To The Core
This combination delivers exceptional performance with an average of 317 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 132 | 163 | 188 | 224 |
| 1440p QHD | 231 | 289 | 336 | 392 |
| 1080p Full HD | 345 | 431 | 492 | 585 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
To The Core with Intel Core Ultra 7 265K + NVIDIA GeForce RTX 5080, In-Depth Analysis
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The measured frame rates for this combo tell a clear story about how To The Core scales with resolution. Moving from 1920x1080 to 2560x1440 at Ultra settings, the average FPS drops from 344.8 to 230.8, a reduction of exactly 114 frames per second. That is a 33% loss in performance when pixel count increases by roughly 78%, which indicates the workload is becoming more demanding on the render pipeline rather than being purely CPU-bound.
The jump from 1440p to 4K (3840x2160) at Ultra is even more telling. The average FPS falls from 230.8 to 131.5, a decline of 99.3 frames per second. That is a 43% drop for another 78% increase in pixels. The scaling pattern here is not linear, and the fact that the 4K Ultra result is less than half of the 1080p Low result (131.5 vs. 585) suggests that the GPU is increasingly the limiting factor as resolution climbs.
At Low settings, the resolution scaling is stark. The 1080p Low average of 585 FPS drops to 392.4 at 1440p and then to 223.6 at 4K. The 4K Low result is still very playable, but the delta between 1080p and 4K at Low is 361.4 FPS, which is a 61.8% reduction. This large gap at the lowest settings implies that even when the graphics load is minimal, the render output is still heavily influenced by resolution.
The data suggests a dual-phase behavior. At 1080p, the frame rates are extraordinarily high across all settings, with even Ultra hitting 344.8 FPS. This indicates that the CPU is capable of feeding the GPU at these lower resolutions, but the GPU is not fully saturated. At 4K, however, the gap between Low and Ultra narrows in relative terms (223.6 vs. 131.5), which points to the GPU becoming the primary bottleneck. The benchmark results indicate that this system is well-balanced for high-refresh 1440p gaming, but 4K Ultra pushes the GPU to its limits.
GPU Role — VRAM, clocks, and how they relate to this game's results
The NVIDIA GeForce RTX 5080 brings 16 GB of GDDR7 memory on a 256-bit bus, delivering 960.0 GB/s of bandwidth. For To The Core, an idle-genre title that does not typically demand massive texture pools, this memory configuration is more than sufficient. The measured FPS at 4K Ultra (131.5) suggests that the game is not VRAM-limited at this capacity, as the frame rate remains high despite the resolution and quality preset.
The GPU's clock behavior plays a role in the observed scaling. The base clock is 2295 MHz with a boost clock of 2617 MHz. The boost behavior directly influences how the GPU handles varying loads. At lower resolutions, where the GPU is less stressed, the boost clock can sustain higher frequencies, contributing to the 585 FPS result at 1080p Low. At 4K Ultra, the sustained load likely causes the clock to settle near the base or fluctuate, which partially explains the 131.5 FPS result.
The RTX 5080's architecture, Blackwell 2.0 on a 5 nm process, includes 10752 shading units and 112 ROPs. The pixel rate of 293.1 GPixel/s is a relevant metric for a game like To The Core, which may have simple geometry but still requires fill rate for resolution scaling. The texture rate of 879.3 GTexel/s ensures that even at 4K, texture sampling is not a bottleneck. The data shows that the GPU delivers consistently high frame rates, but the drop from 4K Medium (188.4) to 4K Ultra (131.5) indicates that the Ultra preset introduces effects that heavily tax the render pipeline.
Comparing to the GPU's nearest rivals in synthetic benchmarks, the RTX 5080 sits 1.6% above the Intel Arc A570M and 2.5% above the Intel Arc A580. These are not direct gaming comparisons, but they contextualize the GPU's position. The measured game results show that the RTX 5080 is far ahead of these rivals in real-world FPS, but the synthetic deltaPct values suggest a close grouping in raw compute.
How This Combo Ranks — use comboRankInGame vs other tested combos
The combination of the Intel Core Ultra 7 265K and the NVIDIA GeForce RTX 5080 ranks 80th out of 1756 tested combos in To The Core. This places it in the top 4.6% of all configurations tested, which is a strong showing. However, the rank is not #1, which raises the question of what other combos are achieving higher frame rates. Given the extraordinarily high FPS numbers measured here (up to 585 at 1080p Low), the combos ranked above this one must be achieving even higher results, likely through higher CPU clocks or more optimized GPU pairings.
The rank of 80 out of 1756 means that roughly 1676 tested combinations delivered lower average frame rates in this game. This is a significant achievement for a CPU that is not the top-tier flagship and a GPU that is second in its generation. The data suggests that the balance between the Core Ultra 7 265K and the RTX 5080 is well-matched for To The Core, but there is headroom for improvement if paired with a stronger CPU.
The CPU's nearest rivals in synthetic benchmarks provide context. The Core Ultra 7 265K scores 79102 on average, which is 0.2% below the Intel Core Ultra 7 265KF and 0.9% below the Intel Core i9-14900K. In a game like To The Core, where frame rates are extremely high, even a 0.9% CPU difference can translate to several FPS. The combo rank reflects this sensitivity, as the top 80 combos likely include CPUs with higher single-thread scores.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
At 1920x1080, the measured average frame rates are as follows: Low delivers 585 FPS, Medium delivers 492.4 FPS, High delivers 431.3 FPS, and Ultra delivers 344.8 FPS. The spread from Low to Ultra is 240.2 FPS, which is a 41% reduction from the Low baseline. This is the widest absolute spread across all resolutions, indicating that at 1080p, the settings have a profound impact on the render load.
At 2560x1440, the frame rates are 392.4 FPS for Low, 335.7 FPS for Medium, 289.1 FPS for High, and 230.8 FPS for Ultra. The spread from Low to Ultra is 161.6 FPS, which is a 41.2% reduction. Interestingly, the percentage drop from Low to Ultra is nearly identical to 1080p (41% vs. 41.2%), suggesting that the settings scaling is consistent regardless of resolution.
At 3840x2160, the frame rates are 223.6 FPS for Low, 188.4 FPS for Medium, 163.4 FPS for High, and 131.5 FPS for Ultra. The spread from Low to Ultra is 92.1 FPS, which is a 41.2% reduction. This consistency across resolutions is notable — the relative penalty for moving from Low to Ultra is almost exactly 41% at every resolution. This implies that the settings presets have a multiplicative effect on frame rate, independent of resolution.
Comparing resolution scaling at a fixed setting, the data shows that moving from 1080p to 1440p at High reduces FPS from 431.3 to 289.1, a 32.9% drop. Moving from 1440p to 4K at High reduces FPS from 289.1 to 163.4, a 43.5% drop. The larger drop at higher resolutions confirms that the GPU becomes more dominant as the pixel count increases.
FAQ — 4-6 Q&A pairs answerable from FACT PACK data
*Q: What is the highest measured average FPS for this combo in To The Core?*
A: The highest measured average FPS is 585, achieved at 1920x1080 resolution with Low settings.
Q: How does the 4K Ultra performance compare to the 1080p Low performance?
A: The 4K Ultra average FPS is 131.5, which is 77.5% lower than the 1080p Low result of 585 FPS. This represents a drop of 453.5 FPS.
Q: What is the combo's rank among all tested configurations?
A: The combo ranks 80th out of 1756 tested combos in To The Core, placing it in the top 4.6% of all configurations.
Q: Which resolution and settings combination delivers the most balanced high-refresh experience?
A: At 2560x1440 with High settings, the combo delivers 289.1 FPS, which is well above the 144Hz threshold and only 16.2% lower than the 1440p Low result of 392.4 FPS.
Q: Does the GPU's memory bandwidth appear to be a limiting factor?
A: The GPU has 960.0 GB/s of bandwidth and 16 GB of GDDR7 memory. The measured FPS at 4K Ultra (131.5) does not indicate a memory bottleneck, as the frame rate remains high relative to other settings.
Q: How does the CPU's synthetic benchmark score relate to its gaming performance?
A: The CPU has an average benchmark score of 79102, which is 0.2% below the Intel Core Ultra 7 265KF and 0.9% below the Intel Core i9-14900K. This small gap in synthetic scores does not prevent the combo from ranking 80th overall in game performance.
CPU Role — cores, clocks, and how they relate to this game's results
The Intel Core Ultra 7 265K features 20 cores and 20 threads, with a base clock of 3.90 GHz and a boost clock of 5.50 GHz. For To The Core, an idle-genre game, the thread count is likely underutilized. The data shows that at 1080p Low, the combo achieves 585 FPS, which suggests that the CPU is capable of feeding the GPU at extremely high frame rates. The boost clock of 5.50 GHz is critical here, as higher single-thread performance directly translates to higher FPS in games that are not heavily multi-threaded.
The CPU's cache hierarchy includes 192 KB of L1 per core, 3 MB of L2 per core, and 30 MB of shared L3. This cache structure helps reduce memory latency, which is beneficial for frame pacing at high FPS. The memory bandwidth of 102.4 GB/s for DDR5 dual-channel may seem modest compared to the GPU's bandwidth, but for a game like To The Core, the CPU's memory subsystem is rarely the bottleneck, as evidenced by the 585 FPS result.
The CPU's synthetic benchmarks provide insight into its gaming potential. The Cinebench R23 multi-core score is 50009, and the single-core score is 7060. The single-core score is particularly relevant for To The Core, as idle games often rely on a main simulation thread. The PassMark single-thread score of 4904 is also strong, reinforcing that the CPU has ample headroom for high-FPS scenarios.
The CPU's nearest rivals in synthetic benchmarks are all within 1.2% of its average score. The Intel Core Ultra 7 265KF is 0.2% faster, the Intel Core i9-14900KF is 0.2% faster, and the Intel Core i9-14900K is 0.9% faster. In a game where the combo ranks 80th, these small CPU differences could be the deciding factor between rank 80 and a higher rank. The Core Ultra 7 265K's 20 cores and 20 threads are more than sufficient for this title, but the single-thread performance, as measured by the 7060 R23 score, is what drives the high FPS.
Settings Recommendations — which preset gives the best experience per the measured rows
Based on the measured FPS data, the recommended settings depend on the target display refresh rate. For a 60Hz display, all settings and resolutions are overkill, with even the 4K Ultra result of 131.5 FPS being more than double the refresh rate. For a 144Hz display, the 4K High setting (163.4 FPS) is sufficient, while 4K Ultra (131.5 FPS) falls just short. For a 240Hz display, the 1440p High setting (289.1 FPS) is the best choice, as it provides a comfortable margin above the refresh rate.
The data shows a consistent 41% FPS penalty when moving from Low to Ultra, regardless of resolution. This suggests that the Ultra preset is not efficiently scaled — it delivers a significant visual uplift but at a high performance cost. For competitive play, the 1080p Low setting (585 FPS) is unmatched, but for a visually rich idle game, the 1440p High setting (289.1 FPS) offers the best balance. The 1440p Ultra setting (230.8 FPS) is also viable for high-refresh displays, but the 58.3 FPS difference between High and Ultra at this resolution is substantial.
The most efficient setting per the measured rows is 1440p High. It delivers 289.1 FPS, which is 77% of the 1080p Low result (585 FPS) but at a much higher resolution. The 4K Medium setting (188.4 FPS) is also worth considering for 4K displays with 144Hz refresh rates, as it provides a smooth experience without the 56.9 FPS penalty of moving to Ultra. For users with 360Hz displays, the 1080p Medium setting (492.4 FPS) is the highest setting that exceeds the refresh rate, while 1080p High (431.3 FPS) also qualifies.
Hardware Specifications
Intel Core Ultra 7 265K
NVIDIA GeForce RTX 5080
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra 7 265K + NVIDIA GeForce RTX 5080 in To The Core
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 223.6 |
| 3840x2160 | Medium | 188.4 |
| 3840x2160 | High | 163.4 |
| 3840x2160 | Ultra | 131.5 |
| 2560x1440 | Low | 392.4 |
| 2560x1440 | Medium | 335.7 |
| 2560x1440 | High | 289.1 |
| 2560x1440 | Ultra | 230.8 |
| 1920x1080 | Low | 585.0 |
| 1920x1080 | Medium | 492.4 |
| 1920x1080 | High | 431.3 |
| 1920x1080 | Ultra | 344.8 |
To The Core with iUltra 7 265K + Other GPUs
See how To The Core performs with the same CPU but different graphics cards.
To The Core with RTX 5080 + Other CPUs
See how To The Core performs with the same GPU but different processors.
Other Games with iUltra 7 265K + RTX 5080
Explore FPS benchmarks for other games using this same hardware combination.