Intel Xeon Platinum 8280 vs Intel Xeon W-3175X Comparison
Intel Xeon Platinum 8280
Xeon W-3175X
PERFORMANCE BENCHMARKS
Analysis: Intel Xeon Platinum 8280 vs Intel Xeon W-3175X
The Intel Xeon W-3175X and Intel Xeon Platinum 8280 are both 28-core, 56-thread server and workstation processors built on Intel’s 14 nm process, yet benchmark results show a clear and consistent performance hierarchy. In every head-to-head benchmark recorded, the W-3175X finishes ahead, with a uniform 9.4% advantage in multi-core and single-core Cinebench tests alike. The average benchmark score confirms this: the W-3175X posts a 10369 average against the Platinum 8280’s 10230, a 1.4% gap that places the W-3175X as the stronger overall performer. Both chips sit at the 66th percentile among all CPUs, but the data shows that for anyone choosing strictly between these two, the W-3175X is the faster part across every measured workload.
Where Each One Wins
The Intel Xeon W-3175X wins everywhere the data measures. It takes all six head-to-head benchmarks, with its largest margins appearing in Cinebench R15 multi-core, where it scores 3900 against the Platinum 8280’s 3564, a 9.4% lead. The single-core results tell the same story: the W-3175X reaches 550 in Cinebench R15 single-core versus 503 for the Platinum 8280, a 9.3% edge. Moving to newer workloads, the W-3175X scores 16250 in Cinebench R20 multi-core, while the Platinum 8280 manages 14854, again a 9.4% difference. The R23 results extend the pattern, with the W-3175X at 38692 multi-core and 5462 single-core, compared to 35367 and 4993 for the Platinum 8280.
The Platinum 8280’s only measurable advantage is not in raw performance but in efficiency and platform flexibility. Its 205 W TDP is 50 W lower than the W-3175X’s 255 W, meaning it delivers 28 cores with less thermal overhead. The Platinum 8280 also belongs to the Cascade Lake-SP generation, a newer architecture than the W-3175X’s Skylake-W. For workloads where the data shows a 1.1% to 0.6% deficit against rivals like the Intel Xeon Gold 6338N, the Platinum 8280 still sits within a narrow band of its nearest competitors, but it never beats the W-3175X on any benchmark.
In practical terms, the W-3175X is the choice for compute-bound tasks where every point in Cinebench matters. The Platinum 8280 is the choice for power-constrained server environments, where its lower TDP and Cascade Lake features compensate for the performance gap.
Architecture Differences
Both processors use Intel’s 14 nm process and pack 8,000 million transistors, but their architectures diverge in generation and implementation. The W-3175X is built on Skylake-W, a workstation-focused design, while the Platinum 8280 uses Cascade Lake-SP, a server platform. The W-3175X has a die size of 688 mm², while the Platinum 8280’s die size is not recorded. Both share identical cache hierarchies: 64 KB of L1 per core, 1 MB of L2 per core, and 38.5 MB of shared L3 cache.
Clock speeds separate the two clearly. The W-3175X runs a 3.10 GHz base clock and boosts to 4.30 GHz, while the Platinum 8280 sits lower at 2.70 GHz base and 4.00 GHz boost. That 0.40 GHz base gap and 0.30 GHz boost gap directly explain the W-3175X’s consistent benchmark lead. The W-3175X also has an unlocked multiplier, allowing overclocking, while the Platinum 8280’s multiplier is locked. This is a meaningful architectural difference: the W-3175X can be pushed beyond its stock boost, while the Platinum 8280 is fixed at factory settings.
Memory support differs as well. The W-3175X specifies a six-channel DDR4 memory bus with 128.0 GB/s bandwidth. The Platinum 8280 supports DDR4 but its memory bus and bandwidth are not listed. Both support ECC memory. The W-3175X provides 48 PCIe Gen 3 lanes from the CPU, while the Platinum 8280’s PCIe configuration is not recorded. The W-3175X is end-of-life, while the Platinum 8280’s production status is not specified.
The architectures also target different market segments. Both are marked as Server/Workstation, but the W-3175X’s Skylake-W generation and unlocked multiplier point toward high-end workstation use, while the Platinum 8280’s Cascade Lake-SP generation is a pure server part. Neither has integrated graphics.
The Verdict
The data is unambiguous: the Intel Xeon W-3175X is the faster processor. It wins all six head-to-head benchmarks with a uniform 9.4% margin in every Cinebench test, from R15 multi-core to R23 single-core. Its higher base and boost clocks, combined with an unlocked multiplier, make it the superior choice for raw compute performance. The average benchmark score of 10369 versus 10230 confirms this, and the 1.4% delta places the W-3175X ahead of the Platinum 8280 in the nearest rival rankings.
The Platinum 8280 is not without merit. Its 205 W TDP is significantly lower than the W-3175X’s 255 W, making it a better fit for dense server deployments where power and cooling are limited. Its Cascade Lake architecture is newer, and its locked multiplier is typical for server parts that prioritize stability over tuning. For workloads that are not compute-bound, the Platinum 8280’s efficiency could be a deciding factor.
That said, the benchmark results leave no room for doubt regarding performance. The W-3175X is the pick for anyone who needs maximum multi-threaded throughput, as measured by Cinebench. The Platinum 8280 is the pick for server administrators who prioritize power efficiency and are willing to accept a 9.4% performance hit. For a workstation where performance is the primary goal, the W-3175X wins outright.
FAQ
Q: Which processor has a higher clock speed?
A: The Intel Xeon W-3175X has a 3.10 GHz base clock and 4.30 GHz boost clock, versus the Platinum 8280’s 2.70 GHz base and 4.00 GHz boost.
Q: How much faster is the W-3175X in multi-core performance?
A: In Cinebench R23 multi-core, the W-3175X scores 38692 against the Platinum 8280’s 35367, a 9.4% advantage. The same 9.4% delta appears in R15 and R20 multi-core tests.
Q: Do both processors have the same core and thread counts?
A: Yes, both have 28 cores and 56 threads, and both share 38.5 MB of L3 cache.
Q: Is the W-3175X overclockable?
A: Yes, the W-3175X has an unlocked multiplier. The Platinum 8280’s multiplier is locked.
Q: Which processor has a lower TDP?
A: The Platinum 8280 has a 205 W TDP, while the W-3175X is rated at 255 W.
Q: Are there any benchmarks where the Platinum 8280 wins?
A: No. The head-to-head data shows the W-3175X wins all six benchmarks, with the Platinum 8280 recording zero wins.
Head-to-Head Benchmarks
The W-3175X dominates every recorded benchmark, and the margins are remarkably consistent. In Cinebench R15 multi-core, the W-3175X scores 3900 versus 3564 for the Platinum 8280, a 9.4% lead. Single-core R15 follows with 550 against 503, a 9.3% edge. The R20 tests show the same pattern: 16250 versus 14854 in multi-core and 2294 versus 2097 in single-core, both 9.4% deltas. R23 multi-core sees 38692 against 35367, and single-core R23 sees 5462 against 4993, again both 9.4%.
These numbers reveal a processor that is uniformly faster across all Cinebench versions, from the older R15 to the current R23. The consistency of the 9.4% delta suggests the advantage comes from clock speed rather than workload-specific optimizations. The W-3175X’s 4.30 GHz boost clock is 0.30 GHz higher than the Platinum 8280’s 4.00 GHz, and that advantage scales directly into benchmark scores.
The Geekbench scores further support this, though they are not part of the head-to-head set. The W-3175X posts 14331 multi-core and 1472 single-core, while the Platinum 8280 has no Geekbench results listed. The average benchmark score of 10369 for the W-3175X versus 10230 for the Platinum 8280 places the W-3175X 1.4% ahead, a smaller gap than the Cinebench tests because it includes the Geekbench numbers.
For anyone looking at the largest single benchmark win, the W-3175X’s 38692 in Cinebench R23 multi-core is the standout figure, beating the Platinum 8280 by 3325 points. The smallest margin is in R15 single-core, where the 47-point difference still represents a 9.3% win. There is no benchmark where the Platinum 8280 closes the gap.
Specification Differences
The two processors differ in several key specifications, starting with architecture. The W-3175X uses Skylake-W, while the Platinum 8280 uses Cascade Lake-SP. The W-3175X is part of the Xeon W generation, and the Platinum 8280 is part of the Xeon Platinum generation. Clock speeds differ: the W-3175X runs at 3.10 GHz base and 4.30 GHz boost, while the Platinum 8280 runs at 2.70 GHz base and 4.00 GHz boost. TDP also differs, with the W-3175X at 255 W and the Platinum 8280 at 205 W.
The W-3175X has an unlocked multiplier, while the Platinum 8280’s is locked. The W-3175X’s die size is 688 mm², while the Platinum 8280’s is not listed. Memory bandwidth is specified for the W-3175X at 128.0 GB/s with a six-channel bus, while the Platinum 8280’s memory bus and bandwidth are not recorded. The W-3175X provides 48 PCIe Gen 3 lanes from the CPU, while the Platinum 8280’s PCIe configuration is not listed.
Release dates separate them: the W-3175X launched on 2019-01-29, and the Platinum 8280 launched on 2018-12-10. The W-3175X has a launch MSRP of $2999, while the Platinum 8280 has no recorded MSRP. The W-3175X’s production status is end-of-life, while the Platinum 8280’s status is not specified. Both support DDR4 memory and ECC, and both lack integrated graphics. The W-3175X’s part number is SRF6LQRDK, and the Platinum 8280’s is SRF9PCD8069504228001. All other specifications, including core count, thread count, cache sizes, process node, foundry, and transistor count, are identical.