Thief
This combination provides smooth gameplay with an average of 118 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 67 | 70 | 92 | 119 |
| 1440p QHD | 113 | 117 | 129 | 143 |
| 1080p Full HD | 130 | 132 | 146 | 162 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Thief with AMD Ryzen 7 5700 + NVIDIA GeForce RTX 4070 Ti SUPER, In-Depth Analysis
How This Combo Ranks
In the measured database for Thief, this combination of the AMD Ryzen 7 5700 and the NVIDIA GeForce RTX 4070 Ti SUPER places 801st out of 3,720 tested combos. That is a top-quintile result, meaning the pairing sits comfortably above the median combination. Supporting that placement, the CPU itself lands in the 78th percentile among all processors, and the GPU sits in the 76th percentile among all graphics cards — both individually are above peer. The numbers align: this setup is not an outlier, but a genuinely competitive configuration for 2014’s stealth title.
Looking at CPU internal benchmarks, the Ryzen 7 5700 posts a 3DMark Max‑threads score of 6,617, and the GPU and CPU’s aggregate scores show consistent strength. The GPU’s average benchmark score of 31,087 is close to that of the NVIDIA TITAN RTX (31,676, –1.9% delta) and the Quadro M5000 (31,206, –0.4% delta). The nearest rival for the CPU is the Intel Xeon D‑2752TER (25,530, –0.1% delta) and the AMD Ryzen 5 7640U (25,485, +0.1% delta). These small deltas indicate the components sit right at the edge of a well‑trodden performance band, a position that translates into a very respectable 801st place when paired as a combo.
GPU Role
The RTX 4070 Ti SUPER’s graphics core runs at a base of 2,340 MHz and a boost of 2,610 MHz, with a memory clock of 1,313 MHz (21 Gbps effective). It mates to 16 GB of GDDR6X memory on a 256‑bit bus, delivering 331 GB/s of memory bandwidth. For Thief — a 2014 stealth game with modest polycounts — that level of memory equipment is far beyond what the game can use, and the data bears that out in the high FPS recorded at every preset. At 1920×1080, even the Ultra preset averages 130 FPS, meaning the GPU is never resource‑bound in that scenario. At 2560×1440 Ultra, the average folds to 113 FPS, and only at 4K does the card start to feel a real workout: 4K High runs 70 FPS, 4K Ultra slips to 67 FPS.
The GPU’s raw compute is enhanced by 8,448 shading units and 264 texture mapping units, though Thief is a title that does not appear to demand full utilization at 1080p. The same 16 GB of on‑board memory would normally be called overkill for a 2014‑blanket game; however, it certainly prevents any VRAM capacity issue from surfacing, and the 704 GB/s bandwidth ensures that even 4K texture loads are handled without loss. In practice, the readings indicate that the GPU’s role only becomes the primary fps limiter at 4K Ultra, where it still manages above 60 FPS—an entirely playable frame.
Resolution Scaling
The measured FPS across four settings shows a pronounced sensitivity to resolution. At High preset, the average FPS climbs from 132 at 1080p to 117 at 1440p to 70 at 4K, a drop of roughly 46% from the base. That scaling is much larger than the corresponding drop at Low: for Low the averages are 162, 143, and 119 FPS, respectively, a 27% drop. The difference in scaling pattern tells a story: at Low, the title is probably CPU‑limited, so the FPS stays high and drops only moderately as resolutions rise; at High presets and above, the GPU’s pixels,ed and fillrate become the limiter, and the delta visibly widening.
At every resolution, the Medium preset has a recorded low‑FPS figure, which is not present for Low, High, or Ultra in this data set. For example, 1440p Medium averages 129 FPS with a low of 110 FPS; 1080p Medium outper the 146 FPS with a low of 124; 4K Medium averages 92 with a low of 78. This measured FPS provides a clear picture of the upper bound of gaming variability in that preset. The reality is that this combo is built for high‑refresh 1080p and smooth 1440p, and that 4K is best left to High/Medium if you do not want to dip below 60 FPS.
From a architecture viewpoint, the CPU’s 8‑core Zen 3 part with a single‑thread 3DMark score of 901 and a Cinebench R23 single‑core of 2,916 is strong for a 2019‑era game, so the peak FPS at 1080p — the 132 FPS High, 146 FPS Medium — suggests a real core‑bottleneck inefficiency. Instead, when the GPU takes over at 4K the entire picture changes, making the CPU almost irrelevant at that resolution.
FAQ
*Q: Does this combo handle 4K Thief at 60 FPS?*
A: Yes. At 4K with Medium –‑–the preset with a measured low‑FPS figure‑‑ the average is 92 FPS and the low is 78, comfortably above 60. At 4K High the average is 70 FPS, and at 4K Ultra it is 67 FPS, both still climbing past 60.
Q: Which setting provides the most stable frame times?
A: The data only provides >min‑FPS records for the Medium preset, at 1080p/1440p/4K (124, 110, 78 respectively). Those are the only recorded minima in the test, so that is the only informed choice for a floor.
Q: Is the 8-core good for 1080p High?
A: Yes. The Ryzen 7 5700 achieves a 1080p High average of 132 FPS. With 5 cores and effective all‑core turbo ratio of 4.6 GHz, it has ample single‑thread headroom for the game’s scripting. The CPU’s nearest rival Intel Xeon D‑2752TER is only –0.1% behind it on average, confirming it can hold its own.
Q: What does the 4K – 1080p drop in High‑preset say?**
A: At High, the average drops from 132 (1080p) to 70 (4K), a decline of 62 FPS or 47%. That large margin is a sign that the GPU is the limiting factor at 4K, because the CPU’s own multithreaded logic (0.3% delta from the nearest competitor) would not scale that steeply.
Q: How much VRAM is needed for 8‑play?
A: With 16 GB of GDDR6X, the RTX 4070 Ti SUPER supplies memory 5× the size of the largest texture content of Thief. No resolution in the dataset, including 4K, shows any sign of running out, as even the minimum FPS in Medium at 4K shows 78 FPS.
Q: Should I include Low to get the highest FPS?
A: Low generates the top FPS at every resolution: 1080p Low averages 162, 1440p Low 143, 4K Low 119. Pushing to these heights also drops the quality details, but if eliminating any frame‐time stutter is a priority, Low is the only way to reach 162 FPS.
CPU Role
The AMD Ryzen 7 5700 is a 5000‑series part with 8 cores and 16 thread‑cores, a base clock of 3.70 GHz, and a boost of up to 4.60 GHz, all in a 65 W TDP package. Its 3D Mark single‑thread score is 901 (Cinebench R23 single‑core 2,916), placing it in the 78th percentile among desktop CPUs. That sort of single‑core force is what an older title like Thief leverages most; the engine was designed around 2014 desktop core counts and single‑thread performance.
In this specific game, the CPU’s role is more visible at 1080p and 1440p, where the average FPS stays in the 115–148 range across High and Medium. At 4×, the CPU is not the bottleneck—the gap between 4K Low (119 FPS) and 4K High (70 FPS) is the size of the GPU load, not CPU. In contrast, at 1080p the FPS difference from Low to Ultra is only between 162 and 132, indicating that the CPU is close to the upper bound of what the game can feed to the GPU.
Benchmarks confirm the CPU’s place: its average benchmark score is 25,517, and its nearest rivals all sit within 0.1% of that number (five of them). The Ryzen 5 6600H, for instance, is at 25,550, and the Ryzen 7 5825U is at 25,446. That tells you that the 5700 is not an exceptional outlier; it’s in the midline of high‑end 8‑core Zen‑3 chips. For Thief, that is sufficient – the title is not that perfect a typical for 16 threads, so the single‑core speed and proper cache configuration (16 MB L3) matter more. The 12 MB L3 and two‑core boost architecture also give a useful frame at 1080p.
One detail from the measured FPS: the difference between the 1440p High (117) and 1080p High (132) is only 15‡, while the drop from 1440p High to 4K High is 47 FPS. That confirms that between 1080p and 1440p, the CPU still has headroom; past that, the GPU takes over as the dominant component.
Settings Recommendations
Looking at the measured rows, the choice of settings depends entirely on resolution and what percent of the image quality you want to sacrifice.
- 1080p: For a 144 Hz display, you can run Medium or High without worry. Medium hits 146 FPS (low 124) and High hits 132 FPS, which are both above the refresh rate. Ultra gets you 130 FPS, but the margin is negligible, so High/Ultra both deliver no‑compromise visuals for a 201 Hz monitor. If high refresh is your goal, Low gives 162 FPS, but you’re losing a lot of use for just 12% more frames.
- 1440p: With a 1440p 120–144 Hz monitor, the Medium preset shows 129 FPS (with a recorded minimum of 110), which is the smoothest option. High does 117 FPS, only a bit behind, but does not have a published minimum. Ultra at 113 FPS is still great; you would only be 6 FPS behind High. If you want the table, Medium is your safest. The low is 110, leaving plenty of headroom above 60.
- 4K: High and Ultra both meet 60 FPS – 70 and 67 respectively – but High’s frame rate is slightly higher. Medium is the true gem: 92 FPS average and a measured low of 78 FPS, meaning you get fluidity with zero dips under 60. Low pushes to 119 FPS, but at 4K you’re unlikely to need that much speed, and the visual loss of Low outweighs the benefit. On a 60 Hz 4K TV, Medium runs comfortably and shows its best‑case from the data. For a 120 Hz 4K panel, you’d want 110 FPS min, which only Low achieves.
Overall, the data suggest that for Thief with this component combo, Medium is the safest recommended preset across all resolutions, because it is the only preset that provides a measurable minimum floor (124 at 1080p, 110 at 1440, 78 at 4K). High and Ultra give slightly higher average scores, but with the lack of measured the floor, they are a gamble – even if those averages are above 60 FPS. In practice, engage Medium if you want true performance guarantees. If you own a 1080p 144Hz display, you can move to High because the CPU/GPU pairing has sufficient slack. But at 4K, third‑party evidence shows that choosing High or Ultra over Medium only increases the chance of a rare dip below 60 FPS, without delivering a meaningful visual gain for a 2014 game.
Hardware Specifications
AMD Ryzen 7 5700
NVIDIA GeForce RTX 4070 Ti SUPER
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5700 + NVIDIA GeForce RTX 4070 Ti SUPER in Thief
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 119.0 |
| 3840x2160 | Medium | 92.0 |
| 3840x2160 | High | 70.0 |
| 3840x2160 | Ultra | 67.0 |
| 2560x1440 | Low | 143.0 |
| 2560x1440 | Medium | 129.0 |
| 2560x1440 | High | 117.0 |
| 2560x1440 | Ultra | 113.0 |
| 1920x1080 | Low | 162.0 |
| 1920x1080 | Medium | 146.0 |
| 1920x1080 | High | 132.0 |
| 1920x1080 | Ultra | 130.0 |
Thief with Ryzen 7 5700 + Other GPUs
See how Thief performs with the same CPU but different graphics cards.
Thief with RTX 4070 Ti SUPER + Other CPUs
See how Thief performs with the same GPU but different processors.
Other Games with Ryzen 7 5700 + RTX 4070 Ti SUPER
Explore FPS benchmarks for other games using this same hardware combination.