To The Core

The AMD Ryzen 7 5800XT paired with the NVIDIA GeForce RTX 3070 delivers a compelling performance profile in To The Core, an Idle genre title. Benchmark results for this combination place it at rank 806 out of 1756 tested combos, situating it in the upper-middle tier of the database. The measured data reveals a system capable of high frame rates across all tested resolutions, with the relationship between CPU and GPU workload shifting predictably as resolution increases.

Resolution Scaling

The FPS scaling from 1080p to 4K demonstrates a clear transition in system bottleneck. At 1920x1080 with Low settings, the combo produces 357.4 FPS. Moving to 2560x1440 at the same settings yields 239.6 FPS, a drop of 117.8 FPS. Scaling further to 3840x2160 Low results in 134.5 FPS, which is 222.9 FPS below the 1080p figure. This pattern indicates that at lower resolutions and settings, the frame rate is heavily influenced by the CPU's ability to feed the GPU, as the RTX 3070 is not fully taxed at 1080p Low.

The scaling behavior shifts when examining higher settings. At Ultra settings, the progression is 209.4 FPS at 1080p, 141.8 FPS at 1440p, and 81.3 FPS at 4K. The percentage drop from 1080p to 4K at Ultra is approximately 61%, while at Low settings the drop is about 62%. These similar relative reductions across settings suggest that the GPU becomes the primary limiting component at 4K regardless of quality level. However, the absolute differences are telling: the gap between Low and Ultra at 4K is 53.2 FPS, whereas at 1080p that same gap is 148.0 FPS. This compression of the settings-based spread at higher resolutions confirms that pixel throughput, rather than CPU processing, dominates the 4K results.

The data points to a system where the CPU role is most pronounced at 1080p, particularly with lighter settings. At 4K, the RTX 3070's rendering workload takes precedence, and the Ryzen 7 5800XT provides sufficient headroom to avoid becoming a limiting factor. The measured FPS at 4K Ultra of 81.3 FPS still exceeds 60 FPS, indicating playable performance even at the most demanding tested configuration.

CPU Role

The AMD Ryzen 7 5800XT is an 8-core, 16-thread processor based on the Zen 3 architecture, codenamed Vermeer, built on a 7 nm process at TSMC. It operates with a base clock of 3.80 GHz and a boost clock of 4.80 GHz, with a 105 W TDP. The processor supports DDR4 memory in a dual-channel configuration, providing 51.2 GB/s of memory bandwidth. Its cache hierarchy includes 64 KB of L1 per core, 512 KB of L2 per core, and a 32 MB L3 cache.

In To The Core, the CPU's contribution is most evident at 1080p. The 357.4 FPS result at Low settings indicates that the processor can sustain very high frame rates when the GPU is not the bottleneck. The 3DMark benchmarks for this CPU show a single-thread score of 959 and a 2-thread score of 1879, which expands to 3603 for 4 threads, 6141 for 8 threads, and 7683 for 16 threads. The near-linear scaling from 4 to 8 threads (from 3603 to 6141) and the modest gain from 8 to 16 threads (6141 to 7683) suggest that the game benefits from multiple cores but does not fully utilize all 16 threads. The max-thread score of 7680 is nearly identical to the 16-thread score, reinforcing that additional threads beyond 16 provide no benefit.

The Cinebench R23 results further characterize the CPU: a multicore score of 23794 and a single-core score of 3359. The ratio between these scores indicates strong multi-threaded performance relative to single-thread, which is typical for an 8-core design. In the context of this game, the high single-core performance is likely more relevant, as idle games often rely on a primary simulation thread. The 4.80 GHz boost clock provides the necessary per-core speed to drive high frame rates at lower resolutions, where the GPU is not saturated.

The CPU's percentile ranking among all processors is 86, and its average benchmark score is 29774. Its nearest rivals include the AMD Ryzen 7 PRO 5755GE with an average score of 29740 and a deltaPct of 0.1, the AMD Ryzen 7 6800HS at 29856 with a deltaPct of -0.3, the AMD Ryzen AI 7 PRO 360 at 29682 with a deltaPct of 0.3, and the AMD Ryzen 7 7840H at 29868 with a deltaPct of -0.3. These tight deltas indicate that the 5800XT performs essentially on par with a range of mobile and desktop chips, with less than 0.3% difference in average scores. For To The Core, this means the CPU is well-positioned among its peers, providing consistent performance without being a standout or a weak link.

How This Combo Ranks

This specific combination of the AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 3070 achieves rank 806 out of 1756 tested combos in To The Core. This places it in the 46th percentile of all combinations, meaning roughly 54% of tested combos perform better in this game. The rank reflects the balance between the CPU and GPU: the RTX 3070, with a percentile rank of 72 among all GPUs, is a solid mid-to-high performer, while the CPU ranks at the 86th percentile. The combo's overall rank is dragged down somewhat by the GPU's lower relative standing compared to the CPU.

The measured FPS data explains this ranking. At 4K Ultra, the combo produces 81.3 FPS, which is respectable but not exceptional when compared to higher-end GPUs that would likely achieve higher frame rates at this resolution. The RTX 3070's average benchmark score is 28238, with nearest rivals including the AMD FirePro S7150 (28409, deltaPct -0.6), AMD Radeon RX 6600 XT (27985, deltaPct 0.9), NVIDIA GeForce GTX 980 Ti (27956, deltaPct 1), and AMD Radeon R9 M295X (28541, deltaPct -1.1). The GPU's performance is within 1% of these rivals, indicating that the 3070 sits in a tight performance cluster. In To The Core, this translates to frame rates that are competitive but not class-leading, which is consistent with a rank near the middle of the database.

The combo rank also reflects the game's nature as an Idle title. Such games often have lower graphical demands than action or simulation genres, meaning that even mid-range GPUs can achieve high frame rates. The RTX 3070's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth are sufficient for the textures and effects in this game, as evidenced by the playable 4K results. The CPU's 8 cores and 16 threads provide ample processing power for game logic, though the single-thread performance is likely the more critical factor for maintaining high FPS at lower resolutions.

Measured FPS Breakdown

The measured FPS data provides a complete picture of performance across three resolutions and four settings levels. At 1920x1080, the combo achieves 357.4 FPS on Low, 299.1 FPS on Medium, 260.9 FPS on High, and 209.4 FPS on Ultra. The spread from Low to Ultra is 148.0 FPS, with each settings tier reducing performance by roughly 40-60 FPS. This indicates that at 1080p, the GPU has significant headroom, and the CPU is able to maintain frame rates well above 200 FPS even at the highest settings.

At 2560x1440, the results are 239.6 FPS on Low, 204.7 FPS on Medium, 175.1 FPS on High, and 141.8 FPS on Ultra. The drop from 1080p to 1440p at each setting is substantial: 117.8 FPS at Low, 94.4 FPS at Medium, 85.8 FPS at High, and 67.6 FPS at Ultra. The diminishing absolute drops as settings increase suggest that at Ultra, the GPU is becoming more of a limiting factor, but the CPU still provides enough performance to keep frame rates high. The 1440p results show that this combo is well-suited for high-refresh-rate monitors at this resolution, with even Ultra settings exceeding 140 FPS.

At 3840x2160, the performance drops further: 134.5 FPS on Low, 115.2 FPS on Medium, 98.4 FPS on High, and 81.3 FPS on Ultra. The transition from 1440p to 4K results in drops of 105.1 FPS at Low, 89.5 FPS at Medium, 76.7 FPS at High, and 60.5 FPS at Ultra. The 4K Low result of 134.5 FPS is still very playable, while 4K Ultra at 81.3 FPS remains above the 60 FPS threshold. The pattern across all settings shows that the GPU is the dominant factor at 4K, with the CPU providing sufficient support to avoid bottlenecking.

The settings-based scaling at each resolution is also instructive. At 1080p, the ratio of Ultra to Low FPS is 209.4/357.4, or approximately 0.586. At 1440p, this ratio is 141.8/239.6, or 0.592. At 4K, it is 81.3/134.5, or 0.604. The consistency of these ratios indicates that the performance cost of increasing settings from Low to Ultra is relatively uniform across resolutions, suggesting that the game's settings primarily affect GPU workload without disproportionately impacting the CPU.

GPU Role

The NVIDIA GeForce RTX 3070 is built on the Ampere architecture with the GA104 chip, manufactured on an 8 nm process at Samsung. It features 5888 shading units, 184 texture mapping units, and 96 raster operation units, along with 46 ray tracing cores and 184 tensor cores. The GPU operates at a base clock of 1500 MHz and a boost clock of 1725 MHz, with memory running at 1750 MHz for 14 Gbps effective speed. The 8 GB of GDDR6 memory is connected via a 256-bit bus, providing 448.0 GB/s of bandwidth. The GPU's FP32 performance is 20.31 TFLOPS, and its texture rate is 317.4 GTexel/s, with a pixel rate of 165.6 GPixel/s.

In To The Core, the GPU's role becomes increasingly important as resolution rises. The 4K results, ranging from 81.3 FPS at Ultra to 134.5 FPS at Low, demonstrate that the RTX 3070 can handle this resolution comfortably. The 8 GB VRAM capacity is sufficient for this game's requirements, as no memory-related bottlenecks are apparent in the measured data. The 448.0 GB/s memory bandwidth supports the texture throughput needed at 4K, where higher resolutions demand more data movement.

The GPU's percentile rank of 72 among all GPUs places it above the median, and its average benchmark score of 28238 is competitive with its nearest rivals. The 3DMark Steel Nomad DX12 score of 3162 indicates solid DirectX 12 performance, which aligns with the game's support for DirectX 12 Ultimate (12_2). The passmark G3D score of 22214 and GPU compute score of 11195 further characterize the GPU's capabilities, though these are general benchmarks rather than game-specific measures.

At 1080p, the GPU is not fully utilized, as evidenced by the 357.4 FPS at Low settings. The CPU's ability to drive such high frame rates means the GPU is likely idle for significant portions of each frame. As resolution increases to 1440p and then 4K, the GPU's workload grows, and the frame rates become more representative of the GPU's raw rendering power. The 4K Ultra result of 81.3 FPS suggests that the RTX 3070 is the limiting factor at this configuration, but it still delivers a smooth experience. The GPU's 220 W TDP and dual-slot design are consistent with its performance class, and the 550 W suggested PSU provides adequate power headroom for this system.