Thief

How This Combo Ranks

The AMD Ryzen 7 5800XT paired with the NVIDIA GeForce RTX 4060 combo ranks 866th out of 1,642 tested combinations for Thief, placing it in the upper-middle tier of all possible system configurations. This ranking is measured against every CPU-GPU pairing in the database, and it indicates a system that delivers reliably smooth performance at mainstream resolutions while falling short of top-tier 4K dominance. The CPU itself sits in the 86th percentile among all processors, with an average benchmark score of 29,774, placing it just 0.1% ahead of the AMD Ryzen 7 PRO 5755GE and 0.3% ahead of the AMD Ryzen AI 7 PRO 360, while trailing the AMD Ryzen 7 6800HS and AMD Ryzen 7 7840H by 0.3% each. On the GPU side, the RTX 4060 holds the 66th percentile among all graphics cards, with an average score of 23,181, which puts it 0.6% behind the AMD Radeon RX 6600M and 0.7% behind the NVIDIA GeForce GTX 780 Ti, while leading the Intel Arc B580 by 0.7% and the AMD Radeon 760M by 0.8%. In the context of Thief, this rank of 866 out of 1,642 means the combo sits comfortably within the top 53% of all systems, a position driven more by the GPU's mid-range standing than by the CPU's strong single-threaded performance. The Ryzen 7 5800XT delivers a single-thread score of 959 in 3DMark, which is a solid foundation for a game from 2014 that relies heavily on single-core efficiency. The data shows that at 1080p, this combination is rarely the bottleneck, but as resolution climbs, the GPU's limitations become increasingly apparent, dragging the overall rank down from what the CPU alone would suggest.

GPU Role

The NVIDIA GeForce RTX 4060 is built on the Ada Lovelace architecture with a 5 nm process from TSMC, packing 18,900 million transistors into a 159 mm² die. Its memory configuration consists of 8 GB of GDDR6 on a 128-bit bus, yielding a bandwidth of 272.0 GB/s, with memory clocked at 2125 MHz (17 Gbps effective). The GPU's base clock is 1830 MHz, boosting to 2460 MHz, and it features 3,072 shading units, 96 texture mapping units, and 48 raster output units. The card also includes 24 ray tracing cores and 96 tensor cores, supporting DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4. In Thief, the GPU's role is decisive at higher resolutions. The measured frames per second at 4K Ultra drop to 42.1 FPS, which is just below the 45.9 FPS seen at 4K High, and the gap between Low and Ultra at 4K is substantial—75.6 FPS versus 42.1 FPS, a difference of 33.5 FPS. This spread indicates that the RTX 4060's 8 GB frame buffer and 128-bit memory interface become limiting factors when the resolution demands more bandwidth and capacity. The GPU's passmark G3D score of 19,545 and its passmark DirectX 11 score of 175 suggest it handles older DirectX titles like Thief with reasonable efficiency, but the 128-bit bus is a known constraint for higher-resolution textures. At 1080p, the GPU has headroom, as evidenced by the 173.1 FPS at Low settings, but the frame rate falls off rapidly as settings and resolution increase, showing that the GPU is the primary component governing performance in this pairing for Thief.

Resolution Scaling

The measured FPS data reveals a clear pattern of performance degradation as resolution increases from 1080p to 4K, and this scaling tells a story about which component is the limiting factor. At 1080p High, the combo achieves 107.7 FPS, which drops to 75.9 FPS at 1440p High—a 29.5% reduction—and then to 45.9 FPS at 4K High, a 39.5% further drop from 1440p. The same trend holds across all settings. At Low, the system runs 173.1 FPS at 1080p, 125.9 FPS at 1440p, and 75.6 FPS at 4K, showing a 27.3% drop from 1080p to 1440p and a 40.0% drop from 1440p to 4K. The scaling from 1080p to 4K at Low settings is a 56.4% reduction in frame rate, which is a steep decline that points directly to the GPU's memory bandwidth and capacity limits. The CPU, with its 8 cores and 16 threads, is not the constraint here; its 3DMark multi-thread score of 7,683 and Cinebench R23 multi-core score of 23,794 indicate ample processing power for a game like Thief, which was released in 2014 and does not demand modern multi-threaded workloads. The data shows that the FPS drop is not linear with pixel count—going from 1440p to 4K increases pixel count by 2.25 times, but the frame rate drops by roughly 40% instead of the theoretical 55% if the GPU were fully saturated. This suggests that while the GPU is the bottleneck, it is not completely overwhelmed, and the CPU can still feed it adequately at 4K. The 1080p to 1440p drop is steeper proportionally than the 1440p to 4K drop in some settings, indicating that the GPU's fill rate and memory bandwidth are the primary constraints, with the CPU providing sufficient headroom across all resolutions.

Settings Recommendations

The measured rows provide a clear picture of how settings presets affect performance, and the data supports a specific recommendation for the best experience on this combo. At 1080p, the Ultra preset delivers 100.2 FPS, which is only 7.5 FPS lower than High at 107.7 FPS, and both are well above the 60 FPS threshold for smooth gameplay. The Medium preset at 1080p hits 140.1 FPS, which is a 39.9 FPS improvement over Ultra, but the visual fidelity loss may not justify the extra frames for a stealth game where immersion matters. At 1440p, the High preset achieves 75.9 FPS, which is playable, while Ultra drops to 70.4 FPS, still above 60 FPS but with diminishing returns. The Medium preset at 1440p produces 96.4 FPS, which is a 26.0 FPS gain over High, making it the sweet spot for 1440p if frame rate is prioritized. At 4K, the situation changes drastically. Ultra yields 42.1 FPS, which is below the playable threshold, and High is only marginally better at 45.9 FPS. The Medium preset at 4K reaches 55.9 FPS, which is approaching playable but still below 60 FPS, while Low hits 75.6 FPS, which is the only 4K preset that provides a truly smooth experience. The data recommends that for a balance of visual quality and performance, the High preset at 1080p is the best choice, delivering 107.7 FPS with no need for compromise. For 1440p, the High preset at 75.9 FPS is the recommended setting, as it maintains the visual experience while staying comfortably above 60 FPS. At 4K, users should either drop to Low settings for 75.6 FPS or accept Medium at 55.9 FPS if they prioritize visuals over frame rate. The Ultra preset is not recommended at any resolution above 1080p, as the frame rate drops below 60 FPS at 1440p and falls to 42.1 FPS at 4K, which compromises the stealth gameplay experience.

FAQ

Q: What is the combo's overall ranking in Thief?

A: The AMD Ryzen 7 5800XT with the NVIDIA GeForce RTX 4060 ranks 866th out of 1,642 tested combinations for Thief, placing it in the upper-middle tier of all systems.

Q: How does the CPU compare to its nearest rivals in average benchmark score?

A: The Ryzen 7 5800XT has an average benchmark score of 29,774, which is 0.1% higher than the AMD Ryzen 7 PRO 5755GE (29,740) and 0.3% higher than the AMD Ryzen AI 7 PRO 360 (29,682), but 0.3% lower than both the AMD Ryzen 7 6800HS (29,856) and the AMD Ryzen 7 7840H (29,868).

Q: What is the frame rate difference between 1080p and 4K at High settings?

A: At High settings, the combo delivers 107.7 FPS at 1080p and 45.9 FPS at 4K, representing a 61.8 FPS drop or a 57.4% reduction in performance when moving from 1080p to 4K.

Q: Which resolution and settings combination provides the highest frame rate?

A: The highest measured frame rate is 173.1 FPS, achieved at 1080p with Low settings. This is the only configuration that exceeds 170 FPS in the measured data.

Q: Is the Ultra preset playable at 1440p?

A: Yes, the Ultra preset at 1440p delivers 70.4 FPS, which is above the 60 FPS playability threshold, though it is 5.5 FPS lower than High settings at the same resolution.

Q: How does the GPU's average benchmark score compare to the AMD Radeon RX 6600M?

A: The NVIDIA GeForce RTX 4060 has an average benchmark score of 23,181, which is 0.6% lower than the AMD Radeon RX 6600M's score of 23,321.