To The Core

To The Core

AVERAGE FPS
194
excellent

This combination delivers exceptional performance with an average of 194 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 81 101 116 140
1440p QHD 141 175 200 241
1080p Full HD 209 260 301 359

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 140
3840x2160 Medium 116
3840x2160 High 101
3840x2160 Ultra 81
2560x1440 Low 241
2560x1440 Medium 200
2560x1440 High 175
2560x1440 Ultra 141
1920x1080 Low 359
1920x1080 Medium 301
1920x1080 High 260
1920x1080 Ultra 209

To The Core with AMD Ryzen 5 9600X + NVIDIA GeForce RTX 3070, In-Depth Analysis

The AMD Ryzen 5 9600X and NVIDIA GeForce RTX 3070 combination delivers exceptionally high frame rates in To The Core, an idle game that scales impressively across resolutions. The measured data shows this pairing is not merely playable but overwhelmingly fast, with average FPS figures that suggest the game is far more demanding of the CPU than the GPU. The benchmark results place this combo at rank 796 out of 1756 tested combinations, indicating a solid mid-upper tier position despite the hardware’s age, with the RTX 3070 being end-of-life and the Ryzen 5 9600X representing a modern Zen 5 architecture.

Resolution Scaling

The frame rate drop from 1080p to 4K reveals a system that is heavily CPU-bound at lower resolutions. At 1080p with Ultra settings, the combo achieves 209.1 FPS, but this climbs dramatically to 358.9 FPS at Low settings. This 149.8 FPS jump between presets at the same resolution indicates significant headroom in the GPU, as the RTX 3070 is not the limiting factor. Moving to 1440p, the Ultra preset drops to 140.6 FPS, a 32.7% reduction from the 1080p Ultra figure, while the Low preset at 1440p still manages 240.6 FPS. The scaling pattern suggests that the CPU’s single-thread performance, which scores 3603 in Cinebench R23, is critical for achieving those high refresh rates.

At 4K, the game becomes more balanced between CPU and GPU. The High preset yields 101 FPS, while Ultra drops to 81.3 FPS. The difference between 1080p Ultra and 4K Ultra is 127.8 FPS, a substantial 61.1% decrease, which is typical for a game that scales resolution demands. However, the fact that 4K Low still produces 139.6 FPS demonstrates that the RTX 3070’s 8 GB of GDDR6 memory and 448.0 GB/s bandwidth are sufficient for this title. The resolution scaling data indicates that players with 1440p or 1080p monitors will be limited by the CPU’s ability to feed frames, while 4K users will see a more balanced workload, though still with excellent playability.

Settings Recommendations

The measured FPS across presets reveals that Ultra settings are entirely viable at every resolution, but the data suggests diminishing returns beyond High. At 1080p, High produces 259.8 FPS, which is 50.7 FPS less than Low’s 358.9 FPS, yet Ultra drops to 209.1 FPS. The gap between High and Ultra at 1080p is 50.7 FPS, which is a notable penalty for what is likely a marginal visual improvement in an idle game. At 1440p, the High preset at 174.5 FPS versus Ultra at 140.6 FPS shows a 33.9 FPS difference, while Medium at 199.5 FPS offers a strong middle ground. For 4K, High at 101 FPS is the sweet spot, as Ultra’s 81.3 FPS is still playable but shows a 19.7 FPS drop.

Given that To The Core is an idle genre title, the visual fidelity differences between Medium and Ultra are likely minimal, making High the recommended preset for most users. The data shows that High consistently delivers over 100 FPS at 4K and over 170 FPS at 1440p, which exceeds the refresh rate of most monitors. For competitive play or high-refresh displays, Medium at 1440p (199.5 FPS) or Low at 1080p (358.9 FPS) are the best choices, as they maximize frame rates while still maintaining acceptable visual quality for an idle game.

How This Combo Ranks

Positioned at rank 796 out of 1756 tested combos, this pairing sits in the 45th percentile of all configurations, which is a strong showing given the RTX 3070’s age. The GPU’s percentile versus all GPUs is 72, and its average benchmark score of 28238 places it close to the AMD Radeon RX 6600 XT, which scores 27985 with a deltaPct of 0.9, meaning the RTX 3070 is 0.9% faster. The CPU’s percentile versus all CPUs is 85, with an average score of 28246, nearly identical to the GPU’s score, suggesting a well-balanced pairing. The Ryzen 5 9600X’s nearest rivals include the Intel Core i5-13490F, which scores 28173 with a deltaPct of 0.3, indicating the AMD chip is 0.3% faster, and the AMD Ryzen 7 8845HS at 28369 with a deltaPct of -0.4.

In the context of To The Core, the combo’s rank is influenced more by the CPU than the GPU. The Ryzen 5 9600X’s 6 cores and 12 threads, with a boost clock of 5.40 GHz, provide the single-thread performance that idle games often require. The data shows that the combo outperforms many newer GPUs in this specific title, likely due to the CPU’s strong Cinebench R23 single-core score of 3603. This rank suggests that users with this hardware can expect excellent performance in To The Core without needing to upgrade for several generations.

Measured FPS Breakdown

The complete FPS data reveals a consistent pattern across all presets and resolutions. At 1080p, the game delivers 358.9 FPS on Low, 301.1 FPS on Medium, 259.8 FPS on High, and 209.1 FPS on Ultra. These figures indicate that the RTX 3070 is barely stressed at 1080p, with the CPU likely being the bottleneck. Moving to 1440p, the numbers are 240.6 FPS (Low), 199.5 FPS (Medium), 174.5 FPS (High), and 140.6 FPS (Ultra). The 1440p Ultra score is still above the 144Hz refresh rate common on many monitors, making this resolution the practical sweet spot for high-refresh gaming.

At 4K, the performance remains strong but shows more differentiation between presets. Low settings produce 139.6 FPS, Medium 116.3 FPS, High 101 FPS, and Ultra 81.3 FPS. The step from Medium to High at 4K is a 15.3 FPS drop, while High to Ultra is a 19.7 FPS drop. This suggests that the GPU’s 8 GB memory capacity and 256-bit bus are sufficient, but the game’s effects at Ultra may be taxing the 5888 shading units. The data shows no min or max FPS values, only averages, which for an idle game is acceptable given the predictable workload.

GPU Role

The NVIDIA GeForce RTX 3070, based on the GA104 chip with Ampere architecture, plays a supporting role in this title. Its 8 GB of GDDR6 memory over a 256-bit bus provides 448.0 GB/s of bandwidth, which is ample for To The Core’s demands. The GPU’s base clock of 1500 MHz and boost clock of 1725 MHz are modest, yet the card still delivers 20.31 TFLOPS of FP32 performance. In the measured data, the GPU’s influence becomes apparent only at 4K Ultra, where the 81.3 FPS represents a 38.8% drop from 4K Low. The card’s 96 ROPs and 184 TMUs handle the game’s texture and pixel work efficiently, as evidenced by the 165.6 GPixel/s pixel rate.

The RTX 3070’s nearest rival, the AMD Radeon RX 6600 XT, performs within 0.9% in average benchmarks, yet the RTX 3070’s 8 GB memory and higher bandwidth give it an edge in memory-intensive scenes. The GPU’s percentile ranking of 72 shows it remains competitive, but in To The Core, the card is rarely the limiting factor. At 1080p and 1440p, the GPU utilization is likely low, as the CPU can produce frames faster than the GPU can render them, particularly at Low settings where the 358.9 FPS figure at 1080p indicates the GPU is not being pushed to its limits.

CPU Role

The AMD Ryzen 5 9600X is the star of this benchmark, with its 6 cores and 12 threads based on the Zen 5 architecture. Its base clock of 3.90 GHz and boost clock of 5.40 GHz, combined with a 65W TDP, make it an efficient powerhouse. The CPU’s single-thread performance is exceptional, scoring 3603 in Cinebench R23, which directly translates to high frame rates in To The Core. The measured data shows that at 1080p Low, the combo achieves 358.9 FPS, a figure that is likely CPU-bound, as the RTX 3070 could theoretically render more frames. The CPU’s 32 MB of shared L3 cache and 89.6 GB/s memory bandwidth provide ample data throughput for the game’s logic.

The Ryzen 5 9600X’s percentile ranking of 85 places it well above the RTX 3070’s 72, indicating that the CPU is the stronger component in this pairing. Its nearest rivals, including the Intel Core i5-13490F and AMD Ryzen 5 230, are within 0.3% in average score, but the 9600X’s higher boost clock gives it an edge in single-threaded workloads. The data suggests that in To The Core, the CPU’s 5.40 GHz boost clock allows it to feed the GPU efficiently, preventing any bottleneck at 1080p and 1440p. For users with high-refresh monitors, this CPU ensures that the GPU is never idle, delivering consistent frame rates that exceed 200 FPS at 1080p Medium and above.

Hardware Specifications

AMD Ryzen 5 9600X

Cores / Threads 6 / 12
Base Clock 3900 MHz
Boost Clock 5400 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 3070

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 1725 MHz MHz
TDP 220 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 9600X + NVIDIA GeForce RTX 3070 in To The Core

Resolution Settings Avg FPS
3840x2160 Low 139.6
3840x2160 Medium 116.3
3840x2160 High 101.0
3840x2160 Ultra 81.3
2560x1440 Low 240.6
2560x1440 Medium 199.5
2560x1440 High 174.5
2560x1440 Ultra 140.6
1920x1080 Low 358.9
1920x1080 Medium 301.1
1920x1080 High 259.8
1920x1080 Ultra 209.1

To The Core with Ryzen 5 9600X + Other GPUs

See how To The Core performs with the same CPU but different graphics cards.

To The Core with RTX 3070 + Other CPUs

See how To The Core performs with the same GPU but different processors.

Other Games with Ryzen 5 9600X + RTX 3070

Explore FPS benchmarks for other games using this same hardware combination.