Archeage

The AMD Ryzen 5 2600 paired with the Intel Arc B370 ranks at position 3423 out of 3708 tested combos in Archeage, placing it in the bottom 8% of all configurations. This is a low-tier result for a game that is heavily dependent on consistent frame delivery. The combo’s percentile ranking for the CPU alone is 75, but the GPU sits at just the 5th percentile, indicating a severe bottleneck that drags the entire experience down. The data suggests that while the processor is a mid-pack performer in synthetic tests, the graphics solution is not equipped to handle the demands of this MMORPG at playable levels.

How This Combo Ranks

The combination of the Ryzen 5 2600 and the Arc B370 lands at a rank of 3423 out of 3708 in Archeage, a position that puts it in the bottom tier of all tested hardware pairings. This ranking is driven almost entirely by the GPU’s performance ceiling, as the CPU’s average benchmark score of 21484 places it in the 75th percentile of all processors. The GPU, by contrast, has an average benchmark score of just 1184, which places it in the 5th percentile of all graphics cards. That disparity is the defining characteristic of this combo: a capable six-core processor held back by a graphics solution that is closer in performance to integrated graphics from over a decade ago.

Comparing the CPU to its nearest rivals shows that the Ryzen 5 2600 is not the limiting factor here. It is within 0.2% of the Intel Core Ultra 5 228V, which scores 21440, and within 0.5% of the Intel Core i9-11900H, which scores 21367. It actually outperforms the AMD EPYC 9454 by 1.2%, though that chip’s score of 21223 is lower. The processor’s 12 threads and 3.90 GHz boost clock are sufficient for an MMORPG like Archeage, which relies on single-thread responsiveness in crowded areas. The bottleneck is unequivocally the GPU, which is why this combo ranks so poorly despite having a respectable CPU.

The GPU’s nearest rivals further illustrate the problem. The Arc B370’s score of 1184 is nearly identical to the ATI Mobility Radeon HD 5570 (1186) and the ATI Radeon HD 5770 (1190), both of which are legacy parts. It is 0.7% ahead of the AMD Radeon HD 7650M and 1.4% behind the AMD FirePro M2000. None of these are modern gaming GPUs, and the data shows that the Arc B370 is effectively competing with hardware that predates Archeage’s 2014 release. This is a fundamental mismatch for a game that, while old, still requires more than a minimal graphics solution to run smoothly.

GPU Role

The Intel Arc B370 is an integrated graphics processor (IGP) based on the Xe3-LPG architecture, built on a 3 nm process. Its memory configuration is system shared, meaning it draws from the same DDR4 pool as the CPU, with bandwidth that is system dependent. This is a critical limitation for Archeage, as the game’s open-world environments and particle effects require consistent memory bandwidth. The GPU’s base clock is 300 MHz, boosting to 2400 MHz, but the memory speed is entirely reliant on the system’s RAM, which in this case is dual-channel DDR4 at 46.9 GB/s per the CPU’s specs. That shared bandwidth creates contention between CPU and GPU workloads, which is visible in the frame rate data.

The GPU has 1280 shading units, 40 texture mapping units, and 20 render output units, with 10 ray tracing cores. Its pixel rate is 48.00 GPixel/s and its texture rate is 96.00 GTexel/s, with a FP32 throughput of 6.144 TFLOPS. While these numbers might seem adequate for a low-end discrete GPU, the fact that this is an IGP with no dedicated memory means it cannot sustain performance in a game like Archeage, which has large draw distances and many on-screen characters. The 25 W TDP and "IGP" slot width confirm that this is not designed for gaming, and the benchmark data reflects that.

In the measured FPS results, the GPU’s role is clear: it cannot maintain playable frame rates at any resolution above 1080p Low. At 4K Ultra, the average FPS drops to 10, which is a slideshow. The data indicates that the GPU is the sole component responsible for these low scores, as the CPU’s own benchmarks show it is capable of much higher throughput. The Arc B370’s 5th percentile ranking among all GPUs is a quantitative statement of its inadequacy for this title, and the measured results in Archeage are consistent with that assessment.

Resolution Scaling

The FPS scaling from 1080p to 4K reveals a GPU that is completely overwhelmed by resolution increases. At 1080p Low, the combo averages 65 FPS, which drops to 43 FPS at 1440p Low, a 34% reduction. Moving to 4K Low, the average falls to 25 FPS, which is a further 42% drop. This steep decline indicates that the limiting component is the GPU, as a CPU-bound scenario would see less dramatic scaling with resolution. The Ryzen 5 2600, with its 12 threads, is not the constraint here; the Arc B370’s shared memory and low fill rate are.

At Medium settings, the trend continues: 57 FPS at 1080p, 39 FPS at 1440p, and 22 FPS at 4K. The drop from 1080p to 1440p is 32%, and from 1440p to 4K is 44%. This non-linear scaling is typical of a GPU that is running out of memory bandwidth or pixel throughput. At High settings, the numbers are 39 FPS at 1080p, 26 FPS at 1440p, and 15 FPS at 4K, showing a 33% drop for each resolution step. The Ultra preset is the worst, with 27 FPS at 1080p, 18 FPS at 1440p, and 10 FPS at 4K, where the frame rate becomes essentially unplayable.

The data shows that the Arc B370’s performance is highly resolution-sensitive, which is a hallmark of a GPU with insufficient memory bandwidth. The system shared memory, which is dependent on the CPU’s dual-channel DDR4 at 46.9 GB/s, becomes a bottleneck as the resolution increases and the demand for texture data grows. The result is that the combo is only viable at 1080p Low, and even then, the 65 FPS average is not stable, as the Medium preset’s min FPS of 49 at 1080p suggests frame pacing issues that could be problematic in fast-paced PvP combat.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. Low settings yield an average of 65 FPS, which is the only preset that approaches a smooth experience. Medium settings drop to 57 FPS, with a minimum of 49 FPS and a maximum of 66 FPS, indicating some variance but still playable. High settings fall to 39 FPS, and Ultra drops to 27 FPS, which is below the threshold for comfortable play. The 1080p data shows that the GPU can handle the game only at the lowest presets, and even then, the frame rate is not locked to a monitor’s refresh rate.

At 2560x1440, the situation worsens. Low settings average 43 FPS, which is a significant drop from 1080p. Medium settings average 39 FPS, with a minimum of 33 FPS and a maximum of 44 FPS, showing that the frame time variance increases. High settings average 26 FPS, and Ultra averages 18 FPS. None of these are playable for an MMORPG where reaction time matters, and the data suggests that 1440p is not a viable resolution for this combo in Archeage.

At 3840x2160, the numbers are abysmal. Low settings average 25 FPS, Medium averages 22 FPS with a minimum of 19 FPS and a maximum of 25 FPS, High averages 15 FPS, and Ultra averages 10 FPS. These are not playable frame rates by any standard. The 4K data points are consistent with a GPU that has exhausted its memory bandwidth and pixel throughput, and the results make it clear that this resolution is only for screenshot purposes, not actual gameplay.

Settings Recommendations

Given the measured FPS data, the only viable settings for this combo in Archeage are at 1920x1080 with the Low preset, which provides an average of 65 FPS. This is the sole configuration that approaches a fluid experience, though users should be aware that the Medium preset’s minimum of 49 FPS at the same resolution indicates that even a slight increase in visual quality comes with a risk of frame dips. The Medium preset at 1080p averages 57 FPS, which is acceptable, but the data shows it is not as stable as Low.

For users who prioritize visual fidelity over frame rate, the High preset at 1080p is the highest setting that stays above 30 FPS, with an average of 39 FPS. However, this is a compromise, as the game’s combat and exploration will feel less responsive. The Ultra preset at any resolution is not recommended, as the highest average FPS it achieves is 27 at 1080p, which is below the threshold for smooth gameplay. At 1440p and 4K, no preset is playable, with the best case being 43 FPS at 1440p Low, which is still below the 60 FPS target for competitive play.

The data suggests that this combo is best suited for 1080p gaming at the lowest settings, and even then, users should expect frame rate fluctuations in heavily populated areas. The CPU’s 12 threads are sufficient, but the GPU’s shared memory architecture and low fill rate mean that any increase in resolution or settings will result in a disproportionate drop in performance. For a game like Archeage, where large-scale battles can occur, the Medium preset’s minimum FPS of 49 at 1080p may still lead to stutters, so Low is the safest choice.

FAQ

Q: What is the highest average FPS this combo can achieve in Archeage?

A: The highest average FPS is 65, which is achieved at 1920x1080 resolution with the Low settings preset.

Q: Is this combo capable of running Archeage at 4K resolution?

A: No. At 3840x2160, the best average FPS is 25 on Low settings, which drops to 10 FPS on Ultra. None of the 4K presets produce playable frame rates.

Q: How does the Ryzen 5 2600 compare to its nearest rival in terms of CPU score?

A: The Ryzen 5 2600 has an average benchmark score of 21484, which is 0.2% higher than the Intel Core Ultra 5 228V’s score of 21440 and 0.5% higher than the Intel Core i9-11900H’s score of 21367.

Q: What is the GPU’s performance percentile relative to all other graphics cards?

A: The Intel Arc B370 is in the 5th percentile of all GPUs, with an average benchmark score of 1184, placing it near the performance level of legacy parts like the ATI Radeon HD 5770.

Q: At 1440p, which settings preset provides the highest minimum FPS?

A: At 2560x1440, the Medium preset has a minimum FPS of 33, which is the highest minimum among all presets at that resolution. Low settings have a higher average of 43 FPS but no reported minimum.

Q: Is the CPU or GPU the limiting factor for this combo in Archeage?

A: The GPU is the limiting factor. The CPU ranks in the 75th percentile, while the GPU ranks in the 5th percentile. The steep FPS drops with resolution increases confirm that the Arc B370 cannot keep up with the CPU’s capabilities.