The Technomancer
This combination offers playable performance with an average of 55 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 20 | 28 | 31 | 38 |
| 1440p QHD | 36 | 49 | 55 | 70 |
| 1080p Full HD | 58 | 73 | 84 | 112 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
The Technomancer with Intel Core i7-14700K + NVIDIA GeForce GTX 1660 Ti, In-Depth Analysis
The Technomancer, a 2016 Action RPG, presents a demanding workload that clearly separates the capabilities of the Intel Core i7-14700K and NVIDIA GeForce GTX 1660 Ti combination. The measured frame rates reveal a system where the graphics card is the primary bottleneck across most settings, while the high-end processor ensures that CPU limitations are rarely a factor. This analysis examines the performance data to show how this pairing scales with resolution and graphical fidelity.
Resolution Scaling
The transition from 1920x1080 to 3840x2160 has a profound impact on frame rates, indicating a system heavily constrained by the GPU. At High settings, the average frame rate drops from 72.8 FPS at 1080p to 48.5 FPS at 1440p, a significant reduction that accelerates further to just 28.4 FPS at 4K. This scaling pattern shows that each step up in resolution roughly halves the performance headroom, with the 4K figure representing less than 40% of the 1080p performance.
The data suggests that at 1080p, the workload is not purely GPU-bound, as the performance delta between Low and Ultra settings is substantial. However, as resolution increases, the gap between settings narrows in absolute terms. At 4K, the difference between Low (38 FPS) and Ultra (20.4 FPS) is 17.6 FPS, whereas at 1080p, the same settings span 112.3 FPS to 58.2 FPS, a 54.1 FPS difference. This compression of performance at higher resolutions confirms that the GTX 1660 Ti's rendering throughput is the limiting factor, as the pixel fill rate and memory bandwidth become saturated.
The most telling observation is the performance cliff at 4K Ultra, which yields only 20.4 FPS. This is less than half the frame rate achieved at 4K Low, demonstrating that the combination of high resolution and maximum settings overwhelms the GPU's 6 GB memory and 288.0 GB/s bandwidth. For a playable experience, users would need to prioritize either resolution or settings, as the system cannot sustain both simultaneously.
GPU Role
The NVIDIA GeForce GTX 1660 Ti is a Turing-architecture GPU built on a 12 nm process, featuring 1536 shading units and 48 ROPs. Its memory configuration of 6 GB GDDR6 on a 192-bit bus provides a bandwidth of 288.0 GB/s, which is a critical specification for The Technomancer's texture-heavy environments. The GPU's base and boost clocks are 1500 MHz and 1770 MHz respectively, with memory running at 1500 MHz or 12 Gbps effective.
The benchmark results indicate that the GPU's average score of 13925 places it in the 55th percentile of all GPUs, with its nearest rival being the AMD Radeon RX 570X (0.4% faster) and the NVIDIA Tesla K10 (0.7% slower). This mid-range positioning is reflected in the measured FPS, where the card delivers playable frame rates at 1080p but struggles at higher resolutions. The 4K Ultra result of 20.4 FPS is particularly telling, as it suggests the 6 GB frame buffer is insufficient for the game's highest quality textures at that resolution.
The GPU's DirectX 12 score of 51 in Passmark indicates limited asynchronous compute capabilities, which may explain why the performance scaling from Medium to High settings is not linear. At 1080p, the jump from Medium (83.7 FPS) to High (72.8 FPS) costs 10.9 FPS, while the jump from High to Ultra (58.2 FPS) costs 14.6 FPS. This increasing marginal cost per settings tier suggests that the card's shading units and texture units are working near their limits.
How This Combo Ranks
In the database of tested combinations, this pairing of Intel Core i7-14700K and NVIDIA GeForce GTX 1660 Ti ranks 1448 out of 1656 total combos for The Technomancer. This places it in the bottom 12.5% of all tested configurations, which is unsurprising given that the GPU is from the GeForce 10-series and is now end-of-life. The rank reflects the system's inability to handle the game's demands at high resolutions and settings, despite the CPU's top-tier performance.
The CPU's percentile rank of 96 among all processors, with an average benchmark score of 70074, puts it in elite company. Its nearest rivals include the Intel Core i7-14700KF (0% delta), AMD EPYC 9115 (0.3% faster), and AMD Ryzen 9 9950X (0.5% slower). However, this processing power is wasted in this pairing because the GPU becomes the limiting factor long before the CPU's capabilities are exhausted. The combo rank demonstrates that the GTX 1660 Ti holds back the i7-14700K, as the CPU could easily drive a much more powerful GPU in this game.
The low combo rank is a direct consequence of the GPU's 55th percentile standing. While the i7-14700K is in the top 4% of all CPUs, the GTX 1660 Ti is merely average, creating a significant imbalance. The data shows that the system's performance ceiling is defined by the GPU, not the CPU, which is a critical consideration for any benchmark interpretation.
Measured FPS Breakdown
At 1920x1080, the system delivers its best results. Low settings produce an average of 112.3 FPS, which is the highest frame rate recorded across all configurations. Medium settings yield 83.7 FPS, High settings 72.8 FPS, and Ultra settings 58.2 FPS. These numbers indicate that 1080p is the only resolution where the system can consistently exceed 60 FPS at High settings, and even Ultra settings remain playable.
Moving to 2560x1440, the performance drops significantly. Low settings average 70 FPS, which is a 37.7% reduction from 1080p Low. Medium settings fall to 54.5 FPS, High to 48.5 FPS, and Ultra to 36 FPS. The 1440p results show that only Low settings maintain a frame rate above 60 FPS, while Ultra settings dip below the 40 FPS threshold, indicating a stutter-prone experience.
At 3840x2160, the system struggles to maintain playability. Low settings average 38 FPS, Medium 31.3 FPS, High 28.4 FPS, and Ultra just 20.4 FPS. None of the 4K configurations reach 60 FPS, and even the lowest settings cannot sustain a smooth 30 FPS. The 4K Ultra result is particularly poor, representing less than half the frame rate of 1080p Ultra (58.2 FPS). This data confirms that 4K gaming is not viable with this GPU unless users are willing to accept significant compromises.
CPU Role
The Intel Core i7-14700K is a 20-core, 28-thread processor based on Raptor Lake architecture, with a base clock of 3.40 GHz and a boost clock of 5.60 GHz. Its 33 MB of shared L3 cache and 2 MB per-core L2 cache provide substantial data throughput for gaming workloads. The CPU's multi-core performance is exceptional, as evidenced by its Cinebench R23 score of 44534 in multi-core and 6287 in single-core, placing it in the 96th percentile of all CPUs.
In the context of The Technomancer, the CPU's role is primarily to feed the GPU with draw calls and physics calculations. Given that the game was released in 2016, it is unlikely to be heavily multi-threaded, meaning the i7-14700K's 20 cores may not be fully utilized. However, the CPU's high single-core performance ensures that even older games running on a single thread will not become CPU-bound. The Passmark single-thread score of 4472 and Geekbench single-core score of 2932 confirm the processor's strength in this regard.
The data suggests that the CPU is never the limiting factor in this configuration. The FPS drops from 1080p to 4K are consistent with GPU-bound behavior, as the frame rate scales inversely with resolution. If the CPU were the bottleneck, the frame rates would remain constant across resolutions, which is not the case. The CPU's average benchmark score of 70074 is 0.3% higher than the AMD EPYC 9115 and 0.5% lower than the AMD Ryzen 9 9950X, indicating that it is among the fastest processors available, yet this power is underutilized in this pairing.
The CPU's 125 W TDP and support for DDR4 and DDR5 memory, with dual-channel memory bus, provide a robust platform for gaming. However, the GTX 1660 Ti's 120 W TDP and 6 GB memory capacity create a bottleneck that limits the overall system performance. The benchmark results clearly show that upgrading the GPU would yield far greater performance gains in The Technomancer than any CPU upgrade could provide.
Hardware Specifications
Intel Core i7-14700K
NVIDIA GeForce GTX 1660 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-14700K + NVIDIA GeForce GTX 1660 Ti in The Technomancer
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 38.0 |
| 3840x2160 | Medium | 31.3 |
| 3840x2160 | High | 28.4 |
| 3840x2160 | Ultra | 20.4 |
| 2560x1440 | Low | 70.0 |
| 2560x1440 | Medium | 54.5 |
| 2560x1440 | High | 48.5 |
| 2560x1440 | Ultra | 36.0 |
| 1920x1080 | Low | 112.3 |
| 1920x1080 | Medium | 83.7 |
| 1920x1080 | High | 72.8 |
| 1920x1080 | Ultra | 58.2 |
The Technomancer with ii7-14700K + Other GPUs
See how The Technomancer performs with the same CPU but different graphics cards.
The Technomancer with GTX 1660 Ti + Other CPUs
See how The Technomancer performs with the same GPU but different processors.
Other Games with ii7-14700K + GTX 1660 Ti
Explore FPS benchmarks for other games using this same hardware combination.