2-thread score is 1758, the 4-thread score is 3389, the 8-thread score is 5648, and the max-thread score is 6627. This scaling shows that the processor benefits from additional cores, but the gains diminish after 8 threads. For Archeage, which may not fully utilize all 16 threads, the performance will depend heavily on the first few cores' efficiency.

The benchmark results confirm that at 1080p, the CPU is the bottleneck. The fact that 1080p Low (218 FPS) and 1080p Medium (210 FPS) are so close suggests that the CPU is maxed out and cannot push higher frame rates regardless of graphical settings. This is a classic sign of processor limitation. The Ryzen 7 5700G's 8 cores and 16 threads are sufficient for the game's multi-threaded aspects, but its single-thread performance caps the maximum achievable FPS.

FAQ

Q: What is the best resolution to play Archeage with this CPU and GPU combo?

A: The data shows that 2560x1440 is the sweet spot. At 1440p High, the combo achieves 110 FPS, which is a 33% improvement over 4K High (63 FPS). This resolution provides a good balance where the GPU is adequately utilized without the CPU becoming a severe bottleneck.

Q: Is the RTX 4080 being held back by the Ryzen 7 5700G?

A: Yes, particularly at 1080p. The difference between 1080p Low (218 FPS) and 1080p Medium (210 FPS) is only 3.7%, indicating the CPU is the limiting factor. The GPU has more headroom, but the processor cannot deliver frames fast enough.

Q: How does this combo perform at 4K Ultra settings?

A: Poorly. The average FPS at 4K Ultra is only 43 FPS, which is a 31% drop from 4K High (63 FPS). This indicates that the RTX 4080 is overwhelmed by the graphical load at this resolution and settings combination.

Q: What is the maximum frame rate this combo can achieve?

A: The highest recorded average FPS is 218 at 1080p Low settings. However, this is CPU-limited, as dropping to Medium settings only reduces the average to 210 FPS.

Q: How does the Ryzen 7 5700G compare to its closest rival in terms of overall CPU performance?

A: The Intel Core i9-9900K has an average benchmark score of 27097, which is 0.2% higher than the Ryzen 7 5700G's 27051. This means the two processors are effectively tied in overall performance.

Q: Is this combo better suited for high refresh rate gaming or 4K gaming?

A: The data indicates it is better for high refresh rate gaming at 1440p. The combo hits 161 FPS at 1440p Medium, which exceeds 144Hz refresh rates. At 4K, the performance is below 100 FPS for most settings, making it less ideal for high refresh rate 4K monitors.

How This Combo Ranks

The AMD Ryzen 7 5700G + NVIDIA GeForce RTX 4080 combination ranks 341st out of 3708 tested combos in Archeage. This places it in the top 9.2% of all tested systems, which is an excellent result. The high ranking is driven primarily by the RTX 4080's raw power, but the CPU's mid-range performance prevents the combo from reaching the top tiers.

To contextualize this ranking, consider that the RTX 4080 alone sits in the 86th percentile of all GPUs, with an average benchmark score of 54247. Its closest rival, the RTX 4080 SUPER, scores 54209, a mere 0.1% difference. The Ryzen 7 5700G sits in the 79th percentile of all CPUs, with an average score of 27051. The combination of a top-tier GPU with a mid-tier CPU results in a system that is better than most but not at the absolute peak.

The ranking gap is notable when compared to the GPU's standalone performance. The GPU is in the top 14% of all GPUs, but the combo is only in the top 9% of all combos. This discrepancy suggests that other combos with slightly weaker GPUs but much stronger CPUs can outperform this setup in Archeage, which is particularly sensitive to CPU performance. The data suggests that this combo is well-balanced for 1440p gaming, but the CPU's single-thread limitations hold it back from being a top-tier 1080p performer.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the user's resolution and refresh rate priorities. For 4K gaming, the best experience is achieved at Low settings, which produces 104 FPS. This is a massive 65% improvement over Ultra settings (43 FPS) and a 40% improvement over High settings (63 FPS). While Low settings will reduce visual fidelity, the frame rate jump is substantial and makes the game far more playable on a 4K display.

For 1440p gaming, High settings provide the best balance of visual quality and performance at 110 FPS. This is nearly double the 4K High result and offers a smooth experience on most 1440p monitors. Medium settings at 1440p yield 161 FPS, which is ideal for 165Hz or 144Hz displays, but the visual quality difference between Medium and High is often significant in an MMORPG like Archeage.

For 1080p gaming, the data shows that the CPU is the bottleneck. The difference between Low (218 FPS) and Medium (210 FPS) is minimal, but Medium offers better visuals. High settings drop to 163 FPS, which is still excellent for 144Hz monitors. Ultra settings at 1080p yield 111 FPS, which is a 32% drop from High. Given the CPU limitation, players should prioritize Medium or High settings at 1080p, as the extra graphical load of Ultra does not justify the frame rate loss.

The measured data strongly suggests that 1440p High is the recommended configuration for most users. It delivers 110 FPS, which is smooth, and the visual quality is superior to 1080p. The frame rate is 75% higher than 4K High, and the image quality difference between 1440p and 4K is often less noticeable in a fast-paced MMORPG than the frame rate difference.

Measured FPS Breakdown

The following table presents the exact measured average frame rates for all tested resolution and settings combinations:

| Resolution | Settings | Avg FPS | Min FPS | Max FPS |

|------------|----------|---------|---------|---------|

| 3840x2160 | High | 63 | - | - |

| 3840x2160 | Low | 104 | - | - |

| 3840x2160 | Medium | 92 | 79 | 106 |

| 3840x2160 | Ultra | 43 | - | - |

| 2560x1440 | High | 110 | - | - |

| 2560x1440 | Low | 181 | - | - |

| 2560x1440 | Medium | 161 | 137 | 186 |

| 2560x1440 | Ultra | 75 | - | - |

| 1920x1080 | High | 163 | - | - |

| 1920x1080 | Low | 218 | - | - |

| 1920x1080 | Medium | 210 | 178 | 241 |

| 1920x1080 | Ultra | 111 | - | - |

At 4K, the progression from Low to Ultra shows a clear degradation: 104, 92, 63, then 43 FPS. The step from High to Ultra is the most severe, with a 32% drop in performance. The Medium settings at 4K show a minimum FPS of 79, which indicates some frame pacing instability, but the average of 92 FPS is still playable.

At 1440p, the data reveals a similar pattern: 181, 161, 110, and 75 FPS for Low, Medium, High, and Ultra respectively. The gap between Medium and High is 31%, and between High and Ultra is 32%. The Medium settings at 1440p have a minimum of 137 FPS, which is above the 60 FPS threshold, ensuring a consistently smooth experience.

At 1080p, the frame rates are exceptionally high. Low (218 FPS), Medium (210 FPS), and High (163 FPS) all exceed 144 FPS, catering to high refresh rate monitors. The Ultra setting drops to 111 FPS, which is still above 60 FPS but represents a significant 32% performance penalty compared to High. The Medium settings at 1080p show a maximum FPS of 241, indicating the system can push very high frame rates when the CPU is not the limiting factor.