Archeage

The AMD Ryzen 5 5600X and NVIDIA GeForce RTX 4070 combination delivers a highly playable Archeage experience across most settings, yet the data reveals a sharp performance cliff at Ultra presets that deserves closer inspection. The measured frames per second (FPS) numbers show a clear pattern: this MMORPG scales dramatically with graphics settings, but the relationship between resolution and frame rate suggests the GPU becomes the limiting factor only at higher pixel counts, while lower resolutions expose a different bottleneck.

Resolution Scaling

The FPS drop from 1080p to 4K is steep but uneven across settings. At Low settings, the average FPS falls from 208.9 at 1920x1080 to 80 at 3840x2160, a reduction of 128.9 FPS or roughly 62%. Medium settings show a similar proportional decline, dropping from 190.4 to 70.7 FPS between the same resolutions. High settings see the average go from 127.1 at 1080p down to 50.8 at 4K, while Ultra falls from 85.1 to 34.1 FPS.

The most telling observation is that the gap between 1080p and 1440p is relatively modest for every preset. At High settings, the drop from 127.1 to 86.4 FPS represents a 32% reduction, while moving from 1440p to 4K only loses another 41% of the remaining performance. This pattern indicates that at 1080p, the CPU or some other system component may be preventing the GPU from reaching its full potential, because the jump to 1440p does not halve the frame rate as pixel count increases by 78%. The data implies that Archeage at 1080p is not purely GPU-bound, especially at lower settings where the RTX 4070 can render frames faster than the rest of the system can feed it.

At 4K, the situation reverses. Ultra settings produce only 34.1 FPS, which is below the 50.8 FPS achieved at High. The scaling factor from 1440p to 4K at Ultra is 34.1 divided by 55.6, or 0.61, which is close to the expected pixel-count ratio of 0.56. This suggests that at 4K Ultra, the GPU is the primary limiting component, and the frame rate is constrained by the rendering workload rather than any CPU bottleneck.

GPU Role

The RTX 4070’s specifications provide context for these results. The GPU features 12 GB of GDDR6X memory on a 192-bit bus, yielding a bandwidth of 504.2 GB/s. Its boost clock is 2475 MHz, and it has 5888 shading units, 184 texture mapping units, and 64 raster output pipelines. The memory clock runs at 1313 MHz with 21 Gbps effective speed. These figures suggest a card that should handle 1440p gaming comfortably, and the measured FPS at 1440p High (86.4) and Medium (126.9) supports that assumption.

The VRAM capacity is not stressed by Archeage at these settings, as the game’s 2014 release date predates the massive texture requirements of modern titles. The data shows no unusual performance collapse that would indicate memory overflow. Instead, the GPU’s raw compute power appears to be the determining factor at 4K, where even Low settings only reach 80 FPS. The difference between 4K Low (80 FPS) and 4K Medium (70.7 FPS) is just 9.3 FPS, while the jump from Medium to High costs another 19.9 FPS. This nonlinear scaling hints that certain rendering features enabled at High have a disproportionate impact on the GPU’s workload.

The RTX 4070 sits at the 81st percentile among all GPUs in the database, with an average benchmark score of 37283. Its nearest rival, the AMD Radeon RX Vega 56, scores 37507, a delta of -0.6%, meaning the RTX 4070 is essentially tied with that older card in synthetic benchmarks. However, in actual Archeage gameplay, the RTX 4070’s modern architecture likely provides better driver optimization, though the measured data cannot confirm this directly.

FAQ

Q: What is the highest average FPS recorded for this combo in Archeage?

A: The highest measured average FPS is 208.9, achieved at 1920x1080 resolution with Low settings.

Q: How does Ultra settings performance compare between 1080p and 4K?

A: At 1920x1080 Ultra, the average FPS is 85.1, while at 3840x2160 Ultra, it drops to 34.1, a reduction of 51 FPS or 60%.

Q: Is the RTX 4070 the bottleneck at 1080p Low settings?

A: The data shows 208.9 FPS at 1080p Low, but the frame rate only drops to 142.5 at 1440p Low (a 32% decrease for 78% more pixels), which suggests the GPU is not fully utilized at 1080p and another component limits performance.

Q: What is the percentile ranking of the RTX 4070 among all GPUs?

A: The RTX 4070 is in the 81st percentile, with an average benchmark score of 37283.

Q: At which resolution and settings does the combo fall below 60 FPS?

A: The combo falls below 60 FPS at 4K Ultra (34.1 FPS) and 4K High (50.8 FPS). At 1440p Ultra, it achieves 55.6 FPS, also below 60.

Q: How much faster is 1440p Medium compared to 1440p High?

A: At 2560x1440, Medium settings produce 126.9 FPS versus 86.4 FPS at High, a difference of 40.5 FPS.

Measured FPS Breakdown

At 1920x1080, the combo delivers 208.9 FPS on Low, 190.4 FPS on Medium, 127.1 FPS on High, and 85.1 FPS on Ultra. These numbers show that the gap between Low and Medium is only 18.5 FPS, while the drop from Medium to High is substantial at 63.3 FPS. Ultra settings cost another 42 FPS compared to High. For competitive or high-refresh-rate play, 1080p Low or Medium provides the highest frame rates, but even Ultra remains above 85 FPS.

At 2560x1440, the average FPS values are 142.5 for Low, 126.9 for Medium, 86.4 for High, and 55.6 for Ultra. The pattern repeats: Low and Medium are close (15.6 FPS apart), while High takes a significant hit of 40.5 FPS. Ultra falls below 60 FPS, which may be noticeable in a game where smooth camera movement matters. The 1440p results suggest that High is the sweet spot for visual quality without sacrificing fluidity, as it remains above 85 FPS.

At 3840x2160, the measured averages are 80 FPS on Low, 70.7 FPS on Medium, 50.8 FPS on High, and 34.1 FPS on Ultra. No preset achieves 60 FPS except Low and Medium, and even Medium is only 10.7 FPS above the 60 FPS threshold. High and Ultra are clearly not viable for smooth gameplay at 4K with this combo. The step from Low to Medium costs 9.3 FPS, but the step from Medium to High costs 19.9 FPS, indicating that High settings include features that are disproportionately expensive at this resolution.

CPU Role

The AMD Ryzen 5 5600X has 6 cores and 12 threads, with a base clock of 3.70 GHz and a boost clock of 4.60 GHz. Its 32 MB of L3 cache and dual-channel DDR4 memory support (51.2 GB/s bandwidth) are typical for a mid-range desktop processor from the Zen 3 generation. The CPU’s benchmark scores show strong single-thread performance, with a 3dmark_single_thread score of 917 and a cinebench_r23_singlecore score of 2622. Multi-threaded results include a cinebench_r23_multicore score of 18578 and a passmark_multithread score of 21858.

In Archeage, the CPU’s role appears most significant at 1080p, where frame rates exceed 200 FPS. The fact that 1080p Low (208.9 FPS) is only 46.5 FPS higher than 1440p Low (142.5 FPS) suggests that the CPU or memory subsystem cannot keep up with the GPU’s output at lower resolutions. The 5600X’s percentile rank is 78 among all CPUs, with an average benchmark score of 20680. Its nearest rival, the AMD Ryzen 5 5600GT, scores 20740 (-0.3%), meaning the 5600X is essentially equivalent in synthetic tests to that chip. The Intel Core i7-10700 also posts 20746 (-0.3%), further confirming that the 5600X sits in a competitive performance tier.

The CPU’s 6 cores and 12 threads are ample for an MMORPG like Archeage, which likely uses fewer than 8 threads for most gameplay. The data shows no scenario where the CPU’s multi-core capability becomes a limiting factor, as even at 4K Ultra the GPU is clearly the bottleneck. However, the high FPS at 1080p Low (208.9) indicates that the CPU’s single-thread performance is adequate to push frame rates well beyond typical display refresh rates.

Settings Recommendations

The measured FPS values provide clear guidance for the optimal experience. At 1920x1080, High settings deliver 127.1 FPS, which is smooth on any display. Ultra at 1080p still achieves 85.1 FPS, so players seeking maximum visual fidelity can use it without dropping below 60. Medium at 1080p offers 190.4 FPS, which is beneficial for 144Hz or 240Hz monitors where every frame counts.

At 2560x1440, High settings produce 86.4 FPS, which is above 60 and suitable for most gaming monitors. Medium reaches 126.9 FPS, making it the best choice for high-refresh-rate 1440p panels. Ultra at 1440p falls to 55.6 FPS, just below the 60 FPS target, so it should be avoided unless the user accepts a slightly less fluid experience.

At 3840x2160, only Low (80 FPS) and Medium (70.7 FPS) are above 60 FPS. High and Ultra are not recommended for 4K gaming with this combo, as they produce 50.8 and 34.1 FPS respectively. For a balanced experience across resolutions, the data suggests Medium or High settings, with the choice depending on whether the user prioritizes frame rate or visual quality. Medium offers a 46% FPS improvement over High at 1440p (126.9 vs 86.4), while High provides noticeably better graphics. For most users, High at 1080p or 1440p is the recommended preset, as it stays above 85 FPS in both cases and avoids the excessive performance cost of Ultra.

How This Combo Ranks

The AMD Ryzen 5 5600X + NVIDIA GeForce RTX 4070 combination ranks 443rd out of 1727 tested combos in Archeage, placing it in the top 26% of all configurations. This ranking is surprisingly modest given the individual components’ percentiles (78th for CPU, 81st for GPU), which suggests that Archeage’s performance characteristics do not fully utilize the RTX 4070’s capabilities. The game’s 2014 release date means it was designed for older hardware, and the data confirms that the GPU is often underutilized at lower resolutions.

The rank of 443 implies that many other combos, likely with faster CPUs or more powerful GPUs, achieve higher FPS in this specific title. However, the measured FPS values show that this combo is more than sufficient for smooth gameplay at 1080p and 1440p, with the only significant weakness appearing at 4K Ultra. The discrepancy between the combo’s rank and its actual playability highlights how synthetic benchmarks and game-specific tests can diverge, especially for older MMOs with unusual rendering workloads.

Given that the RTX 4070’s nearest rivals in the GPU database include the AMD Radeon RX Vega 56 (0.6% lower score) and the NVIDIA GeForce MX570 A (1.9% lower), the 4070 is not dramatically ahead of older cards in raw compute. Yet in Archeage, the 4070’s modern features may contribute to the strong 1080p and 1440p results. The combo’s rank of 443 out of 1727 means that 74% of tested configurations perform better, but those likely include newer CPUs and higher-tier GPUs. For the target user of a 5600X and 4070, the measured data provides a realistic expectation: this is a mid-to-high-end combo that handles Archeage well at most settings, with the caveat that Ultra presets at high resolutions remain challenging.