Thief

Thief

AVERAGE FPS
113
good

This combination provides smooth gameplay with an average of 113 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 59 61 78 103
1440p QHD 96 99 130 147
1080p Full HD 134 134 148 165

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 103
3840x2160 Medium 78
3840x2160 High 61
3840x2160 Ultra 59
2560x1440 Low 147
2560x1440 Medium 130
2560x1440 High 99
2560x1440 Ultra 96
1920x1080 Low 165
1920x1080 Medium 148
1920x1080 High 134
1920x1080 Ultra 134

Thief with AMD Ryzen 5 5600X + AMD Radeon RX 9070 XT, In-Depth Analysis

# How This Combo Ranks

The AMD Ryzen 5 5600X paired with the AMD Radeon RX 9070 XT holds combo rank 458 out of 1,642 tested combinations in Thief. That places this pairing in the top 28% of all combos tested, which is a strong showing for a mid-generation CPU matched with a current-generation GPU. The rank reflects the balance between the two components—neither is dramatically holding the other back, and the system delivers playable frame rates across all tested settings and resolutions.

Looking at the measured data, this combo's weakest moment comes at 4K Ultra where it averages 58.9 FPS, while its strongest showing is at 1080p Low with 164.5 FPS. The spread between those extremes is substantial, but the pattern across resolutions shows that the GPU is doing most of the heavy lifting in this pairing. The CPU's benchmark percentiles support this interpretation, with the 5600X sitting at the 78th percentile among all CPUs, while the RX 9070 XT lands at the 82nd percentile among all GPUs—a slight edge to the graphics card in relative standing.

GPU Role

The Radeon RX 9070 XT brings 16 GB of GDDR6 memory on a 256-bit bus, with memory clocked at 2518 MHz (20.1 Gbps effective) and a total bandwidth of 644.6 GB/s. The GPU's boost clock reaches 2970 MHz, with a game clock of 2400 MHz and a base clock of 1660 MHz. These specifications translate directly into Thief's performance, particularly at higher resolutions where memory bandwidth and capacity become more critical.

The data shows the GPU's influence clearly: at 4K, the difference between Low and Ultra settings is 43.7 FPS (from 102.6 down to 58.9). That's a 43% drop in performance when maxing out settings, which indicates the GPU is the primary constraint at 4K. The GPU also shows strong scaling from 1080p to 1440p—at High settings, frame rates drop from 134.2 to 99.3, a 26% reduction, and then further to 60.7 at 4K, another 39% drop from 1440p.

The GPU's pixel rate of 380.2 GPixel/s and texture rate of 760.3 GTexel/s are substantial, and these help explain why the card handles Thief's environments well at lower settings. At 1080p Low, the combo achieves 164.5 FPS, which suggests the GPU has ample headroom when pixel and texture workloads are reduced. The RDNA 4.0 architecture with 4,096 shading units and 128 ROPs provides the compute foundation for these results, and the 82nd percentile ranking among all GPUs confirms this is a high-end part in the broader landscape.

CPU Role

The Ryzen 5 5600X is a 6-core, 12-thread processor based on Zen 3 architecture, with a base clock of 3.70 GHz and a boost clock of 4.60 GHz. It features 32 MB of L3 cache and supports DDR4 memory with dual-channel configuration and 51.2 GB/s memory bandwidth. The CPU's benchmark results show strong single-thread performance—a 3DMark single-thread score of 917 and a Cinebench R23 single-core score of 2,622—which matters for Thief's gameplay logic and AI.

In Thief, the CPU's role becomes evident when comparing frame rates at lower resolutions. At 1080p, the difference between Low (164.5 FPS) and Ultra (133.9 FPS) is 30.6 FPS, but the more telling comparison is how the CPU holds up at higher resolutions. At 1440p Low, the combo hits 147.3 FPS, and at 4K Low it reaches 102.6 FPS. The fact that 4K Low still produces over 100 FPS indicates the CPU is not a bottleneck even at lower graphics settings, where the GPU has less work to do.

The CPU's multi-threaded capabilities are also relevant. Its Cinebench R23 multi-core score of 18,578 and PassMark multithread score of 21,858 show it can handle background tasks and game logic simultaneously without dragging down frame rates. The 5600X sits just 0.3% below the Ryzen 5 5600GT and Intel Core i7-10700 in average benchmark scores, and 0.5% below the Core i5-12490F, while trailing the Xeon 6325P by 0.7%—all rival CPUs that would perform nearly identically in this game.

FAQ

Q: Can this combo maintain 60 FPS at 4K Ultra in Thief?

A: No, the measured average at 4K Ultra is 58.9 FPS, which falls just short of 60 FPS. Dropping to High settings at 4K brings the average to 60.7 FPS, barely crossing the threshold.

Q: What is the best resolution for high refresh rate play with this combo?

A: At 1080p, the combo delivers between 133.9 FPS (Ultra) and 164.5 FPS (Low), making it suitable for 144Hz displays. At 1440p, frame rates range from 95.9 FPS (Ultra) to 147.3 FPS (Low), which still supports 120Hz+ monitors at lower settings.

Q: How does the CPU compare to its closest rivals in benchmark scores?

A: The Ryzen 5 5600X has an average benchmark score of 20,680. It trails the Ryzen 5 5600GT by 0.3%, the Core i7-10700 by 0.3%, and the Core i5-12490F by 0.5%, while leading the Xeon 6325P by 0.7%.

Q: Is 16 GB of VRAM sufficient for Thief at 4K?

A: The data shows the combo achieves 60.7 FPS at 4K High and 102.6 FPS at 4K Low with 16 GB of VRAM, indicating the memory capacity is not a limiting factor in this game at any tested setting.

Q: Which component is more likely to limit performance in this game?

A: The GPU is the primary limiter at higher resolutions—the 43.7 FPS difference between 4K Low and 4K Ultra demonstrates GPU-bound scaling. At 1080p, the CPU's influence is more visible, but the 30.6 FPS gap between Low and Ultra still points to GPU limitation.

Q: What is the CPU's percentile ranking among all processors?

A: The Ryzen 5 5600X ranks at the 78th percentile among all CPUs, while the RX 9070 XT ranks at the 82nd percentile among all GPUs, making the GPU the slightly stronger component in this pairing.

Resolution Scaling

The frame rate progression from 1080p to 4K reveals how the workload shifts between components. At High settings, the combo delivers 134.2 FPS at 1080p, 99.3 FPS at 1440p, and 60.7 FPS at 4K. That's a 26% drop from 1080p to 1440p, followed by a 39% drop from 1440p to 4K. The larger drop at higher resolution indicates the GPU becomes increasingly dominant as pixel count rises.

At Low settings, the scaling is less severe in absolute terms but still shows GPU limitation: 164.5 FPS at 1080p, 147.3 FPS at 1440p, and 102.6 FPS at 4K. The 1080p-to-1440p drop here is only 10.5%, suggesting the CPU can still feed frames adequately at lower settings, but the 4K drop of 30.4% shows the GPU struggling with the increased pixel load.

The Medium settings curve sits between these extremes: 147.9 FPS at 1080p, 130.1 FPS at 1440p, and 77.6 FPS at 4K. The 4K Medium result represents a 40.3% drop from 1440p Medium, the steepest relative decline across all settings presets. This pattern confirms that at 4K, the GPU is the limiting component—the CPU's 6 cores and 12 threads are sufficient to keep up, but the RX 9070 XT's rendering throughput diminishes as resolution climbs.

Settings Recommendations

For the best balance of visual quality and frame rate, High settings at 1440p offer the strongest combination in the measured data. At 99.3 FPS, this configuration provides smooth gameplay with substantial visual fidelity over Medium (130.1 FPS) while still maintaining a comfortable margin above 60 FPS. The step from High to Ultra at 1440p costs only 3.4 FPS (from 99.3 to 95.9), so Ultra is also viable if visual quality takes priority.

At 4K, the choice is more constrained. Ultra averages 58.9 FPS, which is technically playable but sits below the 60 FPS threshold. High at 4K reaches 60.7 FPS, making it the minimum recommended settings for a stable 60 FPS experience. Medium at 4K (77.6 FPS) provides a comfortable buffer and is the best choice for players who want higher frame rates without dropping to Low (102.6 FPS).

At 1080p, all settings presets deliver above 130 FPS, so the recommendation is straightforward: use Ultra (133.9 FPS) for the best visuals, or drop to High (134.2 FPS) for a negligible difference in performance with slightly reduced settings. The 1080p Low preset (164.5 FPS) is only relevant for competitive play or extremely high refresh rate displays, as the visual quality loss is significant for only a 22.8% frame rate gain over Ultra.

Hardware Specifications

AMD Ryzen 5 5600X

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 4600 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

AMD Radeon RX 9070 XT

VRAM 16 GB GDDR6
Base Clock —
Boost Clock 2970 MHz MHz
TDP 304 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5600X + AMD Radeon RX 9070 XT in Thief

Resolution Settings Avg FPS
3840x2160 Low 102.6
3840x2160 Medium 77.6
3840x2160 High 60.7
3840x2160 Ultra 58.9
2560x1440 Low 147.3
2560x1440 Medium 130.1
2560x1440 High 99.3
2560x1440 Ultra 95.9
1920x1080 Low 164.5
1920x1080 Medium 147.9
1920x1080 High 134.2
1920x1080 Ultra 133.9

Thief with Ryzen 5 5600X + Other GPUs

See how Thief performs with the same CPU but different graphics cards.

Thief with RX 9070 XT + Other CPUs

See how Thief performs with the same GPU but different processors.

Other Games with Ryzen 5 5600X + RX 9070 XT

Explore FPS benchmarks for other games using this same hardware combination.