Archeage

The AMD Ryzen 5 2600 paired with the NVIDIA GeForce RTX 4070 delivers playable frame rates across most of ArcheAge’s settings, but the data exposes a clear pattern: at 4K Ultra, the combo falls to 34.6 FPS, while at 1080p Low it reaches 148.6 FPS. The scaling curve suggests that the CPU becomes a limiting factor at lower resolutions, whereas the GPU dominates the workload at 4K. This analysis breaks down the measured results, contextualizes the combo’s ranking, and offers concrete settings guidance based solely on the provided numbers.

Resolution Scaling

The measured FPS drops sharply as resolution increases, but the magnitude of that drop depends heavily on the chosen preset. At Low settings, the transition from 1920x1080 (148.6 FPS) to 2560x1440 (128.4 FPS) is a modest 13.6% reduction, and then to 3840x2160 (82.4 FPS) a further 35.8% drop. This progressive decline indicates that at Low, the RTX 4070 still has headroom at 1080p and 1440p, with the CPU likely capping performance until the GPU becomes the bottleneck at 4K.

At Medium settings, the pattern shifts: 1080p delivers 145.7 FPS, 1440p nearly matches at 127.6 FPS, but 4K falls to 73.6 FPS. The small gap between 1080p and 1440p (18.1 FPS) suggests that the Ryzen 5 2600’s six cores are keeping up at both resolutions, while the 4K result reflects the GPU’s rendering load. High settings show a steeper decline: 122.3 FPS at 1080p, 86.6 FPS at 1440p, and 48.2 FPS at 4K—a 60.6% reduction from 1080p to 4K, indicating that the GPU is the primary limiter here.

Ultra settings amplify this trend dramatically. The combo manages 89.7 FPS at 1080p, drops to 57.5 FPS at 1440p, and collapses to 34.6 FPS at 4K. The 4K Ultra figure is barely above playable thresholds, and the scaling from 1440p to 4K (a 39.8% drop) shows that the RTX 4070’s 12 GB GDDR6X memory and 504.2 GB/s bandwidth are insufficient for ArcheAge’s heaviest preset at that resolution. Overall, the data indicates that between 1080p and 1440p, the CPU’s single-thread performance (Cinebench R23 single-core score of 1579) becomes a factor at Low and Medium, while at High and Ultra, the GPU’s 29.15 TFLOPS FP32 throughput dictates the frame rate ceiling.

How This Combo Ranks

Among 1,727 tested combos for ArcheAge, this pairing holds rank 618. That places it in the upper third of all configurations, but not near the top. The Ryzen 5 2600 itself sits at the 77th percentile among all CPUs, with an average benchmark score of 19,616. Its nearest rivals include the Intel Core i5-1345U (19,691, delta -0.4%), the AMD Ryzen 5 7530U (19,508, delta 0.6%), and the Intel Core i5-11600KF (19,740, delta -0.6%). These sub-1% deltas mean the CPU’s performance is effectively interchangeable with several modern laptop and desktop chips, which explains why the combo’s rank is not higher.

The GPU, meanwhile, is far more competitive. The RTX 4070 achieves an 81st percentile ranking among all GPUs, with an average benchmark score of 37,283. Its nearest rivals are the AMD Radeon RX Vega 56 (37,507, delta -0.6%), the NVIDIA GeForce MX570 A (38,008, delta -1.9%), and the NVIDIA GeForce RTX 4080 Mobile (38,135, delta -2.2%). The RTX 4070 trails the RTX 4080 Mobile by only 2.2% in average score, yet that mobile chip is designed for laptops, making the desktop card’s performance notable. For ArcheAge specifically, the combo’s rank of 618 out of 1,727 suggests that while the GPU is strong, the older CPU holds the pairing back in CPU-bound scenarios, particularly at 1080p Low and Medium where FPS is high but not maximal.

GPU Role

The RTX 4070’s specifications directly explain its behavior in ArcheAge. With 5,888 shading units, 184 texture mapping units, and 64 ROPs, the card is built for high-throughput rendering. Its boost clock of 2475 MHz and base clock of 1920 MHz provide the raw speed needed for the game’s draw calls. The 12 GB GDDR6X memory on a 192-bit bus delivers 504.2 GB/s of bandwidth, which is ample for 1080p and 1440p but strained at 4K Ultra, where the 34.6 FPS result reflects memory pressure and pixel fill rate limits.

The card’s 158.4 GPixel/s pixel rate and 455.4 GTexel/s texture rate are high, yet ArcheAge’s Ultra preset at 4K demands more than the GPU can sustain. In contrast, at 1080p Low, the GPU is barely taxed—148.6 FPS shows that the card is not the bottleneck. The PassMark G3D score of 26,927 and DirectX 12 score of 103 reinforce that the GPU excels in modern APIs, but ArcheAge’s older engine (released in 2014) may not fully utilize the Ada Lovelace architecture’s features, such as the 46 RT cores or 184 tensor cores. Instead, the game relies on raw rasterization, where the RTX 4070’s FP32 throughput of 29.15 TFLOPS carries the load. The data shows that the GPU dominates performance at 4K across all settings, with the delta between Low (82.4 FPS) and High (48.2 FPS) at that resolution being 34.2 FPS—a clear sign that GPU compute is the limiting factor.

Measured FPS Breakdown

At 1920x1080, the combo delivers strong results across all presets. Low settings yield 148.6 FPS, Medium 145.7 FPS, High 122.3 FPS, and Ultra 89.7 FPS. The gap between Low and Ultra is 58.9 FPS, showing that even the heaviest preset remains highly playable. The small difference between Low and Medium (2.9 FPS) suggests that the CPU’s six cores (12 threads, base clock 3.40 GHz, boost 3.90 GHz) are sufficient to feed the GPU at these settings.

Moving to 2560x1440, the results remain solid but show more variation. Low hits 128.4 FPS, Medium 127.6 FPS, High 86.6 FPS, and Ultra 57.5 FPS. The Medium and Low results are nearly identical (0.8 FPS apart), indicating that the GPU is not yet saturated. High drops sharply from Medium (41 FPS difference), and Ultra falls further, suggesting that the increased shading complexity at 1440p begins to tax the RTX 4070’s 64 ROPs.

At 3840x2160, the picture changes entirely. Low manages 82.4 FPS, Medium 73.6 FPS, High 48.2 FPS, and Ultra 34.6 FPS. The Ultra figure is below the 60 FPS threshold many players target, and even High is borderline. The scaling from 1080p to 4K is steepest at Ultra (89.7 to 34.6 FPS, a 61.4% drop), while Low only loses 44.6% (148.6 to 82.4 FPS). This indicates that the GPU’s memory bandwidth and pixel rate are the primary constraints at 4K, not the CPU.

FAQ

Q: What is the best resolution for this combo in ArcheAge?

A: The data shows 2560x1440 as the sweet spot. At Medium, it delivers 127.6 FPS, and at High, 86.6 FPS, both well above playable levels. 4K is playable only at Low (82.4 FPS) or Medium (73.6 FPS), but High and Ultra fall to 48.2 and 34.6 FPS, respectively.

Q: How does the RTX 4070 compare to its nearest GPU rival?

A: The RTX 4070 has an average benchmark score of 37,283, which is 2.2% lower than the NVIDIA GeForce RTX 4080 Mobile (38,135) and 0.6% lower than the AMD Radeon RX Vega 56 (37,507). It outperforms the AMD Radeon RX 5300M (36,371) by 2.5%.

Q: Is the Ryzen 5 2600 a bottleneck at 1080p?

A: At 1080p Low (148.6 FPS) and Medium (145.7 FPS), the CPU’s single-thread score (Cinebench R23 single-core 1579) appears to cap performance, as the GPU could likely push higher. At High (122.3 FPS) and Ultra (89.7 FPS), the GPU becomes the limiting factor.

Q: What is the combo’s rank in ArcheAge?

A: It ranks 618 out of 1,727 tested combos. This places it in the upper third, but the CPU’s 77th percentile standing (average score 19,616) drags the pairing down relative to combos with newer processors.

Q: How much FPS is lost going from 1080p to 4K at Ultra?

A: At Ultra, the drop is from 89.7 FPS at 1920x1080 to 34.6 FPS at 3840x2160, a 61.4% reduction. This is the largest percentage loss across all settings, confirming the GPU is the primary bottleneck at 4K Ultra.

Q: Does the RTX 4070’s memory size affect 4K performance?

A: The 12 GB GDDR6X memory with 504.2 GB/s bandwidth is sufficient for 4K Low and Medium (82.4 and 73.6 FPS), but at High and Ultra, the card’s 158.4 GPixel/s pixel rate becomes the constraint, not necessarily capacity.

CPU Role

The Ryzen 5 2600 is a 6-core, 12-thread processor based on the Zen architecture, fabricated on a 12 nm process. Its base clock of 3.40 GHz and boost clock of 3.90 GHz are modest by modern standards, and its Cinebench R23 scores (11,186 multi-core, 1,579 single-core) reflect that. The PassMark single-thread score of 2,239 is low compared to newer CPUs, and this directly impacts ArcheAge’s performance at low resolutions where the CPU must feed the GPU rapidly.

In the measured data, the CPU’s influence is most visible at 1080p. At Low (148.6 FPS) and Medium (145.7 FPS), the frame rates are nearly identical, suggesting the GPU is waiting on the CPU to issue draw calls. The multi-core score of 11,186 in Cinebench R23 indicates that the six cores handle the game’s background tasks, but single-thread performance limits peak FPS. At 1440p, the CPU still manages to keep up at Low (128.4 FPS) and Medium (127.6 FPS), but at High and Ultra, the GPU’s workload increases, and the CPU’s role diminishes.

The CPU’s 16 MB shared L3 cache and 46.9 GB/s memory bandwidth are adequate for ArcheAge’s world, but the lack of a higher boost clock (3.90 GHz) means that in crowded scenes, the frame rate may dip. The nearest rival, the Intel Core i5-11600KF, has an average score of 19,740, just 0.6% higher, so the Ryzen 5 2600 is not dramatically behind. However, the gap between this CPU and top-tier processors is significant, and the combo’s rank of 618 reflects that.

Settings Recommendations

For the best balance of visual quality and performance, the data supports using Medium settings at 2560x1440. This preset yields 127.6 FPS, which is 39.7 FPS higher than High (86.6 FPS) and only 0.8 FPS lower than Low (128.4 FPS). The visual upgrade from Low to Medium is substantial, and the frame rate penalty is negligible, making Medium the clear choice for 1440p users.

At 1920x1080, High settings (122.3 FPS) offer a strong experience, but Ultra (89.7 FPS) is still above 60 FPS and provides the best visual fidelity. Given the small gap between Medium (145.7 FPS) and High (122.3 FPS), players with 60 Hz monitors can comfortably select Ultra. For those seeking maximum smoothness, Low at 148.6 FPS is the top choice