The Technomancer

The Technomancer

AVERAGE FPS
71
good

This combination provides smooth gameplay with an average of 71 FPS, suitable for most gaming scenarios.

Estimated performance. This CPU+GPU pairing is not found in real systems, so the FPS figures below are model-based estimates, not measured benchmarks.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 27 34 40 52
1440p QHD 48 62 73 95
1080p Full HD 74 95 111 145

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 52
3840x2160 Medium 40
3840x2160 High 34
3840x2160 Ultra 27
2560x1440 Low 95
2560x1440 Medium 73
2560x1440 High 62
2560x1440 Ultra 48
1920x1080 Low 145
1920x1080 Medium 111
1920x1080 High 95
1920x1080 Ultra 74

The Technomancer with Intel Core Ultra 9 185H + AMD Radeon RX 7800M, In-Depth Analysis

The Technomancer, a 2016 Action RPG, presents a demanding workload that scales significantly with resolution. Testing the Intel Core Ultra 9 185H paired with the AMD Radeon RX 7800M reveals a configuration that is clearly capable of smooth gameplay at lower resolutions but begins to strain under the load of 4K. The measured frame rates indicate a system where the GPU becomes the primary bottleneck as pixel count increases, while the CPU’s high core count ensures consistent performance at lower settings.

Resolution Scaling

The data shows a steep and predictable drop in performance as resolution increases from 1920x1080 to 3840x2160. At the "High" preset, the average frame rate falls from 95 FPS at 1080p to 62 FPS at 1440p, and then plummets to 34 FPS at 4K. This represents a 35% decrease from 1080p to 1440p and a further 45% decrease from 1440p to 4K. The scaling pattern strongly suggests that the AMD Radeon RX 7800M is the limiting component at higher resolutions, as the workload shifts from the CPU to the GPU's rendering capabilities.

The transition from 1440p to 4K is particularly punishing, with frame rates nearly halving across all settings. For instance, at "Medium" settings, the average FPS drops from 73 at 2560x1440 to 40 at 3840x2160, a reduction of 33 FPS. This indicates that the 12 GB of GDDR6 memory and the GPU's compute units are being saturated by the increased pixel count. The data implies that for a consistent experience, users should target 1440p as the practical ceiling for this combination, as 4K performance dips below the 60 FPS threshold even on lower presets.

The scaling from "Low" to "Ultra" settings also reveals the GPU's headroom. At 1080p, the difference between "Low" (145 FPS) and "Ultra" (74 FPS) is a substantial 71 FPS, showing that the GPU is capable of high frame rates but is heavily taxed by advanced graphical features. This gap narrows at higher resolutions, where the GPU is already overburdened; at 4K, the difference between "Low" (52 FPS) and "Ultra" (27 FPS) is only 25 FPS. This compression of performance at 4K confirms that the GPU’s raw throughput is the primary constraint, not the CPU.

GPU Role

The AMD Radeon RX 7800M, based on the RDNA 3.0 architecture with the Navi 32 chip, is the central figure in these benchmark results. Its 12 GB of GDDR6 memory on a 192-bit bus provides a bandwidth of 432.0 GB/s, which is crucial for texture loading and high-resolution rendering. The GPU’s boost clock of 2335 MHz and game clock of 2145 MHz allow for substantial processing power, yet the data shows that this is not enough to maintain high frame rates at 4K Ultra settings, where the average drops to 27 FPS.

The GPU's performance percentile vs all GPUs is 73, placing it in the upper quartile of tested hardware. Its average benchmark score of 27883 is nearly identical to its nearest rival, the AMD Radeon Pro Vega 20, which has a score of 27839 and a deltaPct of 0.2. This indicates that the RX 7800M is a solid mid-to-high-range performer, but it is not a top-tier solution for extreme resolutions. The 35.87 TFLOPS of FP32 performance is significant, yet the 4K results suggest that memory bandwidth and pixel fill rate are the limiting factors.

The measured FPS data shows that the GPU scales well with settings at lower resolutions. For example, at 1080p, the "Low" preset yields 145 FPS, while "High" yields 95 FPS, demonstrating that the GPU can handle a wide range of graphical loads. However, at 4K, even the "Low" preset only achieves 52 FPS, which is below the 60 FPS target for smooth gameplay. This suggests that the RX 7800M is best suited for 1080p and 1440p gaming, where it can deliver high refresh rates, rather than 4K, where it struggles to maintain playable performance on demanding titles.

CPU Role

The Intel Core Ultra 9 185H, with its 16 cores and 22 threads, provides a robust foundation for gaming. Its boost clock of 5.10 GHz ensures that single-threaded performance is strong, which is often critical for game logic and physics. The CPU’s benchmark scores are impressive, with a Cinebench R23 multi-core score of 17984.5 and a single-core score of 1810.5, placing it in the 85th percentile vs all CPUs. This high processing power ensures that the CPU is not a bottleneck in The Technomancer, even at lower resolutions where frame rates are high.

The CPU's nearest rivals, such as the AMD Ryzen AI 7 PRO 350 and Intel Core 7 250H, have nearly identical average scores, with deltaPct values of -0.1 and -0.2 respectively. This indicates that the Core Ultra 9 185H is at the top of its class, but its performance advantage is marginal. In the context of this game, the CPU's role is to feed the GPU with data, and the data shows that it does so efficiently. At 1080p with "Low" settings, the system achieves 145 FPS, which is likely CPU-bound, but the frame rate remains high, indicating no significant processing stall.

The CPU's 24 MB of shared L3 cache and 89.6 GB/s of memory bandwidth are adequate for this game's requirements. The data does not show any signs of CPU limitation, as the frame rate scaling is consistent with GPU load. For instance, at 1440p "Medium," the system hits 73 FPS, which is a reasonable drop from the 1080p "Low" score. This smooth scaling indicates that the CPU is capable of keeping up with the GPU's demands, and any performance drops are directly attributable to the graphics card's rendering capabilities.

How This Combo Ranks

In the specific benchmark for The Technomancer, this combination of the Intel Core Ultra 9 185H and AMD Radeon RX 7800M ranks 1879 out of 2825 tested combos. This places it in the lower half of all configurations, which is surprising given the individual component scores. The combo’s rank suggests that while the CPU and GPU are each powerful in isolation, their pairing does not yield top-tier results for this particular title. This could be due to the game’s engine characteristics or driver optimizations that favor other hardware combinations.

The rank of 1879 out of 2825 means that roughly 946 other combos perform better in this game. This is a notable finding, as the GPU's percentile rank of 73 and CPU's rank of 85 would suggest a higher combined placement. The data implies that The Technomancer may be particularly sensitive to certain hardware configurations, and this specific pairing is not optimal for it. The measured FPS data shows that while the system can achieve high frame rates at 1080p, it falls behind at 4K, which may be dragging down its overall rank.

Compared to other tested combos, this system’s performance is adequate but not exceptional. The high CPU and GPU scores do not translate into a top-tier gaming experience for this title, indicating that the game’s optimization plays a significant role. The combo’s rank suggests that users should not expect flagship-level performance in The Technomancer, despite the hardware’s capabilities in other benchmarks. The data indicates that a different CPU-GPU pairing might yield better results for this specific game.

Measured FPS Breakdown

The measured FPS data provides a detailed look at performance across three resolutions and four settings levels. At 1920x1080, the system performs admirably, with the "Low" preset achieving an average of 145 FPS, "Medium" at 111 FPS, "High" at 95 FPS, and "Ultra" at 74 FPS. The "Medium" preset also recorded a minimum of 95 FPS and a maximum of 128 FPS, showing good stability. These numbers indicate that 1080p is the sweet spot for this combo, allowing for high refresh rate monitors.

Moving to 2560x1440, the frame rates drop accordingly. The "Low" preset averages 95 FPS, "Medium" averages 73 FPS (with a min of 62 and max of 84), "High" averages 62 FPS, and "Ultra" averages 48 FPS. This resolution still provides playable frame rates, especially on "High" settings, which is close to the 60 FPS target. The "Ultra" preset at 48 FPS may be borderline for some users, but it is not unplayable.

At 3840x2160, the system struggles. The "Low" preset averages 52 FPS, "Medium" averages 40 FPS (with a min of 34 and max of 46), "High" averages 34 FPS, and "Ultra" averages 27 FPS. None of these presets reach the 60 FPS threshold, and even the "Low" setting falls below it. The 4K results clearly show that this GPU is not suited for high-fidelity gaming at this resolution, as the pixel count overwhelms its capabilities. The data suggests that users should avoid 4K for a smooth experience in The Technomancer.

FAQ

Q: What is the best resolution for this combo?

A: Based on the measured FPS, 1920x1080 is the optimal resolution, with all presets exceeding 74 FPS. At 2560x1440, the "High" preset achieves 62 FPS, which is also viable, but 4K is not recommended as all presets fall below 60 FPS.

Q: How does the "Medium" preset perform at 1440p?

A: At 2560x1440 with "Medium" settings, the system averages 73 FPS, with a minimum of 62 FPS and a maximum of 84 FPS. This provides a smooth experience with good visual quality.

Q: Is the CPU or GPU the bottleneck at 4K?

A: The data indicates the GPU is the limiting factor at 4K. The frame rate drops significantly from 1440p to 4K, and the CPU’s high core count and clock speeds are sufficient to feed the GPU without causing a bottleneck.

Q: What is the performance difference between "Low" and "Ultra" at 1080p?

A: At 1920x1080, the "Low" preset averages 145 FPS, while the "Ultra" preset averages 74 FPS. This is a difference of 71 FPS, showing that the GPU has significant headroom at this resolution for higher settings.

Q: How does the GPU rank compared to its rivals?

A: The AMD Radeon RX 7800M has an average benchmark score of 27883, which is within 0.5% of its nearest rivals, the AMD Radeon Pro W5500X and NVIDIA GeForce GTX 980 Ti. Its performance is competitive but not significantly ahead.

Q: Can the system handle 4K at any setting?

A: The highest average FPS at 3840x2160 is 52 FPS on the "Low" preset. While this is technically playable, it falls below the 60 FPS target and may result in a less smooth experience. Higher presets at 4K are not recommended.

Settings Recommendations

For the best balance of visual fidelity and performance, the "High" preset at 2560x1440 is the recommended configuration. This setting yields an average of 62 FPS, which is just above the 60 FPS threshold for smooth gameplay, and provides a significant visual upgrade over "Medium" settings. The data shows that this is the highest quality setting that maintains playable frame rates without compromising on resolution.

If a higher frame rate is preferred, the "Medium" preset at 2560x1440 is an excellent choice, delivering 73 FPS with a minimum of 62 FPS. This ensures a stable experience with no noticeable drops. For users with 1080p displays, the "Ultra" preset at 74 FPS is the best option, as it provides the maximum visual quality while still maintaining a high frame rate.

The 4K resolution should be avoided for this game, as even the "Low" preset at 52 FPS is not ideal. The performance drop at this resolution is too severe, and the visual benefits do not outweigh the loss in smoothness. Therefore, the recommended experience is to use "High" or "Medium" settings at 1440p, or "Ultra" at 1080p, to get the most out of this hardware combination in The Technomancer.

Hardware Specifications

Intel Core Ultra 9 185H

Cores / Threads 16 / 22
Base Clock 3900 MHz
Boost Clock 5100 MHz
TDP 45W
Socket Intel BGA 2049
View Full CPU Details →

AMD Radeon RX 7800M

VRAM 12 GB GDDR6
Base Clock —
Boost Clock 2335 MHz MHz
TDP 180 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 9 185H + AMD Radeon RX 7800M in The Technomancer

Resolution Settings Avg FPS
3840x2160 Low 52.0
3840x2160 Medium 40.0
3840x2160 High 34.0
3840x2160 Ultra 27.0
2560x1440 Low 95.0
2560x1440 Medium 73.0
2560x1440 High 62.0
2560x1440 Ultra 48.0
1920x1080 Low 145.0
1920x1080 Medium 111.0
1920x1080 High 95.0
1920x1080 Ultra 74.0

The Technomancer with iUltra 9 185H + Other GPUs

See how The Technomancer performs with the same CPU but different graphics cards.

The Technomancer with RX 7800M + Other CPUs

See how The Technomancer performs with the same GPU but different processors.

Other Games with iUltra 9 185H + RX 7800M

Explore FPS benchmarks for other games using this same hardware combination.