Archeage

# Archeage Performance Analysis: AMD Ryzen 5 7500F + AMD Radeon RX 9070 XT

The benchmark data for Archeage with the AMD Ryzen 5 7500F and AMD Radeon RX 9070 XT reveals a combination that scales predictably across resolutions, with the GPU acting as the primary bottleneck at higher settings. This pairing—a 6-core Zen 4 processor with a 16 GB RDNA 4 graphics card—delivers playable frame rates at 1440p, but the measured results show significant performance cliffs when pushing to 4K Ultra. The data set includes 12 measured FPS rows across three resolutions and four settings presets, providing a complete picture of how this system behaves in this 2014 MMORPG.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent across all settings, revealing a system that transitions from CPU-bound at lower resolutions to heavily GPU-bound at 4K. At Low settings, the average frame rate falls from 210 FPS at 1920x1080 to 142 FPS at 2560x1440, then to 81 FPS at 3840x2160—a total reduction of 61.4% from 1080p to 4K. This scaling pattern suggests that at 1080p Low, the Ryzen 5 7500F is likely limiting performance, as the RX 9070 XT should theoretically handle far more than 210 FPS in a 2014 title.

The Medium preset shows a similar trajectory: 187 FPS at 1080p, 126 FPS at 1440p, and 72 FPS at 4K. The percentage drops between resolutions are 32.6% from 1080p to 1440p, and 42.9% from 1440p to 4K. This non-linear scaling indicates that the GPU's compute resources are being progressively saturated as pixel count increases, with the 4K resolution representing a 2.25x increase in pixels over 1440p.

High settings follow the expected pattern with 127 FPS at 1080p, 86 FPS at 1440p, and 49 FPS at 4K. The 4K result here is notably below the 60 FPS threshold, suggesting that High settings at 4K are too demanding for this combination in Archeage. Ultra settings show the most dramatic scaling: 87 FPS at 1080p, 58 FPS at 1440p, and just 33 FPS at 4K. The 4K Ultra result represents a 62.1% drop from the 1080p Ultra score, and the 33 FPS average is barely playable for most users.

The data implies that the limiting component shifts depending on resolution. At 1080p, the 6-core/12-thread Ryzen 5 7500F with its 5.00 GHz boost clock likely becomes the ceiling, particularly at Low settings where the GPU has headroom. As resolution increases, the RX 9070 XT's 16 GB of GDDR6 memory and 644.6 GB/s bandwidth become the determining factors, with the GPU's 4096 shading units struggling to maintain high frame rates at 4K Ultra.

GPU Role

The AMD Radeon RX 9070 XT plays a dominant role in this combo's Archeage performance, particularly at higher resolutions and settings. With 16 GB of GDDR6 memory on a 256-bit bus, the card offers substantial memory capacity for a 2014 MMORPG, but the 4K Ultra result of 33 FPS suggests that memory bandwidth or compute throughput becomes a limiting factor rather than capacity. The card's 48.66 TFLOPS FP32 performance and 380.2 GPixel/s pixel rate are theoretically sufficient for older titles, yet the measured data shows the RX 9070 XT struggling at 4K with demanding settings.

The GPU's clock behavior is worth noting: the base clock of 1660 MHz, game clock of 2400 MHz, and boost clock of 2970 MHz indicate a wide dynamic range. The 304 W TDP and dual 8-pin power connectors suggest this card is designed for sustained high performance, but the benchmark scores paint a different picture. The RX 9070 XT ranks in the 55th percentile among all GPUs, with an average benchmark score of 13543—a modest ranking that places it near older cards like the NVIDIA GeForce GTX 570 in the nearestRivals data.

The VRAM allocation appears sufficient for Archeage at all tested settings, as the game's 2014 release date predates modern memory-hungry textures. However, the performance difference between Low and Ultra settings at 4K (81 FPS vs 33 FPS) indicates that the GPU's shading units and texture units are heavily taxed by the Ultra preset's additional effects. At 1080p, the GPU's role diminishes, as evidenced by the 210 FPS Low result—a score that likely approaches the CPU's gameplay limit in this MMORPG.

Benchmark results show the RX 9070 XT achieving a passmark G3D score of 26795 and a Geekbench Vulkan score of 65879. These synthetic benchmarks confirm the card's mid-range positioning, which aligns with its 55th percentile ranking. The GPU's 64 RT cores and DirectX 12 Ultimate support are largely irrelevant for Archeage, but the 128 ROPs and 256 TMUs directly impact rasterization performance at 4K.

FAQ

Q: Why does the FPS drop so dramatically between 1440p and 4K?

A: The data shows an average FPS reduction of approximately 43% across all settings when moving from 2560x1440 to 3840x2160. This aligns with the 2.25x increase in pixel count, indicating the RX 9070 XT's rendering throughput becomes the limiting factor at 4K, particularly at Medium settings where FPS drops from 126 to 72.

Q: Is the Ryzen 5 7500F bottlenecking the RX 9070 XT in Archeage?

A: At 1080p Low, the 210 FPS result suggests the CPU may be limiting performance, as the GPU's 55th percentile ranking implies it could render more frames. However, at 4K, the GPU is clearly the bottleneck, with the CPU's 6 cores and 12 threads providing sufficient headroom for the 33-81 FPS range observed.

Q: What is the best settings preset for 1440p gaming?

A: The High preset at 2560x1440 delivers 86 FPS average, which is above the 60 FPS target. Medium at 1440p provides 126 FPS with a minimum of 107 FPS, making it the highest settings option that maintains a comfortable margin above 60 FPS.

Q: How does this combo rank among all tested combinations for Archeage?

A: The combination ranks 893rd out of 3708 tested combos, placing it in the top 24.1% of all configurations. This ranking reflects solid mid-tier performance suitable for most gameplay scenarios.

Q: Can this system handle 4K Ultra settings?

A: No, the 4K Ultra result of 33 FPS average is below playable thresholds. The 4K High preset at 49 FPS is also marginal, while 4K Medium at 72 FPS represents the practical ceiling for smooth gameplay at this resolution.

Q: Why does the Low preset at 4K achieve 81 FPS but Ultra only 33 FPS?

A: The 2.45x difference between Low and Ultra at 4K indicates that the Ultra preset's additional rendering features—likely shadow quality, draw distance, and post-processing effects—heavily tax the RX 9070 XT's 4096 shading units and 256 TMUs, whereas Low settings reduce the per-pixel workload dramatically.

Settings Recommendations

The measured data indicates that Medium settings provide the best balance of visual quality and performance for this combo. At 1920x1080, Medium delivers 187 FPS average with a minimum of 159 FPS and maximum of 215 FPS—a tightly clustered result that suggests consistent frame pacing. The 1440p Medium result of 126 FPS average (107 min, 145 max) offers smooth gameplay on high-refresh-rate displays, while the 4K Medium average of 72 FPS (61 min, 83 max) remains playable on standard 60 Hz monitors.

High settings represent a reasonable alternative for users prioritizing visual fidelity. At 1080p, High achieves 127 FPS, which is still well above 60 FPS. The 1440p High result of 86 FPS provides a comfortable margin for most displays, but the 4K High score of 49 FPS falls short of smooth gameplay standards. Ultra settings are only viable at 1080p, where the 87 FPS average barely exceeds the 60 FPS threshold, while 1440p Ultra at 58 FPS and 4K Ultra at 33 FPS are not recommended for consistent gameplay.

Low settings are unnecessary for this hardware combination at 1080p or 1440p, given the high frame rates achieved at Medium. However, at 4K, Low settings at 81 FPS might appeal to users who prioritize frame rate over visual quality on 4K displays. The minimal FPS data for Low and High presets is absent from the measured results, but the Medium preset's minimum values (159 FPS at 1080p, 107 FPS at 1440p, 61 FPS at 4K) suggest that Medium provides the best worst-case performance across all resolutions.

How This Combo Ranks

The combo rank of 893 out of 3708 tested combinations places this system in the top quartile of all configurations tested for Archeage. This ranking reflects a balanced pairing where neither component is drastically mismatched for the game's requirements. The Ryzen 5 7500F's 77th percentile ranking among all CPUs (average benchmark score 24964) and the RX 9070 XT's 55th percentile GPU ranking (average score 13543) combine to produce a system that performs above the median for this specific title.

The CPU's nearest rivals provide context for its performance tier. The Intel Core i7-11850H scores 24935 (0.1% higher), the AMD Ryzen 5 8400F scores 25005 (0.2% lower delta), and the Intel Core i7-13620H scores 24911 (0.2% higher). These margins are negligible, indicating the Ryzen 5 7500F sits at a performance plateau shared by several competing processors. The GPU's nearest rivals are substantially older cards—the AMD Radeon HD 7770M (0.1% higher), NVIDIA GeForce GTX 570 (0.2% higher), and NVIDIA P106-090 (0.5% higher)—which highlights the RX 9070 XT's unusual benchmark positioning relative to its modern architecture.

Among the 3708 tested combos, the 893rd rank suggests that while this system performs well, numerous combinations with higher-end GPUs or CPUs achieve better Archeage performance. The ranking also implies that the RX 9070 XT's modest percentile ranking (55th) tempers the overall combo position, as the CPU's stronger 77th percentile ranking cannot fully compensate for the GPU's mid-tier standing in the broader benchmark database.

Measured FPS Breakdown

The complete measured frame rate data for this combo in Archeage is as follows:

At 3840x2160, the Ultra preset achieves 33 FPS average with no recorded minimum or maximum values. The High preset delivers 49 FPS average, also without min/max data. Medium provides 72 FPS average with a minimum of 61 FPS and maximum of 83 FPS. Low settings achieve 81 FPS average with no min/max recorded. This resolution shows the widest spread between settings, ranging from 33 to 81 FPS.

At 2560x1440, Ultra averages 58 FPS with no min/max data. High settings reach 86 FPS average, again without recorded bounds. Medium delivers 126 FPS average with a minimum of 107 FPS and maximum of 145 FPS. Low settings achieve 142 FPS average. The 1440p results show a tighter range of 58 to 142 FPS across settings, with the gap between Medium and Low narrowing to just 16 FPS.

At 1920x1080, Ultra averages 87 FPS with no min/max data. High settings achieve 127 FPS average. Medium delivers 187 FPS average with a minimum of 159 FPS and maximum of 215 FPS. Low settings reach 210 FPS average. The 1080p results span from 87 to 210 FPS, with Medium and Low nearly converging at 187 and 210 FPS respectively.

The Medium preset is the only one with complete min/max data across all three resolutions, providing the most reliable frame pacing information. The consistency of these ranges (159-215 at 1080p, 107-145 at 1440p, 61-83 at 4K) suggests that Medium settings produce stable frame delivery without significant stuttering or spikes.

CPU Role

The AMD Ryzen 5 7500F contributes to Archeage performance through its 6 cores and 12 threads, operating at a base clock of 3.70 GHz with a boost clock of 5.00 GHz. This Zen 4 architecture processor, built on TSMC's 5 nm process, features 32 MB of shared L3 cache and supports DDR5 memory with a dual-channel configuration providing 83.2 GB/s bandwidth. The CPU's 65 W TDP and unlocked multiplier indicate an efficient, overclockable design that maintains high single-thread performance.

The CPU's benchmark results show strong multi-threaded capabilities: Cinebench R23 multicore scores 22799, Geekbench multicore reaches 12362, and Passmark multithread achieves 26825. Single-thread performance is equally notable, with Cinebench R23 singlecore at 3218, Geekbench singlecore at 2374, and Passmark singlethread at 3841. These scores position the Ryzen 5 7500F in the 77th percentile among all CPUs, with an average benchmark score of 24964.

In Archeage, the CPU's role becomes evident at lower resolutions and settings. The 1080p Low result of 210 FPS likely approaches the game's engine limit for this processor, as the RX 9070 XT's performance headroom suggests it could render more frames if the CPU could feed it faster. The 3DMark scores provide additional context: single-thread score of 974, 2-thread score of 1902, 4-thread score of 3621, and 8-thread score of 5372. These results indicate that Archeage, which typically relies on a few threads for game logic and rendering commands, benefits from the CPU's strong single-thread performance.

The memory bandwidth of 83.2 GB/s and 32 MB L3 cache help maintain smooth frame delivery in busy MMORPG environments with many players and NPCs. The CPU's nearest rivals—all scoring within 0.4% of the 7500F's average—confirm that this processor delivers performance comparable to several Intel and AMD alternatives, making it a solid foundation for this game. At 4K resolutions, the CPU's influence diminishes as the GPU becomes the primary bottleneck, but at 1080p with lower settings, the Ryzen 5 7500F's 5.00 GHz boost clock and 12 threads provide the computational headroom needed for high frame rates.