Thief

Thief

AVERAGE FPS
29
limited

This combination may struggle with this title, averaging 29 FPS. Consider upgrading hardware or significantly lowering settings.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 10 13 17 21
1440p QHD 18 24 31 39
1080p Full HD 28 37 48 59

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 21
3840x2160 Medium 17
3840x2160 High 13
3840x2160 Ultra 10
2560x1440 Low 39
2560x1440 Medium 31
2560x1440 High 24
2560x1440 Ultra 18
1920x1080 Low 59
1920x1080 Medium 48
1920x1080 High 37
1920x1080 Ultra 28

Thief with Intel Core i5-13400F + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis

Thief is a 2014 stealth title that still demands a balanced system, and this combination of an Intel Core i5-13400F with a NVIDIA GeForce GTX 1050 Ti shows exactly what happens when a very capable modern CPU is paired with a legacy entry-level GPU. The benchmark data reveals a system that is almost entirely GPU-bound, with the graphics card struggling to maintain playable frame rates at any resolution above 1080p. The results clearly show that while the processor has ample headroom, the GTX 1050 Ti is the decisive bottleneck, and any performance tuning needs to focus on the graphics settings rather than the system's processing power. The data indicates a working but severely limited experience, one that is only viable at lower resolutions and settings. For a game like Thief, which emphasizes stealth and atmosphere, the resulting frame rate dips could be a serious hindrance. The measured average frame rates across all resolutions and settings paint a consistent picture: this is a combination for 1080p gaming with reduced quality settings, and little else.

Resolution Scaling

The measured frame rates in Thief show a steep performance drop as resolution increases, and this is the clearest indicator that the GPU is the limiting component. At 1920x1080 with Low settings, the combination achieves an average of 59 FPS. This is the only setting/resolution pairing that hits a 60 FPS-like figure, which is just enough for smooth, basic playability in a stealth game. Moving up to 2560x1440 with the same Low settings, the average FPS falls to 39, a drop of 20 frames per second, or a 33.9% reduction. This is a massive penalty for a single resolution step, and it points directly at the GPU's inability to keep up with the increased pixel count. At 3840x2160 with Low settings, the average further collapses to 21 FPS, representing another 46.2% drop from the 1440p figure. The trend is clear: the GTX 1050 Ti is simply not capable of rendering Thief at 4K, and this is evident even at the lowest quality preset.

At Medium settings, the resolution scaling curve is very similar. At 1080p, the average is 48 FPS, which is 11 FPS behind Low settings. At 1440p, the average is 31 FPS, and at 4K it is 17 FPS. The 1080p to 1440p drop is 17 FPS, a 35.4% reduction, and the 1440p to 2160p drop is 14 FPS, a 45.2% reduction. This pattern of percentage drops is consistent, reinforcing that the GPU's pixel throughput is the primary constraint. The High settings at 1080p average 37 FPS, at 1440p it is 24 FPS (a 35.1% drop), and at 2160p it is 13 FPS (a 45.8% drop). The Ultra settings show the same relative behavior, but from a lower starting point: 28 FPS at 1080p, 18 FPS at 1440p (a 35.7% drop), and 10 FPS at 2160p (a 44.4% drop).

The data shows that the resolution scaling is almost perfectly proportional to pixel count, which is a classic sign of a GPU-limited scenario. The CPU is not the issue here. The CPU is a high-end 10-core processor, and the frame rate drops are far too steep to be caused by it. The near-identical percentage drops across all settings presets (around 35% for the 1080p to 1440p step and around 45% for the 1440p to 2160p step) are the hallmark of a graphics card that is simply out of its depth as the render resolution climbs.

This 4K scaling behavior also tells us that even if a user were to lower settings at 4K, the game would remain unplayable. The best 4K result is only 21 FPS on Low settings, which is below the threshold for a smooth experience in a stealth game, where timing and reaction matter. The conclusion from the resolution scaling data is that this system is intended for 1080p operation. Any attempt to run the game at higher resolutions will result in a slideshow, regardless of the quality settings. The 1440p data, while better than 4K, is still not good enough for a consistently smooth experience, with the top score on Low settings being 39 FPS.

How This Combo Ranks

The combined performance of the Intel Core i5-13400F with the GTX 1050 Ti in Thief places this system in the lower echelon of tested hardware combinations. The data shows that this combination ranks 3707th out of 3720 possible combos in the game's benchmark suite. This puts the system in the 0.35 percentile of all tested pairings, meaning that only a mere 13 combos rank lower. This is not a good showing, and it is a direct consequence of the GPU's age. The CPU is a modern, high-performance part, but the GTX 1050 Ti is a 2016 entry-level card. The pairing is heavily unbalanced.

The ranking is a clear indication that the GTX 1050 Ti is a massive bottleneck. The CPU is in the 77th percentile of all CPUs, and has a Cinebench R23 multi-core score of 22604 points, showing it can handle modern workloads. The GPU, however, sits in the 25th percentile of all GPUs, with an average benchmark score of 4193. This is a severe mismatch. The combo rank is not a reflection of the CPU's capabilities but rather it is the immediate limit of the GPU. Other tested combos with this exact GPU and a lower-performing CPU would likely score nearly the same. The rank is so low because the GPU is so weak that it holds back any CPU paired with it.

The data from the game's benchmark is a clear demonstration of the sink-or-swim nature of PC gaming. A system is only as strong as its weakest link, and here the GTX 1050 Ti is extremely weak. The 3DMark Steel Nomad DX12 score for the GPU is just 305 points, and its Passmark DirectX 12 score is 26. These are very low. The GPU cannot handle modern rendering workloads, and Thief, while a 2014 title, still requires a certain level of GPU power. The combo rank indicates that the user will have to rely on the game's Low settings and 1080p resolution to get any acceptable level of performance. The data shows that this is not a viable pairing for any form of high-fidelity gaming, and the experience will be one of low frame rates and significant visual compromises.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is the clear limiting factor in this system, and the game's benchmark results are a direct reflection of its capabilities. The GPU is built on the 14nm Pascal architecture and features 768 shading units, 48 texture mapping units (TMUs), and 32 Raster output units (ROPs). It has a base clock of 1291 MHz and a boost clock of 1392 MHz. Its memory is 4 GB of GDDR5 on a 128-bit bus, providing a bandwidth of 112.1 GB/s. These are entry-level specs for a modern GPU, and they show in the benchmarks.

In Thief, the GPU's performance is low at every resolution. The 4 GB memory buffer is likely a constraint at 4K, where textures and frame data can exceed the capacity, but the biggest issue is raw compute and fill rate. The GPU's fill rates are 44.54 GPixels/s and 66.82 GTexels/s. These are modest numbers. The game's resolution scaling shows that the pixel fill rate is the bottleneck. As resolution increases, the frame rate drops proportionally, which is a classic sign of a GPU that lacks enough ROPs and pixel throughput. At 1080p with Low settings, the game is playable at 59 FPS, but at 1440p Low, it drops to 39 FPS, and at 4K Low it is just 21 FPS. This is a direct result of the GPU's inability to output pixels.

The GPU's benchmark scores also support this. Its Passmark G3D score is 6340, its Geekbench OpenCL score is 18129, and its Geekbench Vulkan score is 10001. The 3DMark Steel Nomad DX12 score is only 305, which is a very low score and shows the GPU's limitations in modern APIs to a degree. The GTX 1050 Ti was never designed for high-resolution gaming, and Thief exposes it. The GPU is also a 75W card with a 250W suggested PSU, indicating it is a low-power, entry-level design. Its performance percentile is 25, and its nearest rivals in terms of average score are the AMD Radeon R5 M330 (99.4% of its score), the NVIDIA Quadro K2100M (99.0%), and the NVIDIA Quadro K3000M (101.1%). This places it right at the bottom of the GPUs. The data clearly shows that when playing Thief, the user is completely GPU-bound, and the CPU is left waiting. The GPU is simply not going to provide a good experience at any resolution above 1080p.

FAQ

Q: Can this combination run Thief at 4K resolution?

A: No. The measured average frame rates at 3840x2160 are 10 FPS on Ultra, 13 FPS on High, 17 FPS on Medium, and 21 FPS on Low. All are below playable levels.

Q: What is the highest playable setting and resolution for this setup?

A: The data shows that 1920x1080 with Low settings is the only combination that achieves a 59 FPS average. The High preset at 1080p is 37 FPS, so it is playable but not ideal.

Q: Is the Intel Core i5-13400F the reason for the low frame rates?

A: No. The CPU is in the 77th percentile of CPUs and has a Cinebench R23 multi-core score of 22604. The GPU is the bottleneck. The frame rates drop proportionally with resolution, which is a sign of a GPU limit.

Q: How does this system compare to other GPU combos in the database?

A: This pair ranks 3707th out of 3720 tested combos in Thief, placing it in the bottom 0.4% of all tested systems. It is outperformed by the vast majority of configurations.

Q: What is the GTX 1050 Ti's memory configuration and how does it affect this game?

A: The GPU has 4 GB of GDDR5 memory on a 128-bit bus, giving it a bandwidth of 112.1 GB/s. This is a modest amount, and it is likely not a limiting factor at 1080p but could be a problem at higher resolutions if there is not enough memory. The main issue is the GPU's fill rate.

Q: Should I use the Ultra preset at 1080p?

A: The Ultra preset at 1080p yields a 28 FPS average. This is below the 30 FPS threshold for playable, so the Low or Medium presets are more appropriate. The Medium preset at 1080p gives 48 FPS average, which is a better experience.

5. Settings Recommendations

The measured data provides a clear path for getting the best experience out of this system in Thief. The first and most important recommendation is to play at 1920x1080 resolution. The game at 1440p and 4K is not viable, as the frame rates drop to 39 FPS at best (Low, 1440p) and 21 FPS at best (Low, 4K). These are too low for a smooth game play experience in a stealth game that requires precise timing. At 1080p, the user has three viable options: Low, Medium, and High.

The Low preset at 1080p yields an average of 59 FPS, which is the highest average recorded for this system and the only one that hits the 60 FPS target. This is the recommended preset for a responsive, smooth experience. The Medium preset at 1080p provides a 48 FPS average, which is still playable but with a noticeable drop in smoothness. The High preset at 1080p, with a 37 FPS average, is borderline but may be acceptable for some users. The Ultra preset at 1080p, with a 28 FPS average, is not recommended because it drops below the 30 FPS threshold, which is generally considered the minimum for a good experience.

The data shows a clear trade-off between visual quality and frame rate. The Low preset at 1080p is the only setting that offers a near-60 FPS experience. If the user is willing to accept a lower frame rate, the Medium preset at 48 FPS is a decent middle ground, but the Low preset is the safest recommendation for smooth, reliable gameplay. The High preset at 37 FPS is a compromise that is only suitable if the user is very sensitive to visual quality and less to frame rate. The Ultra preset is not a good choice for this setup. The 1440p and 4K resolutions are not recommended because all settings presets are below the 30 FPS threshold, with the exception of Low at 1440p which is 39 FPS. The data shows that the best experience by a significant margin is the 1080p Low preset, which is the only combination that approaches the 60 FPS mark. For a stealth game where reactions matter, this is the only viable choice.

CPU Role

The CPU in this setup is an Intel Core i5-13400F, a 13th-gen Raptor Lake processor. It has 10 cores and 16 threads, with base clock of 2.50 GHz and a boost clock of 4.60 GHz. It has a 20 MB L3 cache and a 65W TDP. The CPU is a very powerful processor, as evidenced by its benchmarks: it scores 3191 in Cinebench R23 single-core, 22604 in multi-core, and 3634 in Passmark single-thread. It is also in the 77th percentile of all CPUs. This is a processor that is more than capable of handling Thief's CPU demands. Thief is a 2014 title, so it is not a heavily threaded game, but the high single-core performance of the i5-13400F is more than enough to keep up with the game's logic.

The game's data shows that the CPU is not a bottleneck. The frame rates are consistent with a GPU-bound scenario at all resolutions. The performance scaling with resolution is perfectly linear, which is a sign that the CPU is not the limiting factor. The CPU is doing its job, and the GPU is the one causing the low frame rates. The data confirms that the GPU is the bottleneck. The CPU's high performance means that it is not holding back the system, but it is also not being fully utilized. In this case, the CPU is a wasted potential, as the GPU is too weak to make proper use of the CPU's power. The CPU is a 65W part with a boost clock of 4.60 GHz, and it is a very strong performer for its class. The core count of 10 with 16 threads is also more than enough for modern games, and Thief is no exception. The CPU's performance is not a concern. The only concern is the GPU, which is clearly the limiting factor. The data shows that the system would benefit from a GPU upgrade far more than a CPU upgrade. The CPU has more than enough headroom for a better GPU, and this is a case where the CPU is not a consideration for the game's performance. The game's performance is entirely in the hands of the GTX 1050 Ti. The CPU is a strong processor with a high single-core score in the 77th percentile, but it is effectively waiting for the GPU to catch up. The data shows that the CPU is not the bottleneck. The system is a classic example of a pairing a modern CPU with a legacy GPU, and the results are as expected: the GPU is the limiting factor, and the CPU is not a factor in the game's performance. The CPU is a very good processor for Thief, and it is not the problem. The problem is the GPU. The data is clear.

Hardware Specifications

Intel Core i5-13400F

Cores / Threads 10 / 16
Base Clock 2500 MHz
Boost Clock 4600 MHz
TDP 65W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce GTX 1050 Ti

VRAM 4 GB GDDR5
Base Clock —
Boost Clock 1392 MHz MHz
TDP 75 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-13400F + NVIDIA GeForce GTX 1050 Ti in Thief

Resolution Settings Avg FPS
3840x2160 Low 21.0
3840x2160 Medium 17.0
3840x2160 High 13.0
3840x2160 Ultra 10.0
2560x1440 Low 39.0
2560x1440 Medium 31.0
2560x1440 High 24.0
2560x1440 Ultra 18.0
1920x1080 Low 59.0
1920x1080 Medium 48.0
1920x1080 High 37.0
1920x1080 Ultra 28.0

Thief with ii5-13400F + Other GPUs

See how Thief performs with the same CPU but different graphics cards.

Thief with GTX 1050 Ti + Other CPUs

See how Thief performs with the same GPU but different processors.

Other Games with ii5-13400F + GTX 1050 Ti

Explore FPS benchmarks for other games using this same hardware combination.