Thief

Thief

AVERAGE FPS
31
playable

This combination offers playable performance with an average of 31 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 13 13 20 27
1440p QHD 26 24 31 41
1080p Full HD 35 35 47 60

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 27
3840x2160 Medium 20
3840x2160 High 13
3840x2160 Ultra 13
2560x1440 Low 41
2560x1440 Medium 31
2560x1440 Ultra 26
2560x1440 High 24
1920x1080 Low 60
1920x1080 Medium 47
1920x1080 High 35
1920x1080 Ultra 35

Thief with Intel Core i5-9400 + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis

The benchmark data for Thief with the Intel Core i5-9400 and NVIDIA GeForce GTX 1050 Ti shows a combination that is heavily constrained by the graphics card, particularly at higher resolutions. The measured results provide a clear picture of where this system can deliver a playable experience and where it falls short.

Settings Recommendations

The measured FPS rows indicate that the Low preset is the only configuration that consistently approaches or exceeds standard playability thresholds across all tested resolutions. At 1920x1080, the Low preset achieves an average of 59.5 FPS, which is the highest recorded frame rate for any settings/resolution combination in this dataset. This represents a 26% improvement over the Medium preset’s 47.2 FPS at the same resolution. The data strongly suggests that Low is the intended operating point for this pairing.

Moving to Medium at 1080p yields a playable but less fluid experience, with the 47.2 FPS average leaving less headroom for demanding scenes. The High preset at 1080p drops to 35.1 FPS, and the Ultra preset is only marginally lower at 34.6 FPS, indicating that the jump from High to Ultra carries a minimal performance penalty relative to the step from Medium to High. For users prioritizing visual fidelity over frame rate, Medium presents the best compromise, as it maintains a frame rate above 30 FPS while offering a noticeable upgrade over Low.

At 2560x1440, the situation becomes more constrained. The Low preset manages 40.5 FPS, which is still technically playable, but Medium drops to 31 FPS, and High falls to 23.8 FPS. Ultra at this resolution is nearly unplayable at 25.7 FPS. At 3840x2160, no preset delivers a playable experience; even Low averages only 26.7 FPS, and Ultra falls to 12.5 FPS. Consequently, the recommendation is clear: for any resolution above 1080p, the Low preset is the only viable option, and 4K should be avoided entirely.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is the primary performance limiter in this configuration. Its 4 GB of GDDR5 memory on a 128-bit bus provides a bandwidth of 112.1 GB/s, which is adequate for 1080p gaming but becomes a bottleneck as resolution increases. The GPU’s base clock of 1291 MHz and boost clock of 1392 MHz are modest, reflecting its position in the GeForce 10-series lineup. The card’s 768 shading units and 32 ROPs handle the pixel workload, but the data shows that this hardware is not designed for high-resolution rendering.

The benchmark results bear this out. At 1080p with Low settings, the card produces 59.5 FPS, which is nearly double the 35.1 FPS achieved at High settings. This steep drop-off indicates that the GPU’s fill rate and memory bandwidth are quickly saturated as texture quality and shading complexity increase. The 3DMark Steel Nomad DX12 score of 305 and PassMark G3D score of 6340 place the card in the 30th percentile of all GPUs, confirming its entry-level status. Its nearest rivals, such as the NVIDIA GeForce 940M with a score of 5297, show a deltaPct of 0.4%, meaning the GTX 1050 Ti is only marginally faster, yet it still struggles with this 2014 title at higher settings.

How This Combo Ranks

Within the database of tested combinations for Thief, this pairing of the Core i5-9400 and GTX 1050 Ti ranks 1617 out of 1642 combos. This places it in the bottom 1.5% of all tested systems for this game, a position that reflects the GPU’s limited capabilities rather than the CPU’s. The combo rank is a holistic measure, and the data indicates that the graphics card is the anchor dragging down the overall score.

The GPU’s average benchmark score of 5316, compared to its nearest rival the NVIDIA GeForce 930A at 5317, shows a near-identical performance level, yet even that rival would likely rank similarly low in this game. The CPU, by contrast, performs far better relative to its peers. The Core i5-9400 has an average benchmark score of 2305, which places it in the 50th percentile of all CPUs. Its nearest rival, the Intel Core i3-10305, scores 2300 with a deltaPct of 0.2%, indicating that the i5-9400 is effectively on par with that chip. This disparity between the CPU’s mid-range standing and the GPU’s bottom-quartile ranking explains the low combo rank: the system is imbalanced, with a processor capable of feeding a faster graphics card than the one installed.

Measured FPS Breakdown

The measured FPS data provides a detailed view of performance across three resolutions and four settings presets. At 1920x1080, the frame rates range from 59.5 FPS on Low to 34.6 FPS on Ultra. The progression is not linear: Low to Medium is a 20.7% drop, Medium to High is a 25.6% drop, and High to Ultra is a modest 1.4% drop. This pattern suggests that the High and Ultra presets share similar rendering workloads, likely due to diminishing returns in shadow quality or post-processing effects.

At 2560x1440, all frame rates fall below the 1080p figures. Low produces 40.5 FPS, Medium 31 FPS, High 23.8 FPS, and Ultra 25.7 FPS. Notably, Ultra is slightly faster than High at this resolution, which may indicate a driver or measurement anomaly, but the difference is within the margin of error. The 1440p data shows that the GPU’s memory bandwidth is insufficient to maintain playable frame rates above Medium settings.

At 3840x2160, the performance collapses entirely. Low averages 26.7 FPS, Medium 20.2 FPS, High 13.2 FPS, and Ultra 12.5 FPS. None of these are playable, and the 4K results confirm that this combination is not suitable for that resolution. The step from 1440p to 4K at Low settings represents a 34% reduction in frame rate, while the same step at Ultra settings is a 51% reduction, highlighting how the GPU’s limitations are exacerbated at higher pixel counts.

Resolution Scaling

The data shows a clear and predictable degradation as resolution increases from 1080p to 4K. At Low settings, the frame rate drops from 59.5 FPS at 1080p to 40.5 FPS at 1440p, a 32% reduction, and then to 26.7 FPS at 4K, a further 34% reduction. This scaling pattern is consistent with a GPU-bound workload, where the number of pixels to be rendered directly impacts performance. The 1080p to 1440p drop is steeper than the 1440p to 4K drop in percentage terms, which is typical for a card with limited memory bandwidth.

At Ultra settings, the pattern is similar but with lower absolute values. The frame rate moves from 34.6 FPS at 1080p to 25.7 FPS at 1440p, a 25.7% reduction, and then to 12.5 FPS at 4K, a 51.4% reduction. The larger percentage drop from 1440p to 4K at Ultra settings suggests that the GPU’s shading units are overwhelmed by the combination of high pixel count and complex shaders. This scaling behavior indicates that the limiting component is unequivocally the GPU. If the CPU were the bottleneck, the frame rates would remain more constant across resolutions, but the data shows a strong negative correlation between pixel count and performance.

CPU Role

The Intel Core i5-9400 provides six cores and six threads with a base clock of 2.90 GHz and a boost clock of 4.10 GHz. This is a capable processor for gaming, as evidenced by its Cinebench R23 multi-core score of 7969 and single-core score of 1125. The CPU’s 9 MB of shared L3 cache and dual-channel DDR4 memory support at 42.7 GB/s bandwidth are sufficient for feeding a mid-range graphics card. However, in this configuration, the CPU is not the limiting factor.

The evidence for this lies in the resolution scaling. If the CPU were the bottleneck, we would expect frame rates to be similar across 1080p, 1440p, and 4K, but they are not. The CPU’s percentile rank of 50th overall, with an average benchmark score of 2305, places it in the middle of the pack, but its nearest rivals in the database only differ by fractions of a percent. The Core i7-8809G, which scores 2319, is only 0.6% faster, indicating that the i5-9400 is not a weak link.

In Thief, the CPU’s six cores are likely sufficient for the game’s AI and physics calculations, but the GPU’s inability to keep up means the CPU is often idle waiting for frames to be rendered. The measured FPS at 1080p Low of 59.5 FPS is close to the threshold where a CPU bottleneck might begin to appear, but the fact that lowering resolution further to 1440p only reduces the frame rate to 40.5 FPS confirms that the GPU is still the primary constraint. The CPU’s boost clock of 4.10 GHz provides enough single-thread performance for the game’s core logic, but no amount of CPU headroom can compensate for the GPU’s limited pixel throughput.

Hardware Specifications

Intel Core i5-9400

Cores / Threads 6 / 6
Base Clock 2900 MHz
Boost Clock 4100 MHz
TDP 65W
Socket Intel Socket 1151
View Full CPU Details →

NVIDIA GeForce GTX 1050 Ti

VRAM 4 GB GDDR5
Base Clock —
Boost Clock 1392 MHz MHz
TDP 75 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-9400 + NVIDIA GeForce GTX 1050 Ti in Thief

Resolution Settings Avg FPS
3840x2160 Low 26.7
3840x2160 Medium 20.2
3840x2160 High 13.2
3840x2160 Ultra 12.5
2560x1440 Low 40.5
2560x1440 Medium 31.0
2560x1440 Ultra 25.7
2560x1440 High 23.8
1920x1080 Low 59.5
1920x1080 Medium 47.2
1920x1080 High 35.1
1920x1080 Ultra 34.6

Thief with ii5-9400 + Other GPUs

See how Thief performs with the same CPU but different graphics cards.

Other Games with ii5-9400 + GTX 1050 Ti

Explore FPS benchmarks for other games using this same hardware combination.