Thief

The AMD Ryzen 7 5700X3D and NVIDIA GeForce RTX 2060 combination produces a wide range of frame rates in Thief, from 144.7 FPS at 1080p Low to 31.5 FPS at 4K Ultra. Measured data shows the combo ranks 1371 out of 1642 tested configurations, meaning 1370 other combos perform better in this game. The CPU’s 8-core/16-thread design and 96 MB L3 cache provide strong processing headroom, while the GPU’s 6 GB VRAM and 336 GB/s bandwidth become the limiting factor as resolution climbs.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and consistent across all settings. At High settings, the average FPS falls from 84 at 1080p to 54.3 at 1440p and then to 32.3 at 4K. At Low settings, the decline is from 144.7 to 95.1 to 59.1. The largest absolute drop occurs between 1080p and 1440p, suggesting the GPU’s pixel throughput becomes a bottleneck as resolution increases. At 4K, even Low settings only reach 59.1 FPS, which is below the 60 FPS threshold commonly associated with smooth gameplay. The gap between High and Ultra is small at every resolution: at 1080p, High delivers 84 FPS and Ultra 76.9; at 1440p, 54.3 versus 52.6; at 4K, 32.3 versus 31.5. This indicates that Ultra offers diminishing returns over High, and the GPU is already near its limits at High settings.

CPU Role

The Ryzen 7 5700X3D is a desktop processor with 8 cores and 16 threads, base clock of 3.00 GHz, boost clock of 4.10 GHz, and 96 MB of shared L3 cache. Its benchmark scores include a Cinebench R23 multi-core result of 22366 and a single-core result of 3157, along with a Geekbench multi-core score of 10108 and single-core score of 1922. The CPU ranks in the 82nd percentile of all tested processors, and its nearest rivals are within 0.6% in average benchmark score. In Thief, the CPU’s strong single-thread performance is evident at 1080p Low, where the frame rate reaches 144.7 FPS, indicating the CPU can feed the GPU without becoming a bottleneck. The 8-core/16-thread configuration is more than sufficient for a 2014 stealth game, which typically uses fewer threads. The large 96 MB L3 cache likely helps with game data access, though the exact impact is not directly measured. At 1080p, the difference between Low and Ultra is 144.7 versus 76.9 FPS, a substantial gap that reflects the GPU’s scaling with settings rather than CPU limitations.

Settings Recommendations

Based on the measured FPS rows, the optimal settings depend on the target resolution. At 1080p, Medium delivers 107.3 FPS, which is a strong balance between visual quality and performance. Low provides 144.7 FPS for maximum frame rate, while High and Ultra sit at 84 and 76.9 FPS respectively. For 1440p, Low is the only setting that stays above 90 FPS, with 95.1 FPS; Medium follows at 72.3 FPS, while High and Ultra drop to 54.3 and 52.6 FPS. At 4K, only Low reaches a playable level at 59.1 FPS; Medium, High, and Ultra fall to 42.3, 32.3, and 31.5 FPS. The data suggests that for 1080p, Medium is the recommended preset for a smooth experience, while Low is available for higher refresh rates. For 1440p, Low or Medium are the only settings that maintain frame rates above 70. At 4K, Low is the only viable option, and even then the average FPS is just below 60.

How This Combo Ranks

The combo ranks 1371 out of 1642 tested configurations in Thief, placing it in the lower tier of the database. This means 1370 other combos deliver higher performance. The CPU’s percentile is 82, while the GPU’s percentile is 58, indicating a high-end processor paired with a mid-range graphics card. The overall rank is likely dragged down by the GPU, which becomes the limiting factor at higher resolutions. The GPU’s nearest rivals are within 1.8% in average benchmark score, but the combo’s in-game rank is determined by actual measured FPS, which shows the GPU struggling at 4K. The CPU’s strong benchmark scores do not translate into a high combo rank because Thief’s performance is heavily GPU-bound at the resolutions tested.

GPU Role

The NVIDIA GeForce RTX 2060 has 6 GB of GDDR6 VRAM on a 192-bit bus, with a memory bandwidth of 336.0 GB/s. Its base clock is 1365 MHz and boost clock is 1680 MHz, with memory running at 14 Gbps effective. The GPU contains 1920 shading units, 120 texture mapping units, and 48 render output units. Its Passmark G3D score is 14111, and it ranks in the 58th percentile of all GPUs. In Thief, the 6 GB VRAM is sufficient for the game’s textures at 1080p and 1440p, as the game is from 2014 and likely uses less than 6 GB. The frame rate drops at 4K indicate that the GPU’s compute and memory bandwidth are the limiting factors. The small difference between High and Ultra at each resolution suggests the GPU is already near its limits at High settings. The 336 GB/s bandwidth is adequate for 1080p and 1440p, but at 4K the pixel fill rate and shader throughput become bottlenecks, as evidenced by the 32.3 FPS at 4K High.

Measured FPS Breakdown

| Resolution | Settings | Avg FPS |

|------------|----------|---------|

| 3840x2160 | High | 32.3 |

| 3840x2160 | Low | 59.1 |

| 3840x2160 | Medium | 42.3 |

| 3840x2160 | Ultra | 31.5 |

| 2560x1440 | High | 54.3 |

| 2560x1440 | Low | 95.1 |

| 2560x1440 | Medium | 72.3 |

| 2560x1440 | Ultra | 52.6 |

| 1920x1080 | High | 84 |

| 1920x1080 | Low | 144.7 |

| 1920x1080 | Medium | 107.3 |

| 1920x1080 | Ultra | 76.9 |

FAQ

Q: What is the average FPS at 1080p Ultra?

A: 76.9 FPS.

Q: How much L3 cache does the CPU have?

A: 96 MB shared.

Q: What is the GPU’s memory bandwidth?

A: 336.0 GB/s.

Q: What is the combo’s rank in Thief?

A: 1371 out of 1642 tested combos.

Q: What is the CPU’s boost clock?

A: 4.10 GHz.

Q: What is the GPU’s VRAM size?

A: 6 GB.