AMD Ryzen 7 2700E vs AMD Ryzen 7 PRO 1700 Comparison
AMD Ryzen 7 2700E
Ryzen 7 PRO 1700
PERFORMANCE BENCHMARKS
Analysis: AMD Ryzen 7 2700E vs AMD Ryzen 7 PRO 1700
The AMD Ryzen 7 PRO 1700 and the AMD Ryzen 7 2700E are two 8-core, 16-thread desktop processors sharing the same AM4 socket, yet they represent different generations of AMD's Zen architecture. The data shows a remarkably close contest across all tested workloads, with the older PRO 1700 consistently edging out the newer 2700E by a narrow but uniform margin. This analysis examines the benchmark results, architectural differences, and practical implications to determine which processor holds the advantage in specific scenarios.
Head-to-Head Benchmarks
The benchmark data presents an unusually consistent picture: the AMD Ryzen 7 PRO 1700 wins all six head-to-head comparisons, though by margins so slim they fall within typical run-to-run variance. In Cinebench R15 multi-core, the PRO 1700 scores 1259 against the 2700E's 1255, a delta of 0.3%. The single-core result in the same test is a perfect tie at 177 points for both processors, with a delta of 0%.
Moving to Cinebench R20, the pattern repeats. The PRO 1700 posts a multi-core score of 5246 versus 5232 for the 2700E, again a 0.3% advantage. In single-core, the PRO 1700 leads 740 to 738, also a 0.3% delta. The most recent Cinebench R23 test shows the largest absolute gap but the same relative difference: the PRO 1700 scores 12491 multi-core and 1763 single-core, while the 2700E manages 12458 and 1758 respectively, with each comparison showing a 0.3% lead for the PRO 1700.
The average benchmark score reinforces this narrative. The PRO 1700 holds an average of 3613 across all recorded tests, while the 2700E sits at 3603. Notably, the PRO 1700's nearest rival list includes the 2700E with a delta of 0.3%, while the 2700E's list shows the PRO 1700 ahead by -0.3%. Both processors occupy the 55th percentile among all CPUs, placing them in the middle of the performance distribution. The consistency of the 0.3% margin across every multi-core and single-core test suggests a systematic, if minimal, advantage for the PRO 1700 rather than random variation.
Architecture Differences
Despite the similar performance, the two processors come from different design generations. The Ryzen 7 PRO 1700 belongs to the 1000 series and uses the original Zen architecture, codenamed Summit Ridge, built on a 14 nm process at GlobalFoundries. The Ryzen 7 2700E is part of the 2000 series, employing the Zen+ architecture codenamed Pinnacle Ridge, fabricated on a 12 nm node, also at GlobalFoundries. This process shrink explains the die size reduction: the PRO 1700 measures 213 mm² while the 2700E shrinks to 192 mm², despite both packing the same 4,800 million transistors.
Clock speeds differ in an interesting pattern. The PRO 1700 has a higher base clock of 3.00 GHz compared to the 2700E's 2.80 GHz, a 200 MHz advantage at the floor. However, the 2700E flips the script on boost clocks, reaching 4.00 GHz versus the PRO 1700's 3.70 GHz, a 300 MHz advantage at the ceiling. Both processors carry a 65 W TDP, so the power envelope is identical, but the Zen+ architecture's higher boost capability does not translate into benchmark victories.
Cache configurations are identical: both feature 96 KB of L1 per core, 512 KB of L2 per core, and 16 MB of shared L3 cache. Memory support also matches in most respects—both use DDR4 with dual-channel memory buses. The PRO 1700 lists a memory bandwidth of 42.7 GB/s, while the 2700E's bandwidth figure is not provided. A more significant divergence appears in ECC memory support: the PRO 1700 supports ECC, while the 2700E does not. The PRO 1700 also lists PCIe Gen 3 with 16 lanes from the CPU, while the 2700E's PCIe configuration is not specified.
Other differences involve user-facing features. The PRO 1700 has an unlocked multiplier, enabling overclocking, while the 2700E's multiplier is locked. The PRO 1700 also carries a part number (YD170BBBM88AE), while the 2700E has none listed. Both processors lack integrated graphics and target the desktop market segment, with both marked as active in production.
Where Each One Wins
Given the uniform 0.3% advantage for the PRO 1700 across all Cinebench tests, the use-case split is narrow but definable. The PRO 1700 wins in every measured scenario, from single-threaded tasks like Cinebench R15 single-core (177 vs 177, technically a tie) to heavily multi-threaded workloads like Cinebench R23 multi-core (12491 vs 12458). For users prioritizing raw compute throughput in rendering or simulation workloads that scale across 16 threads, the PRO 1700's consistent edge, however small, makes it the technically superior choice.
The 2700E's strengths lie outside the benchmark data. Its higher boost clock of 4.00 GHz suggests potential advantages in bursty, short-duration workloads that can leverage peak frequency, though the Cinebench single-core results do not reflect this—the 2700E actually trails in R20 and R23 single-core tests. The 2700E's smaller die size (192 mm² vs 213 mm²) and newer 12 nm process node may offer efficiency characteristics that the benchmark suite does not capture, but no power consumption or thermal data is available to confirm this.
The PRO 1700 also wins on feature completeness: ECC memory support, PCIe Gen 3 with 16 lanes, and an unlocked multiplier. These features make it more suitable for workstation or server-adjacent builds where data integrity and hardware flexibility matter. The 2700E, with its locked multiplier and no ECC support, is more constrained for such use cases, though its lower base clock could theoretically reduce idle power draw, a claim not substantiated by available data.
FAQ
Q: Which processor has the higher average benchmark score?
A: The AMD Ryzen 7 PRO 1700 has an average benchmark score of 3613, while the AMD Ryzen 7 2700E scores 3603, giving the PRO 1700 a 10-point advantage.
Q: Are the two processors identical in cache configuration?
A: Yes, both feature 96 KB of L1 cache per core, 512 KB of L2 cache per core, and 16 MB of shared L3 cache.
Q: What is the difference in process node between the two chips?
A: The PRO 1700 uses a 14 nm process node, while the 2700E uses a 12 nm process node, both fabricated at GlobalFoundries.
Q: Does the Ryzen 7 2700E support ECC memory?
A: No, the 2700E does not list ECC memory support, whereas the PRO 1700 does support ECC memory.
Q: Which processor has a higher boost clock?
A: The Ryzen 7 2700E has a boost clock of 4.00 GHz, which is higher than the PRO 1700's 3.70 GHz boost clock.
Q: How many benchmark wins does each processor have in the head-to-head tests?
A: The PRO 1700 wins all six head-to-head comparisons, while the 2700E wins none.
Specification Differences
The following specifications differ between the two processors, based solely on the provided data:
- Series: PRO 1700 is from the 1000 series; 2700E is from the 2000 series.
- Base Clock: PRO 1700 runs at 3.00 GHz; 2700E runs at 2.80 GHz.
- Boost Clock: PRO 1700 boosts to 3.70 GHz; 2700E boosts to 4.00 GHz.
- Process Node: PRO 1700 uses 14 nm; 2700E uses 12 nm.
- Die Size: PRO 1700 measures 213 mm²; 2700E measures 192 mm².
- Memory Bandwidth: PRO 1700 lists 42.7 GB/s; 2700E has no listed value.
- ECC Memory: PRO 1700 supports ECC; 2700E does not.
- PCIe: PRO 1700 lists Gen 3, 16 Lanes (CPU only); 2700E has no listed PCIe configuration.
- Multiplier Unlocked: PRO 1700 is unlocked; 2700E is locked.
- Part Number: PRO 1700 has YD170BBBM88AE; 2700E has no listed part number.
- Release Date: PRO 1700 released on 2017-06-28; 2700E released on 2018-09-18.
The Verdict
The benchmark data is unambiguous: the AMD Ryzen 7 PRO 1700 outperforms the AMD Ryzen 7 2700E in every recorded test, albeit by a consistent 0.3% margin. For users who prioritize maximum compute performance in Cinebench workloads, the PRO 1700 is the correct choice. Its advantages extend beyond raw speed to include ECC memory support, a listed PCIe Gen 3 configuration, and an unlocked multiplier, making it more versatile for professional or enthusiast builds where data integrity and hardware tuning are priorities.
The 2700E, despite being a newer generation with a smaller 12 nm process node and a higher 4.00 GHz boost clock, cannot translate those architectural improvements into benchmark victories. Its only potential advantages—the smaller die size and the higher boost frequency—do not manifest in the available test results. For users who require a locked multiplier or who specifically need the 2000 series generation for compatibility reasons, the 2700E remains a viable option, but the data shows no performance scenario where it wins.
In practical terms, the difference between these two processors is negligible for most workloads. A 0.3% delta in multi-core scores means the PRO 1700 completes a Cinebench R23 render in roughly the same time as the 2700E. However, the PRO 1700's feature set—particularly ECC support and the unlocked multiplier—gives it a functional edge that the benchmarks alone do not fully capture. The verdict from the data is clear: choose the PRO 1700 for its marginal performance lead and superior feature set, unless the 2700E's specific characteristics, such as its higher boost clock, are required for a particular application.