To The Core

To The Core

AVERAGE FPS
311
excellent

This combination delivers exceptional performance with an average of 311 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 135 164 191 224
1440p QHD 231 288 332 391
1080p Full HD 343 430 486 517

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 224
3840x2160 Medium 191
3840x2160 High 164
3840x2160 Ultra 135
2560x1440 Low 391
2560x1440 Medium 332
2560x1440 High 288
2560x1440 Ultra 231
1920x1080 Low 517
1920x1080 Medium 486
1920x1080 High 430
1920x1080 Ultra 343

To The Core with AMD Ryzen 5 5600X + NVIDIA GeForce RTX 5080, In-Depth Analysis

To The Core is an idle game that, on paper, should not stress a high-end pairing like the AMD Ryzen 5 5600X and NVIDIA GeForce RTX 5080. The measured data, however, tells a more nuanced story that hinges entirely on your display's refresh rate and your tolerance for GPU headroom. This combination is a study in extremes: the CPU is a six-core Zen 3 part from the 5000 series, while the GPU is a Blackwell 2.0 flagship with 16 GB of GDDR7 memory on a 256-bit bus. The result is a system that is almost always GPU-bound at higher resolutions but becomes increasingly CPU-limited as you drop to 1080p, where the frame rates push past the 500 FPS mark.

Settings Recommendations

The data shows a clear hierarchy across all three resolutions tested: Low, Medium, High, and Ultra. At 4K, the progression is remarkably smooth, with average FPS moving from 224.4 on Low, to 191.3 on Medium, to 163.5 on High, and finally down to 134.7 on Ultra. The most significant drop occurs between Low and Medium, a decline of 33.1 FPS, whereas the jump from High to Ultra only costs 28.8 FPS. For a 60 Hz or 120 Hz 4K display, the Ultra preset is the only sensible choice; even at its most demanding, the average of 134.7 FPS leaves enough headroom to prevent any perceptible stutter, and the visual uplift from High to Ultra is worth the performance cost.

At 1440p, the calculus shifts. The average FPS on Ultra is 231.4, which is still far above the refresh rate of most high-end monitors. However, the gap between Low (391.4) and Medium (332.3) is 59.1 FPS, and the gap between Medium and High (287.8) is 44.5 FPS. The data suggests that High is the sweet spot for 1440p. It delivers an average of 287.8 FPS, which is more than enough for any 240 Hz panel, while avoiding the diminishing returns of chasing the extra 56.4 FPS that Medium offers over High. Pushing to Ultra only provides a marginal benefit in visual fidelity for a loss of 56.4 FPS compared to High.

For 1080p, the situation becomes almost absurd. The average FPS on Ultra is 343.2, and on Low it reaches 516.6. The differences between presets are large—a 30.2 FPS gap between High (430.1) and Medium (486.3), and a 48.1 FPS gap between Medium and Low—but they are largely irrelevant. Unless you own a 500 Hz esports monitor, the Low preset is mandatory to maximize the frame rate. The data indicates that at 1080p, the RTX 5080 is never the bottleneck; the CPU's single-thread performance is the limiting factor. The measured results show that the 5600X has a 3dmark_single_thread score of 917, which is the primary driver of these extreme frame rates.

FAQ

Q: Can this combo handle 4K Ultra settings in To The Core?

A: Yes. The measured average FPS at 3840x2160 with the Ultra preset is 134.7. This is comfortably above the 60 FPS threshold for smooth gameplay and even exceeds the 120 Hz refresh rate of many high-end 4K displays, leaving no doubt that the GPU has ample headroom for this title.

Q: Is the AMD Ryzen 5 5600X a bottleneck for the RTX 5080 in this game?

A: Only at 1080p. The data shows that at 1920x1080 with the Low preset, the average FPS is 516.6. This extreme frame rate indicates that the CPU is the limiting component, as the GPU could likely render more frames if the processor could feed it faster. At 1440p and 4K, the frame rates drop to a range where the GPU becomes the primary bottleneck.

Q: What is the performance difference between the Low and Ultra presets?

A: The difference is substantial at every resolution. At 4K, the average FPS drops from 224.4 (Low) to 134.7 (Ultra), a decrease of 89.7 FPS. At 1440p, the drop is from 391.4 to 231.4, a decrease of 160.0 FPS. At 1080p, the drop is from 516.6 to 343.2, a decrease of 173.4 FPS.

Q: How does the RTX 5080's memory configuration influence these results?

A: The GPU has 16 GB of GDDR7 memory on a 256-bit bus, providing 960.0 GB/s of bandwidth. For an idle game like To The Core, this is excessive. The high bandwidth and memory size ensure that there are no texture streaming or asset loading bottlenecks, allowing the measured FPS to scale purely based on the rendering resolution and preset.

Q: Should I lower settings to improve the 1% low FPS?

A: The measured data only provides average FPS values, not minimums. However, given that the average FPS at 4K Ultra is 134.7 and at 1440p Ultra is 231.4, it is highly likely that the minimum FPS remains well above 60 in both cases. The data suggests that this combo is so powerful for this game that even the highest presets are unlikely to introduce stutter.

Q: Is the Ryzen 5 5600X a good match for the RTX 5080 outside of this game?

A: The benchmark data shows the CPU has an avgBenchmarkScore of 20680, placing it in the 78th percentile of all CPUs. The RTX 5080 has an avgBenchmarkScore of 59188, placing it in the 89th percentile of all GPUs. In To The Core, the combo ranks 95th out of 1756 tested combos, indicating that while the pairing works well here, the CPU's age may limit performance in more demanding titles.

How This Combo Ranks

The data places this specific combination of the AMD Ryzen 5 5600X and NVIDIA GeForce RTX 5080 at rank 95 out of 1756 tested combos for To The Core. This top 5.4% placement is impressive, but it is crucial to interpret it correctly. The high rank is driven almost entirely by the GPU's raw power. The RTX 5080, with its passmark_g3d score of 36565, is a top-tier card. The CPU, while not weak, is not the reason for this high ranking; its percentileVsAllCpus is 78, which is lower than the GPU's percentileVsAllGpus of 89.

The combo's rank of 95 suggests that there are 94 other combinations that perform better in this specific game. Given that To The Core is an idle game, the performance ceiling is likely determined by the CPU's single-thread speed. The Ryzen 5 5600X has a boost clock of 4.60 GHz and a 3dmark_single_thread score of 917. Comparatively, its nearest rivals in the CPU benchmark database—the AMD Ryzen 5 5600GT, Intel Core i7-10700, and Intel Core i5-12490F—all have average scores within 0.5% of the 5600X. This indicates that the CPU is not uniquely positioned to push frame rates higher. The 94 combos ahead of this one likely feature newer, faster CPUs that can better feed the RTX 5080 at 1080p.

Measured FPS Breakdown

The complete set of measured average FPS values is as follows:

  • 3840x2160 (4K): The Ultra preset delivers 134.7 FPS. High settings improve this to 163.5 FPS, a gain of 28.8 FPS. Medium settings push the average to 191.3 FPS, a 27.8 FPS improvement over High. Low settings yield 224.4 FPS, a 33.1 FPS gain over Medium. The total spread from Ultra to Low is 89.7 FPS.
  • 2560x1440 (1440p): The Ultra preset averages 231.4 FPS. High settings reach 287.8 FPS, which is 56.4 FPS faster than Ultra. Medium settings produce 332.3 FPS, a 44.5 FPS improvement over High. Low settings deliver 391.4 FPS, a 59.1 FPS gain over Medium. The total spread from Ultra to Low is 160.0 FPS.
  • 1920x1080 (1080p): The Ultra preset averages 343.2 FPS. High settings achieve 430.1 FPS, an 86.9 FPS improvement. Medium settings hit 486.3 FPS, a 56.2 FPS gain over High. Low settings top out at 516.6 FPS, a 30.3 FPS improvement over Medium. The total spread from Ultra to Low is 173.4 FPS.

These numbers reveal a consistent pattern: the performance cost of each settings tier is not linear. The jump from Ultra to High is always significant, but the jump from High to Medium is often smaller, and the jump from Medium to Low is sometimes the largest. This suggests that the Ultra preset includes some particularly demanding effects, while the Low preset disables all of them.

Resolution Scaling

The data shows how the RTX 5080's workload scales with resolution. Moving from 1080p to 1440p on the Ultra preset reduces the average FPS from 343.2 to 231.4, a drop of 32.6%. Moving from 1440p to 4K on the same preset reduces the average from 231.4 to 134.7, a drop of 41.8%. This scaling is typical for a GPU-bound scenario, where the number of pixels rendered quadruples from 1080p to 4K, but the frame rate does not drop by a proportional amount due to other bottlenecks.

The more telling analysis comes from comparing the Low preset across resolutions. At 1080p Low, the average is 516.6 FPS. At 1440p Low, it is 391.4 FPS, a drop of 24.2%. At 4K Low, it is 224.4 FPS, a drop of 42.7% from 1440p. The fact that the 1080p-to-1440p drop is smaller than the 1440p-to-4K drop indicates that at 1080p Low, the system is hitting a CPU limit. The Ryzen 5 5600X, with its 6 cores and 12 threads, cannot generate the draw calls fast enough to keep the GPU fully occupied at such a low rendering load. Once the resolution increases to 4K, the GPU's fill rate becomes the primary constraint, and the scaling becomes more linear.

CPU Role

The AMD Ryzen 5 5600X is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer. It has a base clock of 3.70 GHz and a boost clock of 4.60 GHz. This is a CPU with strong single-thread performance, as evidenced by its 3dmark_single_thread score of 917 and its Cinebench R23 single-core score of 2622. In To The Core, an idle game, the CPU's role is primarily to handle game logic, simulation, and draw calls, which are largely single-threaded tasks.

The benchmark results confirm that this CPU is a limiting factor only at 1080p. The data shows that at 1080p Low, the average FPS is 516.6. This is likely close to the maximum frame rate the 5600X can produce, regardless of the GPU. The RTX 5080's passmark_gpu_compute score of 21789 indicates it has massive compute power, but it is idle waiting for the CPU at this resolution. At 4K, the CPU's 51.2 GB/s of DDR4 memory bandwidth and 32 MB of L3 cache are sufficient to feed the GPU, as the frame rate is dictated by the GPU's rendering speed.

The CPU's 65 W TDP and 7 nm process node mean it runs cool and efficiently, but its performance relative to modern rivals is modest. Its avgBenchmarkScore of 20680 is nearly identical to the Intel Core i7-10700 (20746) and the AMD Ryzen 5 5600GT (20740). This means that in To The Core, the 5600X is not providing any unique advantage; any of these CPUs would yield nearly identical frame rates. The high combo rank is almost entirely a function of the RTX 5080's dominance, not the CPU's prowess.

Hardware Specifications

AMD Ryzen 5 5600X

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 4600 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 5080

VRAM 16 GB GDDR7
Base Clock —
Boost Clock 2617 MHz MHz
TDP 360 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5600X + NVIDIA GeForce RTX 5080 in To The Core

Resolution Settings Avg FPS
3840x2160 Low 224.4
3840x2160 Medium 191.3
3840x2160 High 163.5
3840x2160 Ultra 134.7
2560x1440 Low 391.4
2560x1440 Medium 332.3
2560x1440 High 287.8
2560x1440 Ultra 231.4
1920x1080 Low 516.6
1920x1080 Medium 486.3
1920x1080 High 430.1
1920x1080 Ultra 343.2

To The Core with Ryzen 5 5600X + Other GPUs

See how To The Core performs with the same CPU but different graphics cards.

To The Core with RTX 5080 + Other CPUs

See how To The Core performs with the same GPU but different processors.

Other Games with Ryzen 5 5600X + RTX 5080

Explore FPS benchmarks for other games using this same hardware combination.